FERREX FBGS240E1 Manual de usuario

User Manual

BENCH GRINDER

Contents

Dok./Rev.-Nr. 705990_20220210

AFTER SALES SUPPORT 705990

1300 855 831

[email protected]

MODEL:

FBGS240E1

YEAR

WARRANTY

Made in China

FERREX®is a registered trademark of ALDI Stores

DISTRIBUTED BY:

ALDI STORES

1 SARGENTS ROAD

MINCHINBURY NSW 2770

www.aldi.com.au

ALDI guarantees that our exclusive brand products are developed to our

stringent quality specifications. If you are not entirely satisfied with this

product, please return it to the nearest ALDI store within 60 days from the

date of purchase, for a full refund or replacement, or take advantage of our

after sales support by calling the supplier’s Customer Service Hotline.

08/2022

2 3

Overview ..................................................................................... 3

Package contents/part list .........................................................6

Explanation of Symbols .............................................................. 7

Introduction ................................................................................8

Layout ..........................................................................................9

Scope of delivery.........................................................................9

Intended use ..............................................................................10

Safety regulations...................................................................... 11

Assembly ....................................................................................15

Operation....................................................................................16

Working instructions..................................................................17

Cleaning and maintenance........................................................19

Technical data ........................................................................... 20

Storage and transport ...............................................................21

Disposal and recycling ...............................................................21

Troubleshooting........................................................................ 22

Warranty Details........................................................................ 24

Repair and Refurbished Goods or Parts Notice ....................... 26

6 7

111217 19

10a

10b

63a 3b 3

Package contents/part list

1Bench Grinder, 1x

2Spark protection, 1x

3Adjusting screw for spark protection, 1x

4Workpiece support, 2x

5Sanding belt, 3x

6Warranty card

7Instruction manual

Kapitelüberschrift

Explanation of Symbols

The use of symbols in this manual is intended to draw your attention to possible risks.

The safety symbols and the explanations that accompany them must be perfectly un-

derstood. The warnings in themselves do not remove the risks and cannot replace

correct actions for preventing accidents.

Warning: Read the operating instructions to reduce the risk of

injury

Wear ear-muffs. The impact of noise can cause damage to

hearing.

Wear a breathing mask. Dust which is injurious to health can be

generated when working on wood and other materials. Never

use the device to work on any materials containing asbestos!

Wear safety goggles. Sparks generated during working or splin-

ters, chipsand dust emittedbythe device cancause loss of sight.

Wear protective gloves.

Never use faulty grinding disks.

Caution! Risk of electric shock!

Made in China

Complies with the Australian norms and standards.

Warranty period.

Warranty class.

Explanation of symbols

Kapitelüberschrift

Introduction

Congratulations on choosing to buy a FERREX®product.

All products brought to you by FERREX®are manufactured to the highest standards

of performance and safety, and as part of our philosophy of customer service and

satisfaction, are backed by our comprehensive 3 Years Warranty.

We hope you will enjoy using your purchase for many years to come.

Note:

According to the applicable product liability law the manufacturer of this device is

not liable for damages which arise on or in connection with this device in case of:

• improper handling,

• non-compliance with the instructions for use,

• repairs by third party, non-authorised skilled workers,

• installation and replacement of non-original spare parts,

• improper use.

Recommendations:

Read the entire text of the operating instructions prior to the assembly and operation

of the device.

These operating instructions are intended to make it easier for you to get familiar

with your device and utilise its intended possibilities of use.

The operating instructions contain important notes on how to work safely, properly

and economically with your machine and how to avoid dangers, save repair costs,

reduce downtime, and increase the reliability and working life of the machine.

In addition to the safety regulations contained herein, you must in any case comply

with the applicable regulations of your country with respect to the operation of the

machine.

Keep the operating instructions in a clear plastic folder to protect them from dirt and

humidity; store them near the machine. The instructions should be read and careful-

ly understood by each operator prior to using the machine. Only persons who have

been trained in the use of the machine and are aware of the related dangers and

risks should be allowed to use the machine. The local required minimum age must

be met.

In addition to the safety notes contained in these operating instructions and any

speciﬁc regulations in your country, the generally recognised technical rules for the

operation of identically constructed machines must be observed.

Introduction

Kapitelüberschrift

Layout (Fig. 1)

1. Spark protection

2. Adjusting screw for spark protection

3. Grinding disc

4. Workpiece support grinding disc

5. Star grip nut to mount/adjust the workpiece support grinding disc

6. Grinding disc cover

7. Protective hood grinding disc

8. On/Off switch

9. Engine housing

10. Upper (a) and lower (b) roller

11. Fixing screws for grinding disc cover

12. Grinding disc cover

13. Workpiece support grinding belt

14. Star grip nut to install the workpiece support grinding belt

15. Bore holes for table mounting

16. Protective hood grinding belt

17. Adjusting screw for belt run

18. Clamping lever grinding belt

19. Grinding belt

20. Working light

21. Fixing screws for grinding disc cover

Scope of delivery

Bench Grinder 1x

Spark protection 1x

Adjusting screw for spark protection 1x

Workpiece support 2x

Sanding belt (1x grit 80 pre-mounted, 1x grit 80, 1x grit 120) 3x

Warranty card 1x

Instruction manual 1x

Layout/Scope of delivery

Kapitelüberschrift

• Open the packaging and take out the equipment with care.

