Finlux FC-9210 Manual de usuario
English - 1 -
Contents
Features ................................................................. 2
Accessories ............................................................ 2
Safety Precautions ................................................. 3
Overview of the Remote Control ............................ 4
Connections............................................................ 5
Remote Control ...................................................... 6
Connection to the TV.............................................. 6
Power Connection .................................................. 7
Power On-Off.......................................................... 7
Antenna Connection............................................... 7
USB Connection..................................................... 8
USB Disc Connection ......................................... 8
Main Menu System................................................. 9
Channel List............................................................ 9
Settings................................................................. 12
Installation......................................................... 12
Conguration .................................................... 12
Language Settings............................................ 14
Media Browser ..................................................... 15
Timers................................................................... 16
OSD message ...................................................... 17
Channel Navigation .............................................. 17
Displaying Text ..................................................... 18
Specications ....................................................... 18
Remote Control .................................................... 18
Digital Capabilites................................................. 18
TV Scart................................................................ 19
Trouble Shooting .................................................. 20
English - 2 -
Features
•DVB
• Channel capacity: 1000
• DVB 7 days event information (7 days EPG)
• TV scart (with RGB and CVBS support)
• Last watched channel saving
• Automatic search for all channels
• Timer function programmable via EPG
• Favourite list
• HDMI output: 576p, 720p, 1080i, 1080p.
• USB input
• Parental lock options at different levels
• DVB-C Compliant
• Input frequency range: VHFIII; 174–230 MHz, 7MHz
bandwith
• UHFIV and UHFV; 470-862 MHz, 8MHz bandwith
• Supports 16-, 64-QAM modulations
• Manual and automatic search options
• VIDEO & OSD :
• Video: MPEG2, PAL, 4:3/16:9
• MPEG-4 H.264/AVC MP@L 3 (SD) Video Decoder
• Decoding & Video Out: PAL
• Audio: MPEG-1 layer I / II, MPEG-2 layer II, MPEG-2
AAC, MPEG-4 AAC
• Multi-format audio decoder
• Multi language audio support (up to 10)
• Audio mute and volume control
• Low power consumption (less than 0,5W) (Optional)
Accessories
Remote Control
Batteries
2 X AAA
AC Adaptor
AC Adaptor
Instruction Book
English - 3 -
Safety Precautions
Power Source
• Always use the provided AC adaptor.
• Operate only from the power source specied
on the AC adaptor.
• The power adaptor may become hot during
normal operation. This is not a malfunction.
• Please make sure that the adaptor is not
covered while in operation. Leave a space
of 15 cm (minimum) around the AC adaptor.
• The rating information and safety caution of
the AC adaptor are provided on the adaptor.
WARNING: When the set is not in use for a long
time, disconnect from the power.
Power Cord
Do not place the unit, a piece of furniture, etc.,
on the power cord, or pinch the cord. Handle the
power cord by the plug. Do not pull out the plug by
tugging the cord and never touch the power cord
when your hands are wet as this could cause a
short circuit or electric shock. Never make a knot
in the cord or tie it with other cords. The power
cords should be routed in such a way that they
are not likely to be stepped on. A damaged power
cord can cause re or give you an electrical shock.
Check the power cord once in a while. When you
nd it damaged, ask closest service agent for help.
• Please do not place the set in a place subject
to direct sun light, excessive dust or mechanical
shock or in a location near heat sources.
• The set should be placed on a solid and safe
base. Do not place the apparatus on a soft
surface such as a rug that might block the
ventilation holes on the bottom.
• A location such as a room with high humidity
should not be selected as the condensation,
arising in the kitchen for example, may cause
malfunction or damage the set.
• Heating or other thermal radiation under the set
also may cause malfunction or damage the set.
• The hot air, which arises during the operation,
should be ventilated with sufcient air circulation.
Please do not put the set into closed areas and
do not cover it.
• Please avoid the contact of the set with water
or humidity. Do not put into operation near bath,
swimming pools.
• Take care to provide a good air circulation.
Place the apparatus in a location with adequate
ventilation to prevent heat build-up in the
apparatus.
• If any solid object or liquid falls into the cabinet,
unplug the apparatus and have it checked by
a qualied personnel before operating it any
further.
Apparatus shall not be exposed to dripping or
splashing and no objects lled with liquids such
as vases shall be placed on the apparatus.
CAUTION
Batteries shall not be exposed to excessive heat
such as sunshine, re or the like.
