Fike FIK-UV-IR-HD Series Manual de usuario

FIK-UV-IR-HD User Manual Doc. No. 06-935.02

704 SW 10th St, Blue Springs, MO 64014, USA T: (+1) 816-229-3405

www.fike.com

FIK-UV-IR-HD Flame Detector

FIK-UV-IR-F-HD Flame Detector

FIK-UV-IR-HD User Manual Doc. No. 06-935.02

For more information & Technical support: (800)-979-FIKE (3453) i

FIK-UV-IR-HD UV/IR Flame Detector User Manual, November 2019

The owner or authorized user of a valid copy of this manual may reproduce this publication for the purpose of

learning to use the specified equipment. No part of this publication may be reproduced or transmitted for

commercial purposes, such as selling copies of this publication or for providing paid for support services.

The Fike logo is a trademark of Fike Corporation, registered in the U.S. and other countries.

Every effort has been made to ensure that the information in this manual is accurate. However, Fike is not

responsible for any inaccuracy or omission in this document. The information in this document is subject to change

without notice.

FIK-UV-IR-HD User Manual Doc. No. 06-935.02

For more information & Technical support: (800)-979-FIKE (3453) ii

Table of Contents

Contents

1. Introduction ......................................................................................................................................................1

1.1 Key Features................................................................................................................................................1

1.2 Model Number Description.........................................................................................................................2

1.3 Internal tests ...............................................................................................................................................2

2. Installation.........................................................................................................................................................3

2.1 General Considerations...............................................................................................................................3

2.2 Preparations for Installation .......................................................................................................................4

2.3 Required Tools ............................................................................................................................................4

2.4 Certification Instructions.............................................................................................................................4

2.4.1 Specific conditions for use ...................................................................................................................5

2.5 Installing the Tilt Mount.............................................................................................................................. 5

2.6 Installing the detector.................................................................................................................................6

3. Configuration options .......................................................................................................................................8

3.1 Sensitivity ....................................................................................................................................................8

3.2 Ultra-Fast Detection....................................................................................................................................9

3.3 Alarm Delay.................................................................................................................................................9

3.4 Alarm Latch .................................................................................................................................................9

3.5 Window Heater ...........................................................................................................................................9

3.6 Video settings..............................................................................................................................................9

3.7 Modbus Address .......................................................................................................................................10

3.8 Manual BIT – Alarm Output Test...............................................................................................................10

4. Detector Wiring...............................................................................................................................................10

4.1 Wiring Functions: ......................................................................................................................................11

4.2 Current Output (0-20mA) Wiring ..............................................................................................................12

4.3 RS-485 Communication Network..............................................................................................................13

5. Operation ........................................................................................................................................................15

5.1 Output Signals ...........................................................................................................................................15

5.2 Testing.......................................................................................................................................................15

5.3 Maintenance .............................................................................................................................................16

5.3.1 Cleaning Procedure ............................................................................................................................16

5.4 Troubleshooting ........................................................................................................................................17

FIK-UV-IR-HD User Manual Doc. No. 06-935.02

For more information & Technical support: (800)-979-FIKE (3453) iii

6. Specifications ..................................................................................................................................................18

6.1 Fire Detection............................................................................................................................................18

6.2 Video functionality ....................................................................................................................................18

6.3 Electrical Specifications.............................................................................................................................18

6.4 Outputs .....................................................................................................................................................18

6.5 Mechanical Specifications .........................................................................................................................19

6.6 Environmental Specifications....................................................................................................................19

6.7 Label Figures..............................................................................................................................................20

6.8 Approvals ..................................................................................................................................................21

6.9 Electromagnetic Compatibility..................................................................................................................21

7. Warranty .........................................................................................................................................................22

Response Characteristics FIK-UV-IR-HD.............................................................................23

A.1 Response to different fire scenarios ..................................................................................................23

A.2 False Alarm Immunity.........................................................................................................................23

Response Characteristics FIK-UV-IR-F-HD..........................................................................24

B.1 Response to different fire scenarios ..................................................................................................24

B.2 False Alarm Immunity.........................................................................................................................26

FIK-UV-IR-HD User Manual Doc. No. 06-935.02

For more information & Technical support: (800)-979-FIKE (3453) iv

List of Figures

Figure 1- Tile Mount Base - Rear View ..................................................................................................................6

Figure 2- Tile Mount Base - Side View...................................................................................................................6

Figure 3- Detector on Tilt Mount - Side View........................................................................................................7

Figure 4- Source 4 Wire Scheme .........................................................................................................................12

Figure 5- Sink 4 - Wire Scheme............................................................................................................................12

Figure 6- Source 3 - Wire Scheme .......................................................................................................................13

Figure 7- Sink 3 - Wire Scheme............................................................................................................................13

Figure 8- RS-485 Networking...............................................................................................................................14

List of Tables

Table 1 - Detector Configuration Options .............................................................................................................8

Table 2- Sensitivity Levels......................................................................................................................................9

Table 3- Terminal Connections............................................................................................................................11

Table 4- Output Signals .......................................................................................................................................15

Table 5- Troubleshooting Guide..........................................................................................................................17

FIK-UV-IR-HD User Manual Doc. No. 06-935.02

For more information & Technical support: (800)-979-FIKE (3453) 1

1. Introduction

The FIK-UV-IR-HD flame detector provides ultra-fast response, high performance and reliable detection of a

large variety of fires including hydrocarbon fires (visible and non-visible), as well as hydrogen fires.

