Fike CyberCat 1016 Manual de usuario

Installation Manual

P/N 06-326, Rev. 14

September 2015

10-064, CyberCat 1016

10-066, CyberCat 254

Addressable Fire Alarm Control System

DEVELOPED BY Fike

704 SW 10th Street

P.O. Box 610

Blue Springs, Missouri 64013 U.S.A.

Phone: (800) 979-FIKE (3453)

(816) 229-3405

Fax: (816) 229-0314

Fike copyrights this manual and products it describes. You may not reproduce,

transmit, transcribe, or any part of this manual without express, written

permission from Fike.

This manual contains proprietary information intended for distribution to

authorized persons or companies for the sole purpose of conducting business

with Fike. If you distribute any information contained in this manual to

unauthorized persons, you have violated all distributor agreements and we may

take legal action.

TRADEMARKS Fikeis a registered trademark of Fike.

CyberCat®is a registered trademark of Fike.

QUALITY Fike has maintained ISO 9001 certification since 1996. Prior to shipment, we

thoroughly test our products and review our documentation to assure the highest

quality in all respects.

WARRANTY Fike provides a one-year limited manufacturer’s warranty on this product. All

warranty returns must be returned from an authorized Fike Distributor. Contact

Fike’s Marketing department for further warranty information.

Fike maintains a repair department that is available to repair and return existing

electronic components or exchange/purchase previously repaired inventory

component (advance replacement). All returns must be approved prior to return.

A Material Return Authorization (MRA) number must be indicated on the box of

the item being returned. Contact the appropriate Regional Sales Manager for

further information regarding product return procedures.

LIMITATIONS OF LIABILITY

Installation in accordance with this manual, applicable codes, and the

instructions of the Authority Having Jurisdiction is mandatory. Fike can not be

held liable for any incidental or consequential damages arising from the loss of

property or other damages or losses resulting from the use or misuse of Fike

products beyond the cost of repair or replacement of any defective components.

Fike reserves the right to make product improvements and change product

specifications at any time.

While every precaution has been taken during the preparation of this manual to

ensure the accuracy of its content, Fike assumes no responsibility for errors or

omissions.

TABLE OF CONTENTS

UL S2203 CyberCat 254/1016 Installation Manual i

FM P/N: 06-326 Rev 14, 09/2015

REVISION HISTORY

Document Title: CyberCat Addressable Fire Alarm System Installation Manual

Document Reorder Number: 06-326

Revision Section Date Reason for Change

0 All Sections 09/2004 Initial Release

1 All Sections 12/2004 Added CyberCat 254 and programming

menu’s

2 All Sections 05/2005

Added Networking, Isolator devices,

sounder bases

3 All Sections 08/2007 Upgraded Firmware to Version 3.0

4 Sections 2, 3, 6 and 8 03/2008 Added new peripherals

5 Sections 1, 3, 6 and 7 07/2008 Added Dual Monitor Module and

Conventional Zone Monitor Module

6 All Sections 10/2008

Creation of Product Manual and addition of

Smoke Control components

7 All Sections 04/2011 Separated manual into separate

Installation, Operation and Programming

Manuals

8 All Sections 06/2011 Changed document P/N from

06-326-1 to 06-326

9 Sections 1, 2, 3, Appendix A & C 12/2011 Added MNS updates

10 Sections 2.1.4, 3.7.6, 3.8,

Appendix A & C

04/2012 FAAST Detector Addition

11 Appendix A 06/2012 Updated battery calculations per UL 2572

12 All Sections 08/2014 Added FAAST XT

aspirating smoke detector

13 Appendix A 02/2015 Updated Appendix A battery calculation

14 All Sections 09/2015 Clarifications and General Updates

TABLE OF CONTENTS

ii CyberCat 254/1016 Installation Manual UL S2203

Rev 14, 09/2015 P/N: 06-326 FM

SECTION DESCRIPTION PAGE

1.0 Introduction ....................................................................................................................1-1

1.1 About This Manual...........................................................................................................1-1

