Festool HL 850 EB Manual de usuario

1/3

116/01

Description

The Festool electric planer HL 850 EB not only carries out standard planing

tasks, such as smooth planing of surfaces or edge trimming, but can do a

lot more.

The superior technical feature of this planer is the planer head mounted on

one side. This enables users to gouge out rebates to practically any depth.

The example provided here describes how the HL 850 is used to create a

rebate.

A

No. 116

Rebating with HL 850 EB

2/3

116/03

B

Tools/accessories

You require the HL 850 EB for rebating. All accessories are included in the

scope of delivery.

Basic equipment:

Denomination Order no.

Electric planer HL 850 EB GB 240V 574541

The use of a dust extractor is highly recommended. The extractor connector

can be fitted on the left or right of the device as required. The connection

diameter is 36 mm.

116/04

116/02

C

Preparation/set-up

Install the rebate depth and parallel stop. (see operating instructions)•

Setting the parallel stop to the desired rebate width.•

Set the desired rebate depth. To do this, measure the exact distance•

from the planer foot to the rebate depth stop. Place the machine on its

side such that the rebate depth stop faces upwards.

116/05

Chamfering using „V“ grove in forward soleplate.

3/3

Our application examples are recommendations which have been tried and tested in

practice. However the different conditions are completely outside of our control. We

therefore do not provide any form of guarantee. Any legal claims arising out of this are

not to be made against Festool. Make sure you follow the safety directions and product

instructions provided with the product.

www.festool.co.uk

116/06

116/07

116/08

E

Procedure

Set the cut depth to 1 mm.•

During the first work step, guide the planer so that the parallel stop is•

exactly adjacent to the workpiece. The first work step is decisive for the

fitting accuracy of the rebate!

From the second work step, the edge of the planer foot is placed against

the rebate edge. The parallel stop is therefore only necessary at the start of

planing and can then be removed.

Ensure that the edge of the planer foot is always guided exactly along the•

rebate edge.

When the rebate depth stop is against the workpiece, the set rebate depth

has been reached.

Finished rebate.

If the rebate depth stop is not used, rebates with endless depths can be

planed.

116/09

Otros manuales para HL 850 EB

4

Tabla de contenidos

Otros manuales de Herramientas de Festool

Festool

Festool OFK 700 EQ Manual de usuario

Festool

Festool MFT/3-VL Instrucciones de instalación

Festool

Festool OF 1400 EBQ Manual de usuario

Festool

Festool TP 220 Instrucciones de instalación

Festool

Festool CMS-OF Manual de usuario

Festool

Festool VAC SYS SE Manual de usuario

Festool

Festool Basis WRA 500 Manual de usuario

Festool

Festool MFK 700 EQ Instrucciones de instalación

Festool

Festool CS 70 KA-ST Manual de usuario

Festool

Festool TP 220 Instrucciones de instalación

Festool

Festool KA 65 Manual de usuario

Festool

Festool ST Manual de usuario

Festool

Festool VB-CMS/CS 50 Manual de usuario

Festool

Festool SE-EHL Guía de inicio rápido

Festool

Festool LA Manual de usuario

Festool

Festool MX 1000 E EF Instrucciones de instalación

Festool

Festool ROTEX RO 90 DX FEQ Manual de usuario

Festool

Festool APS 900 Manual de usuario

Festool

Festool OSC 18 Manual de usuario

Festool

Festool Conturo MFT/3 Manual de usuario

Festool

Festool MX 1200 E EF Manual de usuario

Festool

Festool MFT 800 Manual de usuario

Festool

Festool SE-HL Instrucciones de instalación

Festool

Festool LA-CS 50/CMS Manual de usuario

Manuales populares de Herramientas de otras marcas

Martor

Martor SECUNORM 175 Manual de usuario

ERKCO

ERKCO 1000 Manual de usuario

jbc

jbc N4473 Manual de usuario

FEINMETALL

FEINMETALL FZWZ-SET-001 Manual de usuario

Worx Professional

Worx Professional Sonicrafter WU676 Manual de usuario

Gage Bilt

Gage Bilt GB713SH Manual de usuario

Hilti

Hilti DX 9-ENP Manual de usuario

norbar

norbar NORTRONIC 34399 Manual de usuario

BGS technic

BGS technic 8578 Manual de usuario

Makita

Makita DHR241 Manual de usuario

Motor Guard

Motor Guard JMB-1250 Manual de usuario

Power Adhesives

Power Adhesives 805-12 Manual de usuario

Clemco

Clemco 24189 Manual de usuario

VVG

VVG VNG 903 Series Manual de usuario

Hilti

Hilti FX 3-A Manual de usuario

Grizzly

Grizzly H6472 Manual de usuario

axing

axing BWZ 5-02 Manual de usuario

Dh-Robotics

Dh-Robotics RGI-100 Cómo utilizar