Finero DCP-1500-05 Manual de usuario

User Manual

Power Supply DCP-1500-05

Generalvertretung Deutschland:

TESTEC Elektronik GmbH

Westerbachstr. 58

0489 Frankfurt am Main

Telefon: +49 (0) 9 943335 0

Telefax: +49 (0) 9 943335 55

e-mail: info@testec.de

Internet: www.testec.de

FST-DCP-1500-05 HIGH VOLTAGE POWER SUPPLY 2283

USER MANUAL

22/01/2010 12:52 PM AT

UserManual FST-DCP-1500-05 HighVoltagePowerSupply 100122EN

ver1.doc

1/27

------------------------------------------------------------------

Finero Oy –The Quality Control Company Tel. +358-5-7522 200

Haltonintie 5, FIN-47400 KAUSALA, FINLAND Fax +358-5-3638 326

www.qacontrol.com [email protected]

TABLE OF CONTENTS

1 TECHNICAL INFORMATION.................................................................................................5

2 GENERAL .............................................................................................................................. 6

2.1 Tester ..........................................................................................................................................................................................6

2.2 Tester control modes............................................................................................................................................................6

2.3 Construction.............................................................................................................................................................................6

2.4 Calibration.................................................................................................................................................................................6

2.5 Development............................................................................................................................................................................6

2.6 Accessories................................................................................................................................................................................7

3 SAFETY PRECAUTIONS ........................................................................................................8

3.1 General........................................................................................................................................................................................8

3.2 High voltage..............................................................................................................................................................................8

4 INSTALLATION ........................................................................................................................9

4.1 General........................................................................................................................................................................................9

4.2 Mounting into 19” module –rack or case......................................................................................................................9

4.3 High voltage connectors................................................................................................................................................... 10

4.4 External Safety Circuit, Emergency Switches.......................................................................................................... 10

4.5 Mains supply ......................................................................................................................................................................... 10

5 MANUAL OPERATION ........................................................................................................ 11

5.1 General..................................................................................................................................................................................... 11

5.2 Start-Up................................................................................................................................................................................... 11

5.3 Buttons and indicators...................................................................................................................................................... 11

5.4 Control menu and commands........................................................................................................................................ 12

5.5 Voltage increase method (Ramp)................................................................................................................................. 12

5.6 Testing ..................................................................................................................................................................................... 12

5.10 Error displays..................................................................................................................................................................... 13

6 OPERATION WITH COMPUTER......................................................................................... 14

6.1 General..................................................................................................................................................................................... 14

6.2 Connections........................................................................................................................................................................... 14

6.3 Control software.................................................................................................................................................................. 14

7 REMOTE CONTROL AND LOGIC OPERATION ................................................................... 15

7.1 General..................................................................................................................................................................................... 15

7.2 Start-up.................................................................................................................................................................................... 15

7.3 Logic Connections............................................................................................................................................................... 15

8 MALFUNCTIONS ................................................................................................................. 16

8.1 General..................................................................................................................................................................................... 16

8.2 No indicator is lit ................................................................................................................................................................. 16

8.3 Power indicator is lit but the display is not.............................................................................................................. 16

8.4 Indicators are lit but buttons don't function............................................................................................................ 16

FST-DCP-1500-05 HIGH VOLTAGE POWER SUPPLY 2283

USER MANUAL

22/01/2010 12:52 PM AT

UserManual FST-DCP-1500-05 HighVoltagePowerSupply 100122EN

ver1.doc

2/27

------------------------------------------------------------------

Finero Oy –The Quality Control Company Tel. +358-5-7522 200

Haltonintie 5, FIN-47400 KAUSALA, FINLAND Fax +358-5-3638 326

www.qacontrol.com [email protected]

8.5 Tester functions but high voltage is missing or voltage output is wrong.................................................... 17

8.6 Tester functions but “External control”-connections not working................................................................ 17

9 LIMITED WARRANTY ........................................................................................................ 18

ANNEX A - FST-DCP-1500-05 HIGH VOLTAGE POWER SUPPLY - COMMAND LIST

Any non-authorized modification, repair, tampering or physical damage or if the product has been

subject to gross misuse will void this warranty. Elimination of any connections in the earth ground-

ing system or bypassing any safety systems will void this warranty. Parts subject to wear, such as

test probes and leads, are not covered by this product warranty, except where they are deemed

to have a manufacturing defect within 60 days of the original shipment of the Finero product.