1.2 Product Support...............................................................................................................1-1

1.3 Safety Information............................................................................................................1-1

1.4 Terms Used In This Manual.............................................................................................1-2

1.5 Related Documentation ...................................................................................................1-3

2.0 System Overview ...........................................................................................................2-1

2.1 System Description..........................................................................................................2-1

2.1.1 CyberCat Features...........................................................................................................2-2

2.1.2 Listings and Approvals.....................................................................................................2-3

2.1.3 Agency Standards and Compliance.................................................................................2-3

2.1.4 Minimum System Configurations.....................................................................................2-4

3.0 System Components .....................................................................................................3-1

3.1 Basic Equipment Packages .............................................................................................3-1

3.2 CyberCat Controller .........................................................................................................3-1

3.3 System Enclosures ..........................................................................................................3-8

3.3.1 Standard Enclosure..........................................................................................................3-9

3.3.1.1 Standard Enclosure with Solid Dead-front.....................................................................3-10

3.3.1.2 Standard Enclosure with Three Card Dead-front...........................................................3-10

3.3.2 Fire Command Center (FCC) Enclosures......................................................................3-11

3.3.2.1 FCC Enclosure with Nineteen Card Dead-front.............................................................3-11

3.3.2.2 FCC Enclosure with Twenty-Three Card Dead-front.....................................................3-12

3.3.2.3 FCC Enclosure with Option-2 Back-Box........................................................................3-13

3.3.3 FCC Enclosure with Twenty-Five Card Dead-front........................................................3-14

3.4 Optional Dead-Front Cover Plates.................................................................................3-15

3.5 Optional Circuit Modules................................................................................................3-16

3.5.1 DACT, 5 Zone with Serial Interface ...............................................................................3-16

3.5.1.1 DACT Programmer ........................................................................................................3-16

3.5.2 Supplemental Power Supply (SPS)...............................................................................3-16

3.5.3 Supplemental Loop Module (SLM) ................................................................................3-17

3.5.4 Relay Module (CRM4)....................................................................................................3-17

3.5.5 Reverse Polarity Module (RPM) ....................................................................................3-17

3.5.6 RS485 Network Module.................................................................................................3-17

3.5.7 Fiber Optic Network Module ..........................................................................................3-18

3.6 Peripheral Bus Devices..................................................................................................3-19

3.6.1 Fourteen Button Remote Display Unit ...........................................................................3-19

3.6.2 Ten Button Remote Display Unit....................................................................................3-19

3.6.3 Two Button Remote Display Unit...................................................................................3-20

3.6.4 Ethernet Module.............................................................................................................3-20

3.6.5 Multi-Interface Module (MIM).........................................................................................3-20

3.6.6 Intelligent Graphic Annunciator......................................................................................3-21

3.6.7 Firefighter’s Smoke Control Station (FSCS)..................................................................3-21

3.6.8 Twenty Zone Remote Annunciator ................................................................................3-22

3.6.9 Six Zone Smoke Control Switch Card............................................................................3-22

3.6.10 Input/Output Switch Card...............................................................................................3-22

3.6.11 Twenty Zone Annunciator Card (panel mount)..............................................................3-23

3.6.12 Audio Control Card.........................................................................................................3-23

3.6.13 Fire-Phone Card.............................................................................................................3-23

3.6.14 Supplemental Fire-Phone Card .....................................................................................3-24

TABLE OF CONTENTS

UL S2203 CyberCat 254/1016 Installation Manual iii

FM P/N: 06-326 Rev 14, 09/2015

SECTION DESCRIPTION PAGE

3.6.15 Amplifier Card................................................................................................................ 3-24

3.6.15.1 Class A Speaker Card................................................................................................... 3-24

3.6.16 Relay Control Assembly................................................................................................ 3-25

3.6.17 Relay Card..................................................................................................................... 3-25

3.6.18 Class A Peripheral Bus Card......................................................................................... 3-25

3.6.19 FCC Digital Paging Assembly....................................................................................... 3-26

