Fieldmann FZS 4003-B Manual de usuario

FZS 4003-B

ZS 4003-B

PERATI N MANUALGAS LINE BRUSH CUTTER

NTable of contents

Gasoline brush cutter

OPERATION MANUAL

Thank you for your purchase of our gasoline brush cutter. Before beginning to use

it, please, read this operation manual carefully and keep it for the case of a further

use.

TABLE OF CONTENTS

10.

11.

APPENDIX OF FIGURES ................................................................................................................. 3

GENERAL SAFETY INSTRUCTIONS ............................................................................................ 8

Important safety warnings

Packaging

Instructions for use

EXPLANATION FOR INSTRUCTION PLATES ON THE MACHINE ................................. 9

MACHINE DESCRIPTION AND DELIVERY CONTENT .................................................... 10

MACHINE ASSEMBLY .................................................................................................................. 11

PUTTING INTO OPERATION ...................................................................................................... 12

Before starting

Fuel ﬁlling

Gas lever and main switch (STOP)

Starting

Idle speed setup

INSTRUCTIONS FOR USE .............................................................................................................. 13

Safety instructions

Safety instructions - fuel

Safety instructions – cutting tools

MAINTENANCE AND STORAGE .............................................................................................. 14

Machine maintenance

Service

Storage

TECHNICAL DATA ........................................................................................................................... 16

WHAT TO DO “IF…” ....................................................................................................................... 16

DECLARATION OF CONFORMITY .......................................................................................... 18

DISPOSAL ........................................................................................................................................... 19

WARRANTY CERTIFICATE ......................................................................................................... 64

CONDITION OF GUARANTEE ................................................................................................ 65

ZS 4003-B

N General safety instructions

1. GENERAL SAFETY INSTRUCTIONS

Important safety warnings

Unpack the product carefully and be sure not to throw away any part of the package before

having found all components of the product.

Keep the product in a dry place out of reach of children.

Read all cautions and instructions. The failure to adhere to warning cautions and instructions

may result in an accident, ﬁre and/or a serious injury.

Packaging

The product is placed in a package preventing damage during transport. This package is a raw

material therefore it can be handed-over for recycling.

Instructions for use

Before beginning to work with the machine, read the following safety rules and instructions for

use. Familiarize with operating elements and the proper use of the device. Keep the manual in a

safe place for future reference. We recommend keeping the original package including the inner

packaging materials, cash voucher and guarantee card for a period of warranty at minimum.

For a case of transportation, pack the machine into the original box from the manufacturer,

thus ensuring a maximum protection of the product during a possible transport (e.g. moving or

sending into a service station).

Note: If you hand the machine over to next persons, hand it over together with the manual.

Adherence to the attached instructions for use is a precondition for the proper use of the

machine. The operation manual includes also instructions for operation, maintenance and

repairs.

The manufacturer does not take any responsibility for accidents or damages

resulting from the failure to adhere to this manual.

PERATI N MANUALGAS LINE BRUSH CUTTER

NExplanation for instruction plates on the machine

2. EXPLANATION FOR INSTRUCTION

PLATES ON THE MACHINE

Read the manual carefully before the

use

Use protective equipment when

working

General warning of danger!

Watch out, recoil!

Keep other persons (especially

children) and animals min. 15 m out of

the working area.

ZS 4003-B

0N Machine description and delivery content

3. MACHINE DESCRIPTION AND

DELIVERY CONTENT

Machine description (see Fig.1)

Use of the product

The brush cutter is only intended for cutting of grass, weed, bush or underbrush. It must not be

used for other purposes, e.g. trimming of lawns or hedges because an injury may occur in this

case.

Machine characteristic

Electronic ignition system

Automatic centrifugal clutch

Spiral transmission

Cardan shaft

WARNING! Sharp blades.

Delivery content

Take the machine carefully out of the package and check whether there are all following

components:

Garden brush cutter

Cord head with a cord of 2.5m length and 2.4mm diameter

Disc head

3-teeth blade

Tubular spanner

Operation manual

In the case of some parts missing or damaged, please, contact the dealer where you’ve bought

the machine.

Motor

Air cleaner

Suspension

Main switch + gas activator

Handle bar grip holder

Handle bar

Shaft

1 -

2 -

3 -

4 -

5 -

6 -

7 -

8 -

9 -

10 -

Housing

Gearbox body

Cutting tool

PERATI N MANUALGAS LINE BRUSH CUTTER

NMachine assembly

4. MACHINE ASSEMBLY

Drive shaft parts

Drive shaft assembly (see Fig.2)

Unscrew hexagonal screws (M6 x 10; Figs. 2, 1) .

Fasten the drive shaft to the engine housing with the help of 4 screws, tighten thoroughly.

Handle assembly (see Figs. 3, 4, 5)

Unscrew screws (2), put the handle bars to the grip holder (1), select the position according

to your working style (right-handed – the switch on the right side when viewing from the

engine). Pre-screw the upper parts of the grip holder (4 screws) (2), adjust the position of the

handle bars and tighten the screws (2) thoroughly.

Gearbox parts (see Figs. 6, 7)

Unscrew the locking bolt, mount the cutting tool respectively (see Fig. 6): Gearbox (1) –

Cutting head carrier (2) – Cutting blade (3) – Cover (4) – Fixing nut (5). Insert a screwdriver

to align the gearbox body groove with a hole of the cutting head carrier.Tighten the nut with

the aid of the tubular spanner (6) delivered within the packaging.

Note: Instead of the cutting blade, you can wind the head with the cord on the screw of the

carrier.

