The handling with fuels requires circumspective and ca-
reful handling. Imperatively observe the security advices.
- Refuel only if the engine is switched off!
- Take off the body.
- Thoroughly clean the area around the fuels nipple.
- Remove the fuel filler cap and carefully fill in the fuel mixture.
- Smoking or any kind of open fire is not admitted.
- Fuels might contain solvent-like substances. Avoid contact with skin and
eyes. Wear gloves for refueling. Do not inhale fuel vapors.
- Do not spill any fuel. If you have spilled fuel immediately clean the engi-
ne and the model.
- Make sure that no fuel will get into the soils (environmental protection).
Use an appropriate mat.
- Do not refuel in enclosed rooms. Fuel vapors accumulate at the soil (risk
of explosion).
- Transport and store fuels only in admitted and labeled canisters. Keep
fuel out of the range of children.
- The operator is responsible for any damages caused to third persons in
the operating range of the model, respectively of the engine, if they are
injured or in case of property damage.
- The model must only be passed on to persons who are familiar with this
model and its operation, always provide the operating manual.
- Persons with implanted heart pacemakers must not work on running en-
gines and on live parts of the ignition system when the engine is being
started.
- The engine must neither be started nor operated in enclosed rooms (wi-
thout sufficient ventilation).
- When starting the engine, avoid inhaling the exhausts.
- The model must neither be started nor operated without air filter or wi-
thout exhaust system.
- Before every start perform a functional check of the safety-relevant parts.
- The throttle rods must always return automatically to the idle position.
- Any cleaning, maintenance and repair works must only be performed
with the engine being switched off. The engine and silencers are getting
very hot. In particular do not touch the silencer.
Comments regarding the construction manual:
Before starting the assembly please see through this construction manu-
al. This way you will get an overview of the whole execution.
Please check by means of the parts or bag list if the construction kit is com-
plete and also check the weight of the individual bags for the positions.
Only this way you may be sure that all parts which you need for the as-
sembly are available. If a part is missing, please immediately contact your
specialized dealer.
Table of contents
Position 1-3: Front and rear differential gear
Position 4-8: Belt drive, belt tensioner
Position 9: CFRP chassis stiffening, ABS splash guards
Position 10-13: Rear axle
Position 14: Shock absorbers
Position 15: Shock mount, spoiler mount, rear damper protection
Position 16-21: Engine, air filter, gear, fuel tank
Position 22-25: Starter rope ,roll bar, tuning pipe
Position 26-32: Servos, receiver box, servo saver
Position 33-35: Wishbones, stabilizer, front uprights
Position 36-37: Front axle plate, front bumper
Position 38-39: Throttle rods
Position 40-45: Hydraulic brake system
Warranty conditions for engines:
FG Modellsport assumes no liability for defects if the engine has been modified by installation of parts of foreign
origin or if engine parts for tuning purposes were worked on or were modified and the damage stands in causal
interrelationship with the modification. Further the liability for defects of power-increased engines is excluded. In
this case also the compensation liability is excluded.
