First Light TORQ Manual de usuario
TORQ™
USER MANUAL
TABLE OF CONTENTS
Specications .......................................................2
Components .........................................................4
Battery Installation................................................5
Basic Functions ....................................................6
Lockout/Ready Mode......................................6
Momentary Mode............................................6
Primary Control...............................................7
Secondary Control..........................................7
Secondary Color.............................................7
Safety Beacon Mode ......................................8
Double-Click For Color ...................................8
Low Battery Indication ..........................................8
Head Rotation.......................................................9
Finger Loop ..........................................................9
Removable Side Panels .......................................9
Accessories ........................................................10
Lifetime Limited Warranty...................................11
1
FIRST-LIGHT USA, LLC
205 S. Main Street
Seymour, IL 61875
Phone: 877.454.4450
Fax: 877.454.4420
Email: info@rstlight-usa.com
www.rstlight-usa.com
Thank you for purchasing the First-Light USA TORQ™
Tactical Light. Please carefully review this manual prior
to use.
IMPORTANT – PLEASE READ FIRST
The intense white light emitted by the primary white
LED may cause temporary blinding, regardless
of the brightness level used. Use caution during
operation. Do not point light directly into eyes at any
distance. Not for use by children.
2
MAXFL1 STANDARD
0000cd
000m
00m
00h
155
MAXFL1 STANDARD
0000cd
000m
00m
00h
156
HIGH
0000cd
000m
00m
00h
000
MEDIUM
0000cd
000m
00m
00h
000
LOW
0000cd
000m
00m
00h
000
FL1 STANDARD MEDIUM
33h
18
LOW
152h
2
MAXFL1 STANDARD
3,400cd
116m
3m
10h*
155
HIGH
1m
10h 45m
114
SPECIFICATIONS
* Runtime until output drops below 10%
of maximum output at this setting.
3
MAXFL1 STANDARD
0000cd
000m
00m
00h
155
MAXFL1 STANDARD
0000cd
000m
00m
00h
156
HIGH
0000cd
000m
00m
00h
000
MEDIUM
0000cd
000m
00m
00h
000
LOW
0000cd
000m
00m
00h
000
FL1 STANDARD MEDIUM
33h
18
LOW
152h
2
MAXFL1 STANDARD
3,400cd
116m
3m
10h*
155
HIGH
1m
10h 45m
114
Environmental Specications
● Normal Operating Temperatures: (-20°F) to 120°F
● Waterproof
Batteries
● (2) AA Batteries
4
COMPONENTS
FINGER LOOP
LATCH
BATTERY DOOR
BEZEL
REMOVABLE
SIDE PANEL
CONTROL PANEL
LAMP HOUSING
NOTE: Any user disassembly will void the warranty.
5
BATTERY INSTALLATION
STEP 1. Open battery door by releasing the latch (as
shown below).
STEP 2. Insert two AA batteries according to polarity as
indicated on the inside of battery door.
STEP 3. Close battery door insuring latch is secure.
6
BASIC FUNCTIONS
LOCKOUT/READY MODE
The TORQ™ is factory-shipped in
Lockout Mode, a setting for preventing
accidental illumination.To unlock the
light and enter Ready Mode, press the
and buttons simultaneously and
release. The green “unlock” indicator
illuminates signaling that visible light
modes are active.
To re-enter Lockout Mode at any time
during use, press and hold the and
buttons simultaneously until the red
“lockout” indicator illuminates, then
release.
PRIMARY / SECONDARY
CONTROLS
MOMENTARY CONTROL
BUTTON
Pressing the button will turn on
the white LED in maximum output.
Releasing the button will turn off
the white LED.
MOMENTARY
CONTROL
LOCK/UNLOCK
INDICATOR
PRIMARY
CONTROL
SECONDARY
CONTROL
MOMENTARY
CONTROL
7
PRIMARY CONTROL
BUTTON
To turn on the primary (white) LED,
press and release the button.
To adjust the brightness of the primary
LED, from the on position, press
and hold the button. Release the
button at the desired brightness.
To turn off the primary LED, press and
release the button.
PRIMARY
CONTROL
SECONDARY CONTROL
BUTTON
To turn on the secondary (color)
LEDs, press and release the button.
To adjust the brightness of the
secondary LEDs, press and hold the
button. Release the button at
the desired brightness. To turn off the
secondary LEDs, press and release
the button.
SECONDARY
CONTROL
SECONDARY COLOR
SELECTION
From the off position, press and
hold the button to cycle between
the secondary LED color options.
Release the button at the desired
color.
SECONDARY
CONTROL
8
LOW BATTERY INDICATION
When the battery nears the end of its
useful life the red Lock/Unlock indicator
will begin to ash. Once the useful life
of the batteries has been reached the
TORQ™ will begin to limit its output in
order to extend run time.
DOUBLE-CLICK FOR
COLOR
While in Lockout Mode the colored
LEDs can be activated by double-
clicking the button. This illuminates
the secondary color LEDs in the
lowest brightness setting and disables
the primary white LED. Adjust the
brightness by pressing and holding
the button. When the color LEDs
are turned off, the light will return to
Lockout Mode.
SECONDARY
CONTROL
SAFETY BEACON MODE
To turn on the safety beacon, ensure
that the light is in the off position.
Press and hold the button until the
safety beacon is activated. To turn off
the safety beacon, press and release
the button.
PRIMARY
CONTROL
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Flash de First Light
First Light
First Light TORQ LE Manual de usuario
First Light
First Light TOMAHAWK MC Manual de usuario
First Light
First Light T-MAX Manual de usuario
First Light
First Light TOMAHAWK NV Manual de usuario
First Light
First Light TOMAHAWK Series Manual de usuario
First Light
First Light Tomahawk GP Manual de usuario
First Light
First Light TOMAHAWK NV Manual de usuario