English - 4 -
Overview of the Remote Control
Navigation
Electronic Programme Guide
Info
Channel Up / Down
Subtitle
Timers
Menu
StandBy
TV/Radio Mode
Left/Right Sound
Numeric buttons
Favourite List
Mute
Volume Up / Down
Back
OK
No function
No function
Display Teletext
Coloured buttons
Previous Programme
Aspect Ratio
Language
English - 5 -
Rear Panel
Front Panel
DC IN: To connect the power adaptor(12V).
Antenna In: To connect Aerial/Cable plug
Antenna Out: To watch analogue channels on the TV
HDMI: To connect the box to your TV’s HDMI input (if available) by using
HDMI connection cable.
Digital Audio Out (Optical): To output the digital audio to an external
device. See your audio system instruction book for further information.
Scart Out: To connect the box to your TV using a scart cable.
Make sure that you connect all cables and connections before you plug the
units adaptor into the mains supply.
Connections
1. POWER/STAND-BY
2. USB-PORT: To connect USB-stick/-device for media playback
English - 6 -
Remote Control
First open the battery cover on the underside of the remote control. Put in both batteries 1.5Volt
(RO3/AAA) referring to the imprinted symbols (+/-) in the battery case and put on the battery
cover again. While using the remote control, direct it towards the front side of the receiver. If
the remote control does not work or the chosen function does not work, the batteries are most
probably exhausted and they should be replaced as soon as possible. Please use only the leak
proof batteries. It is best to remove the batteries from the remote unit if you will not be using the
remote control unit for long time.
Connection to the TV
HDMI
connection
SCART connection
You can connect the set top box to your TV by using the scart socket or HDMI input. Use a scart or
HDMI cable to connect the set top box to your TV. HDMI technology will provide you high quality
picture performance. To get the best HD quality, TV connection via HDMI is advised.
The set top box gives RGB or CVBS output from scart or high denition quality from HDMI output.
English - 7 -
Power Connection
IMPORTANT: The set-top box is designed to operate on 12 V DC. For this, an adaptor is used which
gives 12 V voltage. Connect this adaptor to a system that supplies 220-240V AC, 50Hz.
After unpacking, allow the set-top box to reach the ambient room temperature before you connect the set to
the mains.
Power On-Off
Be sure that you put through all the cable connections. After plugging in the AC adaptor for the
set-top-box to the mains supply, a LED will be seen on the front panel (Standby mode). When the
set-top-box is rst powered up please wait for a while before activating the receiver since booting
of software will take some time. Then, you can turn on your digital set-top box by pressing the
standby button on the remote control. You will see that the LED on the front panel will change
(Power on mode).
Auto Power Down:
This box will automatically be switched from active mode into standby mode, after less than three
hours in active mode, following the last user interaction and/or a channel change with an alert
message two minutes before going to standby mode. The Automatic power-down will be set as
default and the user will be able to change Automatic power down to on or off in the menu
Antenna Connection
This illustration shows how to connect an antenna. Use ANTENNA IN to connect to an antenna
system. You can also use TV OUT to connect antenna to your TV through the set top box with
an appropriate antenna cable.
English - 8 -
USB Connection
• You can connect a USB hard disc drive or USB memory stick to your box by using the USB input
. This feature allows you to play les stored in a USB drive.
• 2.5” and 3.5” inch (hdd with external power supply) external hard disk drives are supported.
IMPORTANT !
• You may back up your les before making any connections to the box in order to avoid any possible
data loss. Note that manufacturer will not be responsible for any le damage or dataloss.
• It is possible that certain types of USB devices (e.g. MP3 Players) or USB hard disc drives/
memory sticks may not be compatible with this device.
IMPORTANT: The device supports only FAT32 disk formatting. NTFS format is not supported.
If you connect a USB disc with NTFS format, you will be asked to format the content. See the
section “Format Disc” in the following pages for more information on disk formatting. Note that
ALL the data stored on the USB disc will be lost and then the disk format will be converted to
FAT32 in such a case.
USB Disc Connection
• Plug your USB device to the USB input of the box.
Note: Plug or unplug your USB disc while the box is switched off.
Note: If you are going to connect a USB hard disc drive to the box, USB connection cable used between the
disk drive and the box should have a USB logo and be as short as possible.
Note: While formatting a USB hard disc that has 1TB (Tera Byte) or more le capacity, you can experience
problems with the formatting process. In such a case, you should format the disk with your personal computer
and the formatted disk type should be FAT32.
CAUTION !
• Plugging and unplugging USB devices swiftly is a hazardous operation. Plugging and unplugging
repeatedly may cause physical damage to the•USB player and the USB device itself.
Do not pull out USB module while playing a le.
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