The detector addresses slow growing fires as well as fast eruptions of fire using improved UV-IR technology.

The detector operates in all weather and light conditions. The detector provides high-definition (HD) video

output of the monitored area with clear imaging of a fire event and of personnel at distances up to 100 ft

(30m) allowing rescuers to discover the exact situation before entering the hazardous area. It will

automatically record a video of a fire event (1 min pre-alarm/up to 3 mins post-alarm).

The integral HD quality video, with event recording, on top of the proven superior capabilities of UV-IR flame

detection together provide a very powerful safety tool to protect your personnel, plant and process.

This manual covers two UV/IR detector models:

1. FIK-UV-IR-HD: Hydrogen and hydrocarbons flame detection. Spectrum response of IR radiation in the

3.0-4.0-micron range.

2. FIK-UV-IR-F-HD: Hydrocarbon flame detection. Spectrum response of IR radiation in the 4.0-5.0-

micron range

1.1 Key Features

•High immunity: To false alarm

•Ultra-fast detection mode: Within 5 milliseconds for Hydrogen fireballs or explosions

•Hydrogen and hydrocarbons flame detection

•High sensitivity: Up to 100 ft. (30m) for a 1ft2 (0.1m2) n-heptane pan fire

•HD video output: With automatic HD video recording of fire events

•Data/Event logger: Alarms, faults and other relevant events are logged to non-volatile memory

•Ethernet communication: In addition to the standard methods, such as 4-20mA and Modbus

•Built-in-Test (BIT): Automatic and manual internal self-test of window cleanliness and the overall

operation of the detector (for both IR and UV channels)

•Window heater: To avoid condensation and icing

•Tilt mounting bracket: Can be connected either above or below the detector

•UV and IR warning levels - 0-20mA - current output warning when elevated UV or IR radiation is

detected.

FIK-UV-IR-HD User Manual Doc. No. 06-935.02

For more information & Technical support: (800)-979-FIKE (3453) 2

1.2 Model Number Description

Model No are defined as follows:

FIK-UV-IR-F-HD-AS11 – Detector, hydrocarbon fire only, M25 conduit openings

FIK-UV-IR-F-HD-AS21 – Detector, hydrocarbon fire only, ¾” NPT conduit openings

FIK-UV-IR-HD-AS11 – Detector with HD video output, M25 conduit openings

FIK-UV-IR-HD-AS21 – Detector with HD video output, ¾” NPT conduit openings

1.3 Internal tests

During normal operation, the flame detector performs self-tests of its optics, electronics and software.

These include a periodic BIT (Built-In-Test) in which the sensors and window cleanliness are tested. Any

detected fault is indicated as shown in Table 4 (in section 5.1). During “Dirty Window” fault the detection

sensitivity is significantly reduced, while “Fault” refers to critical faults which totally prevent flame

detection.

FIK-UV-IR-HD User Manual Doc. No. 06-935.02

For more information & Technical support: (800)-979-FIKE (3453) 3

2Installation

The detector is intended for use as part of a complex system where many detectors and other

devices are integrated with different vendors’ systems and interface communication to a variety

of different types and configuration control units and panels including control of

instrumentations computers. This chapter does not attempt to cover all of the standard

practices and codes of installation. Rather, it emphasizes specific points of consideration and

provides some general rules for qualified personnel. You must always observe special safety

precautions.

2.1 General Considerations

This section includes important information.

To help obtain optimal performance, the detector should be aimed toward the center of the

hazard or area to be monitored and protected ("detection zone") and have, to the extent that is

required, an unobstructed view of the protected area. Whenever possible, the detector face

should be tilted (aimed) down at an angle to prevent the accumulation of dust and dirt.

Do not start an installation until the detector task definition, system configuration, installation

location and coverage considerations have been considered and clearly defined by the relevant

designers.

To ensure optimal performance and an efficient installation that fits your needs and complies

with the requirements, the following guidelines should be addressed:

Sensitivity

To determine the sensitivity level, the following issues should be considered:

•The size of the fire to be detected at the determined distance.

•The type of flammable fuel.

Spacing and Location

Consider the following factors when determining the number of detectors and their

locations in the protected area:

•The size and shape of the protected area

•The nature of the hazards, including materials stored or used and the protected objects

•The sensitivity of the detectors

•If there are any obstructed lines of sight

•The field of view of the detectors

Environment

•Environmental conditions including but not limited to dust, snow or rain can reduce the

detectors’ sensitivity and require additional maintenance.