• Remove the packaging material.

• Check that all listed contents are present.

• Inspect the equipment and parts for any damage. Please contact the helpline if

anything is missing.

• If possible, keep the packaging until the end of the guarantee period.

• Read the operating instructions fully to familiarise yourself with the tool prior to

using it.

• Only use original accessories and spare parts. Spare parts are available by

contacting the helpline.

• Specify the part numbers when you contact the helpline.

m ATTENTION!

The device and packaging materials are not toys!

Children must not be allowed to play with plastic bags, ﬁlm and small parts!

There is a risk of swallowing and suffocation!

Intended use

The bench grinder with belt sander is a stationary grinding device for the coarse and

ﬁne grinding of metal, wood and plastic. It is suitable for deburring, rust removal and

grinding.

The device is not intended for all other types of applications (e.g. grinding with un-

suitable grinding tools,grindingwith a coolant solution,grindinghazardous mate-ri-

als such as asbestos).

The equipment is allowed to be used only for its prescribed purpose. Any other use is

deemed to be a case of misuse. The user/operator and not the manufacturer will be

liable for any damage or injuries of any kind resulting from such misuse.

An element of the intended use is also the observance of the safety instructions, as well

as the assembly instructions and operating information in the operating manual.

Persons who operate and maintain the product must be familiar with the manual

and must be informed about potential dangers.

Inaddition, the applicable accident preventionregulations must be strictlyobserved.

Other general occupational health and safety-related rules and regulations must be

observed.

The liability of the manufacturer and resulting damages are excluded in the event of

modiﬁcations of the machine.

Scope of delivery/Intended use

Kapitelüberschrift

The machine may only be operated with original parts and original accessories from

the manufacturer.

The safety, operating and maintenance speciﬁcations of the manufacturer, as well as

the dimensions speciﬁed in the operating manual, must be observed.

This equipment is intended for domestic DIY use only. We assume no guarantee if

the product is used in commercial or industrial applications, or for equivalent work.

Safety regulations

General power tool safety warnings

mWARNING Read all safety warnings, instructions, illustrations

and speciﬁcations provided with this power tool. Failure to follow all

instructions listed below may result in electric shock, ﬁre and/or serious

injury.

Save all warnings and instructions for future reference.

The term “power tool” in the warnings refers to your mains-operated

(corded) power tool or battery-operated (cordless) power tool.

1) Work area safety

a) Keep work area clean and well lit. Cluttered or dark areas invite

accidents.

b) Do not operate power tools in explosive atmospheres, such as

in the presence of ﬂammable liquids, gases or dust. Power tools

create sparks which may ignite the dust or fumes.

c) Keep children and bystanders away while operating a power

tool. Distractions can cause you to lose control.

2) Electrical safety

a) Power tool plugs must match the outlet. Never modify the plug

in any way. Do not use any adapter plugs with earthed (ground-

ed) power tools. Unmodiﬁedplugs and matching outlets willreduce

risk of electric shock.

Intended use/Safety regulations

Kapitelüberschrift

b) Avoid body contact with earthed or grounded surfaces, such as

pipes, radiators, ranges and refrigerators. There is an increased

risk of electric shock if your body is earthed or grounded.

c) Do not expose power tools to rain or wet conditions. Water enter-

ing a power tool will increase the risk of electric shock.

d) Do not abuse the cord. Never use the cord for carrying, pulling or

unplugging the power tool. Keep cord away from heat, oil, sharp

edges or moving parts. Damaged or entangled cords increase the

risk of electric shock.

e) When operating a power tool outdoors, use an extension cord

suitable for outdoor use. Use of a cord suitable for outdoor use re-

duces the risk of electric shock.

f) If operating a power tool in a damp location is unavoidable, use

a residual current device (RCD) protected supply. Use of an RCD

reduces the risk of electric shock.

3) Personal safety

a) Stay alert, watch what you are doing and use common sense

when operating a power tool. Do not use a power tool while you

are tired or under the inﬂuence of drugs, alcohol or medication.

A moment of inattention while operating power tools may result in

serious personal injury.

b) Use personal protective equipment. Always wear eye protection.

Protective equipment such as a dust mask, non-skid safety shoes,

hard hat or hearing protection used for appropriate conditions will

reduce personal injuries.

c) Prevent unintentionalstarting. Ensurethe switchis inthe off-po-

sition before connecting to power source and/or battery pack,

picking up or carrying the tool. Carrying power tools with your ﬁn-

ger on the switch or energising power tools that have the switch on

invites accidents.

d) Remove any adjusting key or wrench before turning the power

tool on. A wrench or a key left attached to a rotating part of the pow-

er tool may result in personal injury.

