Fisher-Price 77171 Manual de usuario

Instructions

All-In-One Workshop

Model Number: 77171

Please save these instructions for future reference.

Adult assembly is required.

No tools needed for assembly.

Thank you for purchasing the Fisher-Price All-In-One

Workshop for your child. With tools and other accessories

that are just the right size for growing hands, a vise that really

works, and lots of work surfaces, the All-In-One Workshop

was designed for hours of fun and imaginative play.

Questions? We’d like to hear from you.

Call Fisher-Price Consumer Affairs, toll-free at

1-800-432-KIDS, 8 AM - 6 PM EST Monday through Friday.

Hearing-impaired consumers using TTY/TDD equipment,

please call 1-800-382-7470. Or, write to: Fisher-Price

Consumer Affairs, 636 Girard Avenue, East Aurora,

New York 14052.

Message to Parents Parts List

1 Top Shelf 1

2 Right Leg 1

3 Stencil Hook 2

4 Peg Board 1

5 Tool Hook 4

6 Table Top 1

7 Left Leg 1

8Tray 1

9 Vise 1

10 Vise Handle 1

11 Storage Bucket 1

12 Tool Holder 1

13 Stencil 2

14 Screwdriver 1

15 Wrench 1

16 Pliers 1

17 Hammer 1

18 Adjustable Wrench 1

19 Hacksaw 1

Not Shown

“Wood” Block 2

Nail 4

Screw 4

Nut 4

• Please wipe each part with a clean, dry cloth before

assembling the All-In-One Workshop.

• Please save all packaging material until assembly is

complete to ensure that no parts are discarded.

No. Description Qty.

Please keep plastic bags out of children’s

reach. Dispose of them properly.

CAUTION

Important Note: Please read the next step carefully,

before assembling the pegboard and tool hooks to the

top shelf. Make sure you assemble the inner tool hooks

before assembling the outer tool hooks.

• Align the large holes in the pegboard with the holes in

the top shelf.

• Insert each of the four tool hooks through the large

holes in the pegboard and into the top shelf in the

order shown above.

Right Leg

(Inside)

Stencil

Hooks

Top Shelf Pegboard

Tool Hooks

Left Leg

(Outside)

Assembly

Parts Diagram

• Snap a stencil hook into the holes in the inside of the

right leg.

• Snap the remaining stencil hook into the holes in the

outside of the left leg.

• Stand the right leg upright, with the inside of the leg

facing you.

• Fit the rib at the top of the right leg into the groove in

the bottom of the top shelf as shown.

• Push the right leg in the direction of the arrow to slide

the rib into the top shelf groove.

Right Leg

(Inside)

Top Shelf

Groove

Arrow

Rib

• Place the tray on the floor.

• Position the right leg with top shelf on top of the tray,

as shown.

• With the tray supporting the right leg and top shelf,

push down firmly on the top shelf to slide the rib on the

right leg completely into the groove in the top shelf.

Tray

Top Shelf

Right Leg

• Stand the right leg with top shelf upright.

• Stand the left leg upright, with the outside of the leg

facing you.

• Fit the rib at the top of the left leg into the other groove

in the bottom of the top shelf, as shown.

• Push the left leg in the direction of the arrow to slide

the rib into the top shelf groove.

Left Leg

(Outside)

Groove

Top Shelf

Rib

• With the tray on the floor, position the legs with top

shelf assembly on top of the tray as shown.

• With the tray supporting the left leg and top shelf, push

down firmly on the top shelf to slide the rib on the left

leg completely into the groove in the top shelf.

Left Leg

Top Shelf

Tray

Vise

Vise Handle

• Lay the workshop on the floor, with the pegboard

facing up.

• Fit the rear tabs on each side of the tray into the

rectangular recesses on the inside of the legs.

• Hold the workshop legs together while pushing down

on the front of the tray. Make sure the front tabs on the

sides of the tray are aligned with the front grooves in

the workshop legs.

Note: You may want the help of another person to hold

the workshop legs together while sliding the tabs on the

sides of the tray into the grooves in the legs.

• Push the tray in firmly to secure it between the

workshop legs.

• Stand the workshop upright.

• Insert the end of the vise handle through the hole in

the front of the vise.

• Position the vise handle on a flat surface.

• Push firmly on the back of the vise to snap the vise

handle into the vise. Be careful to keep your fingers out

of the way!

Vise Handle

• Insert the end of the vise handle through the opening in

the front of the tray.

• Fit the tabs on the back of the vise into the slots in the

tray.

• Push down firmly on the vise to attach it to the tray.

Vise

Tabs

Right Leg Opening

Tray

Vise Handle

Slots

• Fit the pegs on the toolholder into the holes in the

outside of the right leg.

• Insert the tabs on the storage bucket into the grooves

in the outside of either leg.

• Slide the storage bucket down to secure it on the leg.

Storage

Bucket

Right Leg

Toolholder

Side View

Front

of Tray

Rectangular

Recess

Front Groove

Tool Time!