3.6.20 Local Operating Console............................................................................................... 3-27

3.6.20.1 Audio Adjunct Panel...................................................................................................... 3-27

3.7 Intelligent Detectors....................................................................................................... 3-28

3.7.1 Photoelectric Smoke Detector....................................................................................... 3-28

3.7.2 Ionization Smoke Detector ............................................................................................ 3-28

3.7.3 Photo/Heat Combination Detector................................................................................. 3-29

3.7.4 Heat Detector ................................................................................................................ 3-29

3.7.5 Photoelectric Duct Detector........................................................................................... 3-30

3.7.5.1 Duct Detector Housing .................................................................................................. 3-30

3.7.6 FAAST Aspirating Smoke Detector............................................................................... 3-31

3.8 Detector Bases.............................................................................................................. 3-32

3.8.1 Four Inch Detector Base................................................................................................ 3-32

3.8.2 Six Inch Detector Base.................................................................................................. 3-32

3.8.3 Sounder Base................................................................................................................ 3-32

3.8.4 Relay Base .................................................................................................................... 3-32

3.9 Remote Testing and Notification Accessories............................................................... 3-33

3.9.1 Remote Annunciator...................................................................................................... 3-33

3.9.2 Remote Test Station...................................................................................................... 3-33

3.9.3 Remote Test Station with Key....................................................................................... 3-33

3.10 Addressable Modules.................................................................................................... 3-34

3.10.1 Mini Monitor Module ...................................................................................................... 3-34

3.10.2 Monitor Module.............................................................................................................. 3-34

3.10.3 Dual Monitor Module ..................................................................................................... 3-35

3.10.4 Addressable Pull Station ............................................................................................... 3-35

3.10.5 Conventional Zone Monitor Module .............................................................................. 3-35

3.10.6 Supervised Control Module........................................................................................... 3-36

3.10.6.1 Solenoid Protection Assembly....................................................................................... 3-36

3.10.6.2 Master-box Interface...................................................................................................... 3-36

3.10.7 Relay Module................................................................................................................. 3-37

3.11 Vesda High Level Interface ........................................................................................... 3-37

3.12 Programming and Configuration Equipment................................................................. 3-37

3.12.1 IR Remote Tool ............................................................................................................. 3-37

3.12.2 Hand Held Programmer................................................................................................. 3-38

3.12.3 C-Linx Software............................................................................................................. 3-38

3.12.4 Interface Cable .............................................................................................................. 3-38

3.12.5 Interface Converter........................................................................................................ 3-38

3.12.6 Interface Cable (USB to RS232) ................................................................................... 3-38

3.12.7 Interface Cable (USB) ................................................................................................... 3-38

3.13 Batteries and Battery Enclosures.................................................................................. 3-39

3.13.1 18 AH Battery Assembly................................................................................................ 3-39

3.13.2 Batteries......................................................................................................................... 3-39

3.13.3 Battery Enclosures ........................................................................................................ 3-39

3.13.3.1 33 AH Battery Enclosure............................................................................................... 3-39

3.13.3.2 75 AH Battery Enclosure............................................................................................... 3-39

TABLE OF CONTENTS

iv CyberCat 254/1016 Installation Manual UL S2203

Rev 14, 09/2015 P/N: 06-326 FM

SECTION DESCRIPTION PAGE

4.0 Installation ......................................................................................................................4-1

4.1 System Installation Sequence..........................................................................................4-1

4.2 Select the Enclosure Mounting Location..........................................................................4-1

4.3 Select the Enclosure Mounting Option.............................................................................4-2

4.4 Mount the Enclosure........................................................................................................4-2

4.4.1 Install the Dead-front Door...............................................................................................4-2

4.5 Wire Selection..................................................................................................................4-5

4.6 Circuit Class Designations...............................................................................................4-5

4.7 Pull Field Wiring Into the Enclosure.................................................................................4-5

4.8 Verify Field Wiring............................................................................................................4-6

4.9 Install the AC Power Transformer....................................................................................4-6