Mount the safety cover (3) on the shaft rod with the help of a clamp (2) and screws (1). Be

particular about the proper position (see Fig. 7

Cord replacement (see Figs. 13, 14, 15, 16)

Demount the cord head, take-out the coil with the cord and remove the rest of the cord.

Pull a new cord of the total length c. 2 m through both openings in the inner part of the cord

head (see Fig. 14) so that both ends are of the same length (see Fig. 13).

Wind both ends onto the coil in the direction of the WIND CORD marked arrow (see Fig. 15).

Place the coil with the cord into the head (see Fig. 16), pull both ends of the cord through the

opposite openings in the head and ﬁnish the assembly (close up).

ZS 4003-B

2N Putting into operation

5. PUTTING INTO OPERATION

Before starting

Adjust the shoulder strap length and handle position so that you feel comfortably when

working. Recheck tightening of all screws, bolts and nuts.

Fuel ﬁlling

Gasoline – use only unleaded motor gasoline with octane number 95 (NATURAL 95).

Oil – use only high-quality two-cycle engine oil intended for high speed engines.

Mix with gasoline in 1:25 ratio and pour into the tank.

Gas lever and main switch (STOP) (see Fig. 8)

The gas lever (1) with the electrical switch (2) are only partly mounted. Insert the gas cable

(47) into the carburetor drawbar groove and connect the electrical switch wires. The gas

lever is preassembled on the handle from the factory (3).

WARNING! When adjusting the gas lever, be sure not to let the cutting tool rotate while

starting. The cutting tool would start turning at high speed abruptly and could be dangerous.

The gas cable must be adjusted so that the engine is running at idle thrust when releasing the

gas lever (the cutting tool is not rotating).

Starting (see Fig. 9)

Press the gas lever to the ¼ of the gas lock and cage it.

Turn the main switch on.

Set the primer lever to the OFF (0) position.

Pull the starter quickly. If the engine started-up, move the primer lever into the ON (1) position

again. Repeat this procedure, until the engine starts-up and begins to run.

After having started-up, let the engine warm at idle speed 2,500-2,800 rpm for c. 2-3 min

before the load of the machine.

WARNING! The cutting blade may begin rotating just when starting. When starting the

engine, the blade must not be touching anything.

Idle speed setup (see Fig. 2)

If idle speed is too high or low, adjust the idle speed with the aid of the adjusting screw (3).

If the speed is too high, turn the adjusting screw counterclockwise.

If the speed is too low, turn the adjusting screw clockwise.

Otros manuales para FZS 4003-B

Tabla de contenidos

Otros manuales de Recortadora de Fieldmann

Fieldmann

Fieldmann FZN 4006 B Manual de usuario

Fieldmann

Fieldmann FZN 4101-A Manual de usuario

Fieldmann

Fieldmann FZN 4002 B Manual de usuario

Fieldmann

Fieldmann FZS 2001-E Manual de usuario

Fieldmann

Fieldmann FZN 2001-E Manual de usuario

Fieldmann

Fieldmann FZN 2002-E Manual de usuario

Fieldmann

Fieldmann FZN 4000 A Manual de usuario

Fieldmann

Fieldmann FZN 6005-E Manual de usuario

Fieldmann

Fieldmann FZS 2050-E Manual de usuario

Fieldmann

Fieldmann FZS 2505 E Manual de usuario

Fieldmann

Fieldmann FZS 70101-0 Manual de usuario

Fieldmann

Fieldmann FZS 70105-0 Manual de usuario

Fieldmann

Fieldmann FZS 2505 E Manual de usuario

Fieldmann

Fieldmann FZN 2000-E Manual de usuario

Fieldmann

Fieldmann FZS 1002-A Manual de usuario

Fieldmann

Fieldmann FZN 2001-E Manual de usuario

Fieldmann

Fieldmann FZS 1025-A Manual de usuario

Fieldmann

Fieldmann FZN 70205-0 Manual de usuario

Fieldmann

Fieldmann FZN 2505-E Manual de usuario

Fieldmann

Fieldmann FZS 2306-E Manual de usuario

Fieldmann

Fieldmann FZS 3002-B Manual de usuario

Fieldmann

Fieldmann FZS 1001-A Manual de usuario

Fieldmann

Fieldmann FZS 4003-B Manual de usuario

Fieldmann

Fieldmann FZS 2105 E Manual de usuario

Manuales populares de Recortadora de otras marcas

MTD

MTD HT 51 E Manual de usuario

McCulloch

McCulloch T22 LS Manual de usuario

COCKRAFT

COCKRAFT PRO HL36-S Manual de usuario

Grizzly

Grizzly CT 1800 Li Manual de usuario

Peco

Peco Z Trimmer ZT-3000 Manual de usuario

Solo

Solo 116 Manual de usuario

Stiga

Stiga ST 1200 Manual de usuario

Echo

Echo GT-225 - 10-09 Manual de usuario

RedMax

RedMax BT17 Manual de usuario

GreenWorks

GreenWorks STA806 Manual de usuario

Parkside

Parkside PHSL 900 A3 Manual de usuario

Gardeo

Gardeo PRO GPTHT2560 Manual de usuario

Park

Park DT-810870 Manual de usuario

Worx

Worx WG209 Manual de usuario

Gardenline

Gardenline 43671/HTKS26 Manual de usuario

Makita

Makita 3710 Manual de usuario

Champion

Champion 100683 Manual de usuario

Stihl

Stihl FS 311 Manual de usuario