• With the workshop surface face up, slide the table top

over the tray area from the back of the workshop. Make

sure the table top slides under the table top supports.

The dual-sided table top adjusts to two positions:

workshop surface or drafting table.

Table Top Supports

Ta b l e To p

• To convert the workshop surface to a sloped drafting

table, flip the table top over and place the edge of the

table top in the groove in the tray.

• Lay the sides of the table top on the table top supports

on the legs.

Ta b l e To p

Groove

• Hang the wrench, pliers and screwdriver in the toolholder.

• Hang the hacksaw, hammer and adjustable wrench

from the tool hooks under the top shelf.

• Hang the stencils from the stencil hooks on the legs.

• Arrange the nuts, bolts, and nails on the top shelf.

• Store the blocks of “wood” in the storage bucket on the

side of the All-In-One Workshop, or in the tray area.

• The storage bucket can be attached to either workshop

leg, and can be easily moved from one leg to the other!

• Turn the vise handle clockwise to close the vise.

• Turn the vise handle counter-clockwise to open the vise.

• Hang your carpentry plans from the paper holder for

quick and easy reference. Simply slide the edge of your

paper under the paper holder.

• Keep your miscellaneous supplies in the tray area

under the tabletop.

If you have any questions about this product: In Canada, call 1-800-567-7724, or

write to: Mattel/Fisher-Price, 6155 Freemont Blvd., Mississauga, Ontario L5R 3W2.

In Great Britain, telephone 01734 770488. In Australia, call the Fisher-Price

Australian Consumer Advisory Service toll-free at 1-800-800-812, or write to:

Fisher-Price, Mattel Pty. Limited, 461 Plummer Street, Port Melbourne,

Victoria 3207.

Back View

Workshop Surface

Back View

Sloped Drafting Table

Open

Tabla de contenidos

Otros manuales de Juguete de Fisher-Price

Fisher-Price

Fisher-Price X3889 Manual de usuario

Fisher-Price

Fisher-Price J0242 Manual de usuario

Fisher-Price

Fisher-Price GEOTRAX R6358 Manual de usuario

Fisher-Price

Fisher-Price Power Wheels CLASSIC CHROME H4808 Manual de usuario

Fisher-Price

Fisher-Price BUBBLE MOWER H8910 Manual de usuario

Fisher-Price

Fisher-Price X0055 Manual de usuario

Fisher-Price

Fisher-Price BCV21 Manual de usuario

Fisher-Price

Fisher-Price ALPHASPINNER 77951 Manual de usuario

Fisher-Price

Fisher-Price 71922 Manual de usuario

Fisher-Price

Fisher-Price P6231 Manual de usuario

Fisher-Price

Fisher-Price Dance Baby Dance Classical Stacker C7483 Manual de usuario

Fisher-Price

Fisher-Price V4436 Manual de usuario

Fisher-Price

Fisher-Price BFR51 Manual de usuario

Fisher-Price

Fisher-Price Y3487 Manual de usuario

Fisher-Price

Fisher-Price CMP36 Manual de usuario

Fisher-Price

Fisher-Price SMART FORTWO P2896 Manual de uso y cuidado

Fisher-Price

Fisher-Price N1880 Manual de usuario

Fisher-Price

Fisher-Price Lil' Music Makers 2-in-1 Bach ‘n Rock Guitar... Manual de usuario

Fisher-Price

Fisher-Price Smithsonian 77897 Manual de usuario

Fisher-Price

Fisher-Price GEOTRAX P6251 Manual de usuario

Fisher-Price

Fisher-Price W3573 Manual de usuario

Fisher-Price

Fisher-Price Bounce & Spin Zebra Manual de usuario

Fisher-Price

Fisher-Price R4827 Manual de usuario

Fisher-Price

Fisher-Price DORA'S MAGIC CASTLE K3005 Manual de usuario

Manuales populares de Juguete de otras marcas

marklin

marklin 37321 Manual de usuario

Canon

Canon PAPER CRAFT Manual de usuario

GREAT PLANES

GREAT PLANES Pitts M-12S Manual de usuario

NOCH

NOCH 14261 Manual de usuario

Hausler

Hausler 450 SE V2 Manual de usuario

Dynaflite

Dynaflite Daydream Manual de usuario

MiniacRC

MiniacRC MIGHTY MINI P40 WARHAWK Manual

Kenner

Kenner Batman 63651 Manual de usuario

LEGO

LEGO 8527 Manual de usuario

iKarus

iKarus ECO 8 Manual de usuario

Multiplex

Multiplex EasyStar II Manual de instrucciones

Walkera

Walkera 38 Manual de instrucciones

Hasbro

Hasbro TRANSFORMERS BUMBLEBEE Manual de usuario

MD MXION SWD Manual de usuario

Mattel

Mattel Disney Pixar Cars Cozy Cone Spiral Rampway Manual de usuario

marklin

marklin 39671 Manual de usuario

Meccano

Meccano 15103 Manual de usuario

LEGO

LEGO TECHNIC 8735 Manual de usuario