http:// www.fineart-light.com
- 4 -
Protection against explosion
Shields lenses and ultraviolet screens must be replaced if they
have become visible damaged to such an extent that their
effectiveness is impaired.
Replace the lamp immediately if it becomes visually deformed,
damaged or in any way defected.
Protection against electrical shock
Must disconnect the power supply when install, or remove of
bulbs, fuses and other components. Meanwhile using the ground-
ing must be closed to the ground.
Make sure that the mains power supply you use is up to local
construction and electronic code regulation, the over-load
protection earthing is essential.
Do not expose the device to rain or moisture.
All the equipment maintenance must be performed by a qualified
person with technical certificate.
Protection against ultraviolet radiation and light bulb explodes
Never operate the fixture with missing or damaged lenses and/or
covers.
Protecting your hands and eyes with
gloves and glasses, make the equipment
cool down at least 15 minutes.
Prolonged exposure to an unshielded
discharged lamp can cause eye and skin
burns.
Need to replace the broken bulb and the
bulb is to be replaced before the useful life.
Protection against burning or fire
Do not attempt to bypass the thermostat switch or fuse, replace
defective fuses with specified ratings only.
Keep flammable materials far away from the fixture (fiber, food,
and paper). Minimum distance from the flammable material is 1
meter.
