Firmtech TinyBee FZ100BS Manual de usuario

Zigbee RS232

Serial Adapter

ABOUT FZ100BS

Zigbee 2006 Support

RS232 Interface

4dBi Dipole Antenna Provided

AT Command provided

FZ100BS Manual VERSION 0.1.0

The products and operation descriptions contained herein shall be protected by copyright

law.

Any part or whole of products or operation description shall not be copied, reproduced,

translated, nor transformed into readable form by electronic device or machines, without

prior consent in writing by FIRMTECH Co., Ltd.

There might be some misprinting or technical faults in the products and operation

description which are subject to change without prior notice.

FCC Information to User

This equipment has been tested and found to comply with the limits for a Class B digital

device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide

reasonable protection against harmful interference in a residential installation. This

equipment generates, uses and can radiate radio frequency energy and, if not installed and

used in accordance with the instructions, may cause harmful interference to radio

communications. However, there is no guarantee that interference will not occur in a

particular installation. If this equipment does cause harmful interference to radio or television

reception, which can be determined by turning the equipment off and on, the user is

encouraged to try to correct the interference by one of the following measures:

• Reorient or relocate the receiving antenna.

• Increase the separation between the equipment and receiver.

• Connect the equipment into an outlet on a circuit different from that to which the receiver is

con-nected.

• Consult the dealer or an experienced radio/TV technician for help.

Caution

Modifications not expressly approved by the party responsible for compliance could void the

user’s authority to operate the equipment.

FCC Compliance Information : This device complies with Part 15 of the FCC Rules.

Operation is subject to the following two conditions: (1) This device may not cause harmful

interference, and (2) this device must accept any interference received, including

interference that may cause undesired operation

IMPORTANT NOTE:

FCC RF Radiation Exposure Statement:

This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled

environment. This equipment should be installed and operated with a minimum distance of

20 centimeters between the radiator and your body. This transmitter must not be co-located

or operating in conjunction with any other antenna or transmitter.

FZ100BS Manual VERSION 0.1.0

FIRMTECH Co., Ltd. 2005

Room B-606, Ssangyong IT Twin Tower, Sangdaewon-dong, 442-5, Jungwon-gu, Seongnam-si,

Gyeonggi-do, Korea 462-120

Homepage : www.firmtech.co.kr

Marketing Inquiry : co[email protected]

Technical Support Inquiry : techsupport@firmtech.co.kr

Tel : 82-31-719-4812

Fax : 82-31-719-4834

FZ100BS Manual VERSION 0.1.0

What is zigbee?

1. Features of Zigbee

1) Objectives of Zigbee : To realize Personal Wireless Communication for short distance and slow

speed with Low Power consumption and Low Cost, which is based on IEEE 802.15.4 Standard.

2) Frequency in Use : To use ISM(Industrial, Scientific, Medical) Band which does not require any

permission to use.

- 2.400 ~ 2.4835 GHz: 15 channels (No.11 ~25 channel)

3) Transmission Rate

- 2.400 ~ 2.4835 GHz: 250Kbps

4) Tx Power and working distance

- 1mW (0dBm) Inside: 30m, Outside: 100m

- Over 100m with 1mW

- Tx Power is subject to change depending on manufacturers.

5) Configuration

- Zigbee device is configured of Coordinator, Router and End Device.

- Coordinator configures Network

- Router expands Network

- End device participates in Network

- With 64bit address, can configure a maximum of 65536 Networks connected

6) Reliability

- Supports Network level and Device level using Authentication-Network Key and Link Key.

- Supports encrypted packet transmission using 128bit AES Encryption.

- Guarantees data reliability on the application layer using ACK option in APS Packet

- Guarantees data reliability on the physical layer using ACK option in MAC Packet.

FZ100BS Manual VERSION 0.1.0

2. Zigbee operation

< Zigbee Mesh network configuration >

) Coordinator configures the Zigbee Network.

d Device.

2) Router expands Network by connecting Coordinator or other Routers.

3) End Device participates in Zigbee network and communicates with Router or Coordinator.

Coordinator communicates with Router and En

FZ100BS Manual VERSION 0.1.0

Products overview

FZ100BS can configure Zigbee network with low power consumption and low capacity by using

Zigbee stack.

< Major features of FZ100BS >

1. Zigbee 2006 support

2. Mesh network support

3. Easy to input Serial data with DSUB-9 Connector.

4. Supports AT command, and control Devices by using the AT command.

5. Can check whether data is successfully transmitted or not by using ACK option.

6. By using Retry Option, can obtain new Zigbee Network Routes so that data re-transmission is

possible even if finding the communication route is failed for the first time.

7. Use 2.400 ~ 2.475 GHz(ISM Band) 15 channels (No.11 ~25 channel)

11 (0x0B): 2405MHZ, 12 (0x0C): 2410MHZ, 13 (0x0D): 2415MHZ,

14 (0x0E): 2420MHZ, 15 (0x0F): 2425MHZ, 16 (0x10): 2430MHZ,

17 (0x11): 2435MHZ, 18 (0x12): 2440MHZ, 19 (0x13): 2445MHZ,

20 (0x14): 2450MHZ, 21 (0x15): 2455MHZ, 22 (0x16): 2460MHZ,

23 (0x17): 2465MHZ, 24 (0x18): 2470MHZ, 25 (0x19): 2475MHZ,

※ We request the new users of FZ100BS to read the information on this description carefully before

they start to use the products.