Welding

•Arc welding should not be performed within 13 ft. (4m) of the detector. It is recommended

that the system be inhibited during welding operations in situations where the possibility of

a false alarm cannot be tolerated.

FIK-UV-IR-HD User Manual Doc. No. 06-935.02

For more information & Technical support: (800)-979-FIKE (3453) 4

•Gas welding requires a system inhibit, since the gas torch is an actual fire.

•Arc welding rods can contain organic binder materials in the flux that burn during the

welding operation and are detectable by the device.

•Welding rods with clay binders do not burn and should not be detected. However, a system

inhibit is always recommended, since the material being welded may be contaminated with

organic substances (paint, oil, etc.) that will burn and may be of the size that should be

detected.

2.2 Preparations for Installation

The installation must comply with local regulations and standards applicable to flame detectors (e.g.,

NFPA 72) and all local and common engineering practices. It is recommended to consult with a safety

engineer.

The detectors can be installed with the use of general-purpose common tools and equipment.

Prior to installation:

•Verify the appropriate purchase order.

•Record the part and serial numbers of the detectors and the installation date and log.

•Visually inspect the detector prior to installation to make sure it is intact.

•Make sure that you have all the components and tools required to complete the

detector installation readily available before beginning installation. In cases where you

cannot complete the installation in a single session, secure and seal the detectors and

conduits before leaving the site.

•Use color-coded conductors or suitable wire markings or labels for the wiring. You may

use 12 to 20 AWG (2.5 2to 0.35 2) wires for the site wiring. The selection of wire

gauge should be based on the number of detectors used on the same line and the

distance from the control unit, in compliance with specifications.

•Use wire rated for a temperature of at least 111°C, which is 5°C above the rated service

temperature.

2.3 Required Tools

The detector can be installed using general purpose common tools as defined in the following table:

Tool

Function

Hex. KEY 6 mm

Vertical alignment

Hex. KEY 10 mm

Horizontal alignment

Wrench 13 mm

Mounting the detector

Flat Screwdriver 6 mm

Ground screw connection

Flat screwdriver 3.5mm

Terminal connection

2.4 Certification Instructions

Warning: Do not open the detector, even when isolated, when flammable atmosphere present.

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sensor de seguridad de Fike

Fike

Fike Sita Manual de usuario

Fike

Fike FIK-RA100 Manual técnico

Fike

Fike CEREX Manual de usuario

Fike

Fike 203-0003 Manual de usuario

Fike

Fike 204-0003 Twinflex Multipoint ASD Manual de usuario

Fike

Fike FIK-IR3-AS25 Manual de usuario

Fike

Fike Twinflex Multipoint 202-0003 Manual de usuario

Fike

Fike VESDA LaserCOMPACT VLC-500 Manual de usuario

Fike

Fike FIK-IR3-HD Manual de usuario

Fike

Fike FIK-W-PHOTO Manual de usuario

Fike

Fike RDU-A-200 Manual de usuario

Fike

Fike CIE-A-200 Manual de usuario

Fike

Fike FIK-W-PULL-DA Manual de usuario

Fike

Fike FIK-RA1000R Manual técnico

Fike

Fike FIK-IR3-H2-HD Manual de usuario

Fike

Fike OCELUS Series Manual de usuario

Fike

Fike FIK-2351 Manual de usuario

Fike

Fike FIK-FC351 Manual de usuario

Fike

Fike 323-0001 Manual de usuario

Fike

Fike FIK-IR3 Manual de usuario

Fike

Fike FIK-IR3-H2 Manual de usuario

Fike

Fike 60-1039 Manual de usuario

Manuales populares de Sensor de seguridad de otras marcas

THORLABS

THORLABS PDA10JT Manual de usuario

Waeco

Waeco UV-DETECT Manual de usuario

Intermatic

Intermatic IOS-DSIMF Manual de usuario

urmet domus

urmet domus 1083 Manual de usuario

Siemens

Siemens AZL66 Series Manual de usuario

BTI

BTI Profiline Multi Finder Manual de usuario

Challenger

Challenger SL01 Manual de usuario

DMP Electronics

DMP Electronics 1122INT Manual de usuario

Rielta

Rielta Ladoga MK-RK Manual de usuario

Mirion Technologies

Mirion Technologies ACCURAD PRD Manual de usuario

Bosch

Bosch DS835 Manual de usuario

DBI SALA

DBI SALA EZ Stop Manual del operador

Lamptime

Lamptime ST05C Manual de usuario

Ubiquiti

Ubiquiti MFI-MSC Manual de usuario

Subsite

Subsite 910R Instrucciones de instalación

Satel

Satel OPAL Pro Manual de usuario

Aleph

Aleph XC-1XTEU Manual de usuario

Pima

Pima LARIS QUAD Manual de usuario