4.10 Connect AC Power to the Transformer............................................................................4-7

4.11 Install Optional Modules...................................................................................................4-9

4.12 Install the Controller.......................................................................................................4-10

4.13 Connect the AC Power to the Controller........................................................................4-13

4.14 Install Batteries...............................................................................................................4-14

4.14.1 Battery Cutoff .................................................................................................................4-14

4.15 Apply Power to the Panel...............................................................................................4-15

4.16 Connect Field Wiring......................................................................................................4-16

4.16.1 General Relay Wiring.....................................................................................................4-17

4.16.2 RS232 Wiring.................................................................................................................4-17

4.16.3 RS485 Peripheral Bus Wiring........................................................................................4-17

4.16.4 Auxiliary Power Wiring...................................................................................................4-18

4.16.5 SLC Wiring.....................................................................................................................4-19

4.16.5.1 Class B Wiring................................................................................................................4-19

4.16.5.2 Class A Wiring................................................................................................................4-20

4.16.5.3 Class X Wiring................................................................................................................4-20

4.16.5.4 Remote LED Wiring .......................................................................................................4-20

4.16.6 Notification Appliance Circuit Wiring..............................................................................4-21

4.17 Initial Power-Up with Field Wiring Connected................................................................4-22

4.18 Configure System...........................................................................................................4-22

4.19 Acceptance Test ............................................................................................................4-22

Appendix A Battery Calculation Form ............................................................................................. A-1

Appendix B System Operation Posting........................................................................................... B-1

Appendix C Compatible Components ............................................................................................. C-1

Appendix D Battery Cutoff................................................................................................................ D-1

TABLE OF CONTENTS

UL S2203 CyberCat 254/1016 Installation Manual v

FM P/N: 06-326 Rev 14, 09/2015

LIST OF EXHIBITS

EXHIBIT DESCRIPTION PAGE

1-1 Related Documentation................................................................................................... 1-3

1-2 Related Documentation – Continued .............................................................................. 1-4

2-1 Example CyberCat Block Diagram.................................................................................. 2-1

2-2 Minimum System Configurations..................................................................................... 2-4

3-1 System Ordering Formats ............................................................................................... 3-1

3-2 CyberCat System Controller with Display ....................................................................... 3-2

3-3 CyberCat Extended Display ............................................................................................ 3-2

3-4 CyberCat Controller Terminal Locations......................................................................... 3-3

3-5 CyberCat Controller Terminal Specifications .................................................................. 3-4

3-6 CyberCat Controller Terminal Specifications – Cont....................................................... 3-5

3-7 CyberCat Controller Terminal Specifications – Cont....................................................... 3-6

3-8 CyberCat Controller Terminal Specifications – Cont....................................................... 3-7

3-9 Enclosure Ordering Formats ........................................................................................... 3-8

3-10 Standard Enclosure with No Dead-front.......................................................................... 3-9

3-11 Standard Enclosure with Solid Dead-front .................................................................... 3-10

3-12 Standard Enclosure with Three Card Dead-front.......................................................... 3-10

3-13 FCC Enclosure with Nineteen Card Dead-front ............................................................ 3-11

3-14 FCC Enclosure with Twenty-Three Card Dead-front .................................................... 3-12

3-15 FCC Enclosure with Twenty-Five Card Dead-front....................................................... 3-14

3-16 Single Card Plate........................................................................................................... 3-15

3-17 Two Card Plate.............................................................................................................. 3-15

3-18 Three Card Plate........................................................................................................... 3-15

3-19 Four Card Plate ............................................................................................................. 3-15

3-20 Five Card Plate.............................................................................................................. 3-15

3-21 Fire-Phone Plate............................................................................................................ 3-15

3-22 DACT............................................................................................................................. 3-16

3-23 DACT Programmer........................................................................................................ 3-16

3-24 Supplemental Power Supply (SPS)............................................................................... 3-16

3-25 SLM ............................................................................................................................... 3-17

3-26 CRM4............................................................................................................................. 3-17

3-27 CRPM............................................................................................................................ 3-17