FST-DCP-1500-05 HIGH VOLTAGE POWER SUPPLY 2283

USER MANUAL

22/01/2010 12:52 PM AT

UserManual FST-DCP-1500-05 HighVoltagePowerSupply 100122EN

ver1.doc

3/27

------------------------------------------------------------------

Finero Oy –The Quality Control Company Tel. +358-5-7522 200

Haltonintie 5, FIN-47400 KAUSALA, FINLAND Fax +358-5-3638 326

www.qacontrol.com [email protected]

Dear Customer,

Thank you for purchasing Finero test and measurement equipment. Finero is obliged to

provide you with the best on the market available test and measurement equipment. The 30

years of Finero experience in most demanding production applications is made available to

you in this piece of equipment.

We are confident that this equipment will support your endeavors to keep up the good quality

of your production.

If you have any comments about Finero products, software or services I would like to hear of

them.

Yours truly,

Risto Vuolle

Chief Executive Officer

Finero Inc.

Kausala, Finland

FST-DCP-1500-05 HIGH VOLTAGE POWER SUPPLY 2283

USER MANUAL

22/01/2010 12:52 PM AT

UserManual FST-DCP-1500-05 HighVoltagePowerSupply 100122EN

ver1.doc

4/27

------------------------------------------------------------------

Finero Oy –The Quality Control Company Tel. +358-5-7522 200

Haltonintie 5, FIN-47400 KAUSALA, FINLAND Fax +358-5-3638 326

www.qacontrol.com [email protected]

All information is subject to changes without prior notice.

DELIVERY SCOPE LIST

Although Finero packages the equipment with utmost care you should check the package

regarding any delivery damages. If the equipment is damaged you should contact your insur-

ance company directly and inform Finero as well about the matter. Please include photos if

possible.

The package should include in minimum following documents and materials:

FST-DCP-1500-05 1pc

Mains cable 1 pc

User Manual 1 pc

Calibration Certificate 1 pc

HV test lead, red 2 pc

FST-DCP-1500-05 HIGH VOLTAGE POWER SUPPLY 2283

USER MANUAL

22/01/2010 12:52 PM AT

UserManual FST-DCP-1500-05 HighVoltagePowerSupply 100122EN

ver1.doc

5/27

------------------------------------------------------------------

Finero Oy –The Quality Control Company Tel. +358-5-7522 200

Haltonintie 5, FIN-47400 KAUSALA, FINLAND Fax +358-5-3638 326

www.qacontrol.com [email protected]

1 TECHNICAL INFORMATION

Type: FST-DCP-1500-05

Serial number: See back of device

Size: 483x148x410 (width, height, depth)

Designed to 19”-eurorack, height 3U 133mm, without legs

Weight: about 25 kg

Operation voltage: 230VAC (10%) 50Hz 1~phase

Operation power: 800VA

Connection: Cable plug, equipment earth

Main fuses: 4A slow 5x20mm glass inside of power connector

Environment temperature: +5°C...+35°C

Environment conditions: Dry and no dusty

Output voltage: 0V...2000V dc voltage (not filtered, only rectifier)

Meter 0...2000V, analogy meter reading 50V

Output current: max. 1000mA, max power 750VA

Measurement range: 0...1000mA

Output connections: Back high voltage sockets

Remote control: Start, stop, test, fail and safety circuit 24VDC

D25-female -connector in back panel

Computer connection: RS-232 (assessor) D9 female-connector or IEE488 (asses-

sor) or USB(A) (assessor) in back panel. Board can use

controlled other FST-series tester.

Tester control connector: Modular Cat5 8-pin connector 2pcs. This device are possi-

ble connection to other FST-series tester (where RS-232

or IEE488 or USB-board are), then are possible control

this device via computer.

FST-DCP-1500-05 HIGH VOLTAGE POWER SUPPLY 2283

USER MANUAL

22/01/2010 12:52 PM AT

UserManual FST-DCP-1500-05 HighVoltagePowerSupply 100122EN

ver1.doc

6/27

------------------------------------------------------------------

Finero Oy –The Quality Control Company Tel. +358-5-7522 200

Haltonintie 5, FIN-47400 KAUSALA, FINLAND Fax +358-5-3638 326

www.qacontrol.com [email protected]

2 GENERAL

2.1 Tester

The High Voltage Power Supply is intended for testing of voltage range 0 to 2000 V DC test

voltage provided by a 750 VA transformer. The Tester measures the current. The current limit

is settable at current range 0 to 1000 mA.

2.2 Tester control modes

The Power Supply can be controlled either locally by means of front panel buttons, indicators

and analogy meter or in automatic test systems by a computer via RS-232 or IEE488 or USB

connection. Also logic or remote control of basic functions is possible.

2.3 Construction

The Power Supply is built in a 19" frame having height of 3U. The installation depth is about

370 mm. Also front panel components are about 40mm. There are handles of tester both sides

and legs below tester. Legs must be taken off if tester assembled to 19” rack.