Safety regulations

Kapitelüberschrift

e) Do not overreach. Keep proper footing and balance at all times.

This enables better control of the power tool in unexpected situations.

f) Dress properly. Do not wear loose clothing or jewellery. Keep

your hair and clothing away from moving parts. Loose clothes,

jewellery or long hair can be caught in moving parts.

g) If devices are provided for the connection of dust extraction and

collection facilities, ensure these are connected and properly

used. Use of dust collection can reduce dust-related hazards.

h) Do not let familiarity gained from frequent use of tools allow you

to become complacent and ignore tool safety principles. A care-

less action can cause severe injury within a fraction of a second.

4) Power tool use and care

a) Do not force the power tool. Use the correct power tool for your

application. The correct power tool will do the job better and safer at

the rate for which it was designed.

b) Do not use the power tool if the switch does not turn it on and

off. Any power tool that cannot be controlled with the switch is dan-

gerous and must be repaired.

c) Disconnect the plug from the power source and/or remove the

battery pack, if detachable, from the power tool before making

any adjustments, changing accessories, or storing power tools.

Such preventive safety measures reduce the risk of starting the pow-

er tool accidentally.

d) Store idle power tools out of the reach of children and do not al-

low persons unfamiliar with the power tool or these instructions

to operate the power tool. Power tools are dangerous in the hands

of untrained users.

e) Maintain power tools and accessories. Check for misalignment or

binding of moving parts, breakage of parts and any other condi-

tion that may affect the power tool’s operation. If damaged, have

the power tool repaired before use. Many accidents are caused by

poorly maintained power tools.

f) Keep cutting tools sharp and clean. Properly maintained cutting

tools with sharp cutting edges are less likely to bind and are eas-

ier to control.

Safety regulations

Kapitelüberschrift

g) Use the power tool, accessories and tool bits etc. in accordance with

these instructions, taking into account the working conditions and

the work to be performed. Use of the power tool for operations differ-

ent from those intended could result in a hazardous situation.

h) Keep handles and grasping surfaces dry, clean and free from oil

and grease. Slippery handles and grasping surfaces do not allow for

safe handling and control of the tool in unexpected situations.

5) Service

a) Have your power tool serviced by a qualiﬁed repair person using

only identical replacement parts. This will ensure that the safety of

the power tool is maintained.

Safety instructions for grinding machines

a) Do not use damaged accessories. Check the accessories, e.g. the grind-

ing disc for cracks before each use. After inspection and installation of

an accessory, remove yourself and bystanders from the machine and

allow the electric tool to run at maximum idle speed for one minute.

Damaged accessories normally break during this test period.

b) The nominal speed of the accessories must be at least equal to the

maximum speed indicated on the electric tool. Accessories that run fast-

er than the nominal speed may break.

c) Never grind on the sides of a grinding disc. Lateral grinding can cause

the grindstone to break.

Residual Risks

mThe machine has been built according to the state of the art and the rec-

ognised technical safety requirements. However, individual residual risks can

arise during operation.

• Risk of injury for ﬁngers and hands due to the rotating grinding tool.

• Hazard due to electrical power, with the use of improper electrical connec-

tion cables.

• Furthermore, despite all precautions having been met, some non-obvious

residual risks may still remain.

• Residual risks can be minimised if the “safety instructions” and the “intend-

ed use” are observed along with operating manual in its entirety.

Safety regulations

Tabla de contenidos

Manuales populares de Amoladora de otras marcas

Parkside

Parkside PWS 230 C3 Manual de usuario

SUHNER ABRASIVE

SUHNER ABRASIVE ASC 9 Manual técnico

PTA

PTA P1322 Manual de usuario

Crown

Crown CT13313 Manual de usuario

Parkside

Parkside 280250 Manual de usuario

Climax

Climax VM2150 Series Manual de usuario

Jet

Jet JPSG-618M1 Manual de servicio

Makita

Makita GA4030 Manual de usuario

DeWalt

DeWalt DWEN202 Manual de usuario

Grizzly

Grizzly G2790 Manual de usuario

Fein

Fein MSf843-1a Manual de usuario

Bosch

Bosch GWS 14,4 V PROFESSIONAL Manual de usuario

RAMSET

RAMSET CBAGR18 Manual de usuario

Bosch

Bosch 8-115 Z Manual de usuario

STEELE PRODUCTS

STEELE PRODUCTS SP-PB008 Manual de usuario

MW TOOLS

MW TOOLS ME15W Manual de usuario

Caravaggi

Caravaggi SP 20 Instrucciones de funcionamiento

SUHNER ABRASIVE

SUHNER ABRASIVE UWK 10-R125 Manual técnico