3-28 RS485 Network Module................................................................................................. 3-17

3-29 Fiber Optic Network Module.......................................................................................... 3-18

3-30 Fourteen Button Remote Display Unit........................................................................... 3-19

3-31 Ten Button Remote Display Unit................................................................................... 3-19

3-32 Tow Button Remote Display Unit .................................................................................. 3-20

3-33 Ethernet Module ............................................................................................................ 3-20

3-34 Multi-Interface Module................................................................................................... 3-20

3-35 Graphic Annunciator (Intelligent)................................................................................... 3-21

3-36 Firefighter’s Smoke Control Station (FSCS).................................................................. 3-21

3-37 Twenty Zone Remote Annunciator................................................................................ 3-22

3-38 Smoke Control Switch Card .......................................................................................... 3-22

3-39 I/O Switch Card ............................................................................................................. 3-22

3-40 Twenty Zone Annunciator Card..................................................................................... 3-23

3-41 Audio Control Card........................................................................................................ 3-23

3-42 Fire-Phone Card............................................................................................................ 3-23

3-43 Supplemental Fire-Phone Card..................................................................................... 3-24

3-44 Amplifier Card................................................................................................................ 3-24

3-45 Class A Speaker Card................................................................................................... 3-24

3-46 Relay Control Assembly................................................................................................ 3-25

TABLE OF CONTENTS

vi CyberCat 254/1016 Installation Manual UL S2203

Rev 14, 09/2015 P/N: 06-326 FM

EXHIBIT DESCRIPTION PAGE

3-47 HPM4 Relay Card..........................................................................................................3-25

3-48 Relay Card .....................................................................................................................3-25

3-49 Class A Peripheral Bus Card .........................................................................................3-25

3-50 FCC Digital Paging Card................................................................................................3-26

3-51 Local Operating Console ...............................................................................................3-27

3-52 LOC w/ RDU ..................................................................................................................3-27

3-53 Photo Detector...............................................................................................................3-28

3-54 Ion Detector....................................................................................................................3-28

3-55 Photo/Heat Detector.......................................................................................................3-29

3-56 Heat Detector.................................................................................................................3-29

3-57 Photo Duct Detector.......................................................................................................3-30

3-58 Duct Detector Housing...................................................................................................3-30

3-59 FAAST Detector.............................................................................................................3-31

3-60 4-Inch Base....................................................................................................................3-32

3-61 6-Inch Base....................................................................................................................3-32

3-62 Sounder Base ................................................................................................................3-32

3-63 Relay Base.....................................................................................................................3-32

3-64 Remote Annunciator ......................................................................................................3-33

3-65 Remote Test Station ......................................................................................................3-33

3-66 Remote Test Station with Key........................................................................................3-33

3-67 Mini Monitor Module.......................................................................................................3-34

3-68 Monitor Module ..............................................................................................................3-34

3-69 Dual Monitor Module......................................................................................................3-35

3-70 Pull Station.....................................................................................................................3-35

3-71 Conventional Zone Monitor Module...............................................................................3-35

3-72 Supervised Control Module............................................................................................3-36

3-73 Solenoid Protection Assembly.......................................................................................3-36

3-74 Master-box Interface......................................................................................................3-36

3-75 Relay Module .................................................................................................................3-37

3-76 VESDA HLI ....................................................................................................................3-37

3-77 IR Remote Tool..............................................................................................................3-37

3-78 Hand Held Programmer.................................................................................................3-38

3-79 DB9 – RJ11 Communication Cable...............................................................................3-38

3-80 USB – DB9 Communication Cable ................................................................................3-38

3-81 USB Communication Cable ...........................................................................................3-38

3-82 Sealed Batteries.............................................................................................................3-39

3-83 33 AH Battery Enclosure................................................................................................3-39

3-84 75 AH Battery Enclosure................................................................................................3-39

4-1 Standard Enclosure Dimensions......................................................................................4-3

4-2 FCC Enclosure Dimensions.............................................................................................4-4