2.4 Calibration

The Power Supply is factory tested and calibrated to meet the accuracy requirements. The

equipment may be calibrated in our factory or by other means agreed separately. There are

removed measurement module, which can send to calibrated

2.5 Development

Due continuous development we reserve the right to make technical modifications to our

products without notice. Device's activity can deviate to some degree in this instruction from

the said resulting customized or other changes.

FST-DCP-1500-05 HIGH VOLTAGE POWER SUPPLY 2283

USER MANUAL

22/01/2010 12:52 PM AT

UserManual FST-DCP-1500-05 HighVoltagePowerSupply 100122EN

ver1.doc

7/27

------------------------------------------------------------------

Finero Oy –The Quality Control Company Tel. +358-5-7522 200

Haltonintie 5, FIN-47400 KAUSALA, FINLAND Fax +358-5-3638 326

www.qacontrol.com [email protected]

2.6 Accessories

There are available different accessories, systems and calibrators for test device.

FST-DCP-1500-05 HIGH VOLTAGE POWER SUPPLY 2283

USER MANUAL

22/01/2010 12:52 PM AT

UserManual FST-DCP-1500-05 HighVoltagePowerSupply 100122EN

ver1.doc

8/27

------------------------------------------------------------------

Finero Oy –The Quality Control Company Tel. +358-5-7522 200

Haltonintie 5, FIN-47400 KAUSALA, FINLAND Fax +358-5-3638 326

www.qacontrol.com [email protected]

3 SAFETY PRECAUTIONS

3.1 General

The operator should study carefully the instruction manuals and operation of the Power

Supply as well as testing instructions for the product to be tested before starting any tests. As

safety precaution the operator should be aware of emergency first aid actions.

3.2 High voltage

The high voltage connectors in rear panel have a dangerous high voltage during the test. The

current supplied by the Power Supply is high enough to cause convulsion and danger to get

trapped on the parts under high voltage.

Depending on principle of the test and equipment used a possibility to touch the high voltage

connectors should be avoided by all means. If other pole connected to test device ground the

risk for getting electric shock increases. For manual tests we recommend special test heads

having heads protected if not in use or use of a special test chamber.

FST-DCP-1500-05 HIGH VOLTAGE POWER SUPPLY 2283

USER MANUAL

22/01/2010 12:52 PM AT

UserManual FST-DCP-1500-05 HighVoltagePowerSupply 100122EN

ver1.doc

9/27

------------------------------------------------------------------

Finero Oy –The Quality Control Company Tel. +358-5-7522 200

Haltonintie 5, FIN-47400 KAUSALA, FINLAND Fax +358-5-3638 326

www.qacontrol.com [email protected]

4 INSTALLATION

4.1 General

The Power Supply is designed for standard 19" rack or case. Height is 3U (133 mm). Depth is

about 370 mm and connectors need about 150mm space from rear. The handles mounted on

the front panel are elevated about 40 mm from the panel. The Power Supply is not allowed to

carry from the handles but by having a stable hold in the frame.

The Power Supply can be used in its own case only in dry and clean environment but care

must be taken nothing goes into the case through ventilation openings. The ventilation,

however, should not be prevented.

4.2 Mounting into 19” module –rack or case

When installed into a rack or a similar case it is mandatory to use mounting rails due to the

weight of the device. The holes in the front panel are intended for locking the device in its

place not for backing the whole device. If there are legs below of tester, they must take off

before installation to 19” rack. Care must be taken of the air circulation in the rack in order to

avoid temperature rise above +35°C.

Here are some examples of how build the support for rack installation.

Tabla de contenidos

Otros manuales de Fuente de alimentación de Finero

Finero

Finero FST-160 Manual de usuario

Manuales populares de Fuente de alimentación de otras marcas

Monacor

Monacor PS-12CCD Manual de usuario

VOLTIMA

VOLTIMA MagicBox 15 Manual de usuario

Agilent Technologies

Agilent Technologies 6032A Manual de usuario

Miller

Miller Auto Deltaweld 452 Manual de usuario

BCP

BCP PUOUBK Hoja de instrucciones

HC 2210 Manual de usuario

Puls

Puls CT5.241 Manual de usuario

OCZ

OCZ ZX1250W Manual de usuario

iseg

iseg ECH 238 Manual de usuario

Power

Power XXL A Series Manual de usuario

Agilent Technologies

Agilent Technologies 6631B Manual de usuario

Renogy

Renogy PHOENIX 300 Manual de usuario

HP 6200B Manual de servicio

Epson

Epson Stylus Scan 2500 Manual de funcionamiento

Pulsar

Pulsar GREEN POWER CCTV PoE POE044816 Manual de usuario

Puls

Puls MiniLine ML50.100 Manual de usuario

Puls

Puls AS-Interface SLA4.100 Manual de usuario

Kenwood

Kenwood PS-60 Manual de usuario