※ Please consult Firmtech.co., Ltd if you want to configure Zigbee Network using more than 30

devices of FZ100BS

FZ100BS Manual VERSION 0.1.0

■ List of contents

IMPORTANT NOTE:.......................................................................................................................................................2

FCC RF RADIATION EXPOSURE STATEMENT:......................................................................................................2

1. PRELIMINARY USAGE OF PRODUCT.....................................................................................................................9

1-1. PRODUCT COMPONENTS.........................................................................................................................................9

1-2. FZ100BS OVERVIEW...........................................................................................................................................10

2. PRODUCT PERFORMANCE ....................................................................................................................................15

3. CURRENT CONSUMPTION .....................................................................................................................................15

4. FZ100BS IMAGE & DIMENSION ............................................................................................................................16

5. SERIAL INTERFACE..................................................................................................................................................16

6. SET VALUE OF PRODUCT......................................................................................................................................17

7. ZIGBEE NETWORK CONFIGURATION..................................................................................................................18

7-1. SERIAL COMMUNICATION (HYPER TERMINAL) PROGRAM EXECUTE......................................................................18

7-2. SET-UP FZ100BS DEVICE TYPE ........................................................................................................................20

7-2-1. FZ100BS End Device Set-up..............................................................................................................21

7-2-2. FZ100BS Router Set-up .......................................................................................................................22

7-2-3. FZ100BS Coordinator set-up..............................................................................................................23

7-3. THE ZIGBEE NETWORK CONFIGURATION USING FZ100BS .................................................................................24

7-3-1. The Zigbee Network configuration.....................................................................................................24

7-3-2. Zigbee Network Extension ...................................................................................................................24

7-3-3. Zigbee Network Participation ..............................................................................................................25

8. FZ100BS DATA TRANSMISSION ...........................................................................................................................26

8-1. TARGET DEVICE SET-UP.......................................................................................................................................26

8-1-1. Searching for an IEEE ADDRESS of FZ100BS................................................................................26

8-1-2. Target device set-up ............................................................................................................................27

8-2. DATA TRANSMISSION.............................................................................................................................................28

9. FZ100BS MANAGEMENT TIP .................................................................................................................................30

9-1. FZ100BS DEVICE TYPE SET-UP ........................................................................................................................30

9-2. ZIGBEE NETWORK CONFIGURATION .....................................................................................................................30

9-3. [SET-UP] TARGET DEVICE & TRAFFIC.................................................................................................................31

9-4. START MESSAGE .............................................................................................................................................32

FZ100BS Manual VERSION 0.1.0

9-5. RESET OPTION .................................................................................................................................................34

FZ100BS Manual VERSION 0.1.0

1. Preliminary usage of product

1-1. Product components

Model Name Pictures Q’ty

FZ100BS

1EA

FBA-UPC

1EA

WE-2405TO

1EA

※ If you find any of above components is defective, or not included in the package, please

contact the seller you purchased.

FZ100BS Manual VERSION 0.1.0

1-2. FZ100BS Overview

(1) To configure the Zigbee network, set each device (FZ100BS) to Coordinator, Router and End

Device.

The initial factory set value of FZ100BS is set to Router.

(2) Do not use Broadcast accompanied by a lot of traffic in the Zigbee network unless it is vital to be

used.

It is not recommended to make a lot of traffic in the Zigbee network because it causes lots of trouble

when transmitting data and bothers to set the new route toward target devices.

(3) Do not set short time for data transmission in the Zigbee Network. The more nodes the Zigbee

Network has, the longer time for transmission time should be set.

Example.1) Zigbee Network Contribution using 10 FZ100BSs

Set a time space to 2seconds for data transmission between FZ100BSs.

(set 2sec minimally per 10 FZ100BSs)

Example.2) Zigbee Network Contribution using 20 FZ100BSs

Set a time space to 4seconds for data transmission between FZ100BSs.

(set 2sec minimally per 10 FZ100BSs*2=4sec)

It is not recommended to make a lot of traffic in the Zigbee Network.

Tabla de contenidos

Otros manuales de Adaptador de Firmtech

Firmtech

Firmtech FBS100BC-SPP Manual de usuario

Firmtech

Firmtech FB100AS Manual de usuario

Firmtech

Firmtech FB100AS-F Manual de usuario

Firmtech

Firmtech TinyBee FZ210BS Manual de usuario

Firmtech

Firmtech FB200AS-F Manual de usuario

Firmtech

Firmtech FB200AS Manual de usuario

Firmtech

Firmtech FZ200BS Manual de usuario

Firmtech

Firmtech FB100AS Manual de usuario

Firmtech

Firmtech BM2001 Manual de usuario

Firmtech

Firmtech FB200AS Manual de usuario

Firmtech

Firmtech FB100AS Manual de usuario

Manuales populares de Adaptador de otras marcas

PCB Piezotronics

PCB Piezotronics 090B274 Manual de usuario

Auvidea

Auvidea J20 Manual del producto

Gossen MetraWatt

Gossen MetraWatt AT3-III E Manual de usuario

Akribis

Akribis ITF-21-BISS-MIT Manual de usuario

Tenda

Tenda W54U Manual de usuario

ROHO

ROHO AGILITY Manual de usuario

PROLiNK

PROLiNK WN2001 Manual de usuario

Hawking

Hawking HUF2 Manual de usuario

Airlink101

Airlink101 AWLC4030 Manual de usuario

NETGEAR

NETGEAR XAV101v1 - Powerline AV Ethernet Adapter Manual de usuario

Philips

Philips SWA4554S/10 Manual de usuario

JVC

JVC TS-C9D2B Manual de instrucciones

NETGEAR

NETGEAR A6100 Manual de usuario

D-Link

D-Link DWA-121 Manual de usuario

Philips

Philips SWA2037 Manual de usuario

Basalte

Basalte 0610-20 Manual de usuario

Yealink

Yealink EHS40 Manual de usuario

Balluff

Balluff BIC 1B0-IT1A7-Q40KFU-SM4A4A Manual de usuario