4-3 Conductor Properties.......................................................................................................4-5

4-4 Standard Enclosure Transformer Mounting Locations ....................................................4-7

4-5 Fire Command Center Enclosure Transformer Mounting Locations ...............................4-7

4-6 Connect AC Power to Transformer..................................................................................4-8

4-7 Connect AC Power to Primary and Secondary Transformer...........................................4-8

4-8 Mounting Locations for Optional Modules .......................................................................4-9

4-9 Controller Mounting Location in Standard Enclosure ....................................................4-10

4-10 Controller Mounting Location in FCC Enclosure............................................................4-10

4-11 Mounting the Controller..................................................................................................4-11

4-12 Mounting the Extended Display.....................................................................................4-12

TABLE OF CONTENTS

UL S2203 CyberCat 254/1016 Installation Manual vii

FM P/N: 06-326 Rev 14, 09/2015

EXHIBIT DESCRIPTION PAGE

4-13 AC Power Connections ................................................................................................. 4-13

4-14 Battery Connections ...................................................................................................... 4-14

4-15 CyberCat Board Terminal Connections......................................................................... 4-16

4-16 P2 Relay Connections................................................................................................... 4-17

4-17 RS232 Wiring ................................................................................................................ 4-17

4-18 RS485 Peripheral Bus Wiring........................................................................................ 4-17

4-19 RS485 DACT Wiring...................................................................................................... 4-18

4-20 Auxiliary Power Wiring................................................................................................... 4-18

4-21 Class B SLC Wiring....................................................................................................... 4-19

4-22 Class A SLC Wiring....................................................................................................... 4-20

4-23 Detector Base Wiring..................................................................................................... 4-20

4-24 NAC Circuit Wiring – Class B........................................................................................ 4-21

4-25 NAC Circuit Wiring – Class A........................................................................................ 4-21

C-1 Compatible Components.................................................................................................C-1

D-1 Battery Cutoff Wiring Diagram.........................................................................................D-2

TABLE OF CONTENTS

viii CyberCat 254/1016 Installation Manual UL S2203

Rev 14, 09/2015 P/N: 06-326 FM

Reserved for future use.

Otros manuales para CyberCat 1016

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Sistema de control de Fike

Fike

Fike Epaco Manual de usuario

Fike

Fike 10-071 Manual de usuario

Fike

Fike 10-2539 Manual del propietario

Fike

Fike CyberCat 1016 Manual

Fike

Fike CyberCat 1016 Manual del propietario

Fike

Fike CyberCat 50 10-070 Manual

Fike

Fike Cheetah Xi Manual de usuario

Fike

Fike FIK-PULL-SA Manual de usuario

Fike

Fike Cheetah Xi Guía del usuario

Fike

Fike 55-042 Manual de usuario

Fike

Fike FIK-CZ-6 Manual de usuario

Manuales populares de Sistema de control de otras marcas

Pentair Pool Products

Pentair Pool Products Compool Manual de usuario

ComfortNET

ComfortNET CTK04 Manual de usuario

Fireye

Fireye InSight II 95DSS3 Manual de usuario

CAME

CAME G3000 Manual de usuario

Idemia

Idemia MorphoAccess VP MD Manual de usuario

Axis

Axis P1445-LE-3 Manual de usuario

HEIDENHAIN

HEIDENHAIN TNC 150 B Manual de usuario

CNC-Step

CNC-Step High-Z T-Series Manual de usuario

Doosan

Doosan DVF Series Manual de usuario

Honeywell

Honeywell KAP 140 Manual de usuario

Honeywell

Honeywell vk41 series Manual de usuario

AirBench

AirBench FPW Guía de instalación

Cypress

Cypress HHR-3160 Manual de usuario

CAME

CAME GLT40AOS Manual de usuario

Zonex

Zonex GEN II -VVT Guía del usuario

Altronics

Altronics K 9650 Manual de usuario

micro-trak

micro-trak RoadMaster Manual de usuario

micro-trak

micro-trak Calc-An-Acre II Manual de usuario