FERRANTI LABRADOR Manual de usuario

ASSEMBLY MANUAL

DOG KENNEL - LABRADOR MODEL Rel. 08-2022 - Rev. 0

EN - Translation from the original language (Italian)

Ferranti s.r.l. Unipersonale

Via Vicinato n. 43 - Frazione Fratta - 06036 Montefalco (PG) - Italy

Tel. (+39) 0742 399096 [email protected] - www.ferrantinet.com

ASSEMBLY MANUAL

DOG KENNEL

LABRADOR Model

INTRODUCTION

This assembly manual reects the technique at the time of pur-

chase and the specications in force at the current date of edi-

tion; it contains the information necessary for correct installation,

cleaning and disposal of the product at the end of its life.

FERRANTI S.R.L. reserves the right to make modications,

changes or improvements to the manual or to the product at any

time and without notice.

Use only the original mounting components provided.

ATTENTION

The manufacturer is not liable for damage to

property, persons and animals caused by ac-

cidents due to failure to comply with the in-

structions in this assembly manual.

The images are purely indicative and do not constitute a

commitment for the manufacturer and/or the Distributor.

Any proposal by the Customer regarding improvements to be

made to the product will be welcomed by FERRANTI S.R.L.,

which will evaluate their implementation.

INTENDED USE (PERMITTED USE).

The product in question has been designed for the housing and

keeping of animals.

The inner dog house is suitable for 20-45 kg, 50-70 cm large

dog breeds (such as: German Shepherd, Dalmatian, Female

Dobermann, English Setter) and for 18-40 kg, 50-63 cm medi-

um-sized dog breeds (such as: Golden retriever, Boxer, Collie,

Labrador, Border Collie).

IMPROPER USE (NOT PERMITTED).

Any use other than the permitted one is to be considered “im-

proper use”; the Manufacturer therefore declines all responsibil-

ity for any damage caused to property, animals and/or persons.

GENERAL DESCRIPTION

The dog kennel, mod. Labrador consists of:

- Hot-dip galvanized steel structure, bu󰀨ered with panels in marine

plywood treated with impregnating agent, 1.5 cm thick.

- Inner wooden dog house (from 120x65x82(*)x59(**), with “anti-bite”

entrance from 30x50), that can be inspected by lifting the roof and

complete with bench raised from the ground, removable and wash-

able.

(*) Front Height/ (**) Rear Height

- Front panel of hot galvanized steel, bars diameter of 1.2 cm and

distance of 6.5 (in mesh on request); complete with gates with lock

holder.

- Insulated panel cover, 3.5 cm thick, framed with sheet metal proles.

- Protrusion cover 11 cm on the sides and on the back, while about

3.5 cm on the front.

- By installing the boxes in series, that is, one attached to the other,

there is a saving compared to the standard model for which we rec-

ommend you request a quote by email specifying the structure that

you intend to design.

- On request, with a front fence that can be extended at will with gal-

vanised mesh or bar panels.

Dear Customer,

Thank you for purchasing a FERRANTI product.

OBLIGATION

Please consult this assembly manual carefully

before proceeding with any operation on the

product.

ASSEMBLY MANUAL

DOG KENNEL - LABRADOR MODEL Rel. 08-2022 - Rev. 0

EN - Translation from the original language (Italian)

Ferranti s.r.l. Unipersonale

Via Vicinato n. 43 - Frazione Fratta - 06036 Montefalco (PG) - Italy

Tel. (+39) 0742 399096 [email protected] - www.ferrantinet.com

OVERALL DIMENSIONS

125 x 240 200 x 240

External (WxDxH)

125 x 240 x 175 cm 206 x 240 x 175 cm

Interior (WxDxH) 120 x 235 x 170 cm 201 x 235 x 170 cm

W = Width / D = Depth / H = Height

UNPACKING

► Place the structure near the nal installation site and on a

stable and horizontal area of the ground.

► Remove the packaging materials taking care not to damage

the components.

ATTENTION

DANGER! Keep out of the reach of chil-

dren and animals.

Packaging materials (plastic bags, straps, etc.)

can be a source of danger to health (e.g. su󰀨o-

cation).

► Divide the packaging materials according to their type and

dispose of them in accordance with the provisions in force

regarding the disposal of waste.

RECYCLING

All the packaging materials are recyclable and

must be disposed of in accordance with the lo-

cal legislation.

STANDARD EQUIPMENT

124

1No. 10 screws M8x30

2No. 6 screws M8x50

3No. 2 hooks M6x150

No. 2 shaped hooks

M6x150

5No. 4 self-tapping

screws 4.8x16

6No. 16 M8 nuts

7No. 4 M6 nuts

8N. 4+4 rhomboidal

washers

9N. 2 at washers

EXTENSION OF THE FENCE (optional)

10 12 13

10 No. 4 “U” brackets

11 Screws M8x40

12 No. 6 screws M8x60

13 Nuts M8

INSTALLATION

2x The assembly operations must be performed

by at least two persons.

For the assembly of the products, the use of

Personal Protective Equipment is always re-

commended: work gloves to protect the hands

from the danger of being cut.

RECOMMENDED TOOLS

Slotted Screwdriver - Cross Head Screwdriver - Wrench - Cutter.

Note: Tighten the screws completely only at the end and after

checking the square of the structure.

1) Assembling the sides (A1 and A2)

► Remove the screws (1) and nuts (6) from the kit supplied.

● Connect the side wall (A1) to the rear wall (B) and the front

wall (C) using the screws and nuts.

● Proceed in the same way for the side (A2).

A1 C

2) Assembling the mesh panels (D1 and D2)

● Recess the mesh panel (D1) in the side (A1).

● Do the same for the mesh panel (D2).

2D1

ASSEMBLY MANUAL

DOG KENNEL - LABRADOR MODEL Rel. 08-2022 - Rev. 0

EN - Translation from the original language (Italian)

Ferranti s.r.l. Unipersonale

Via Vicinato n. 43 - Frazione Fratta - 06036 Montefalco (PG) - Italy

Tel. (+39) 0742 399096 [email protected] - www.ferrantinet.com

3) Extension of the fence (optional)

In the event that the extension of the fence occurs after the in-

stallation of the box, remove gate E1 (see point 4).

► Take the “U” brackets (10), the screws (11), the screws

(12), and the nuts (13) from the kit supplied.

● Position the “U” brackets (10) together with the screw (11)

at the upper hole of the mesh wall (D1) and the lower hole of

the side wall (A1) (Fig. 3).

10 12 13

● Tighten the screws (12) enough to hold the brackets to the

structure.

● Do the same for the mesh part (D2) and the side wall (A2).

10+11

10+11 14

12 A2

● Recess the frame (E1) inside the edges of the side walls

(Fig. 4) making the holes prepared coincide with those of the

brackets.

● Screw the screws (12) and the nuts (13) so as to x the

frame to the brackets.

● In the same way, proceed in the central holes (F).

● Assembling the mesh walls (ref. 14 - Fig. 3):

- secure the rst mesh in contact with the structure using the

screws (11) and stop with the nuts (13);

- proceed with the assembly of the additional mesh walls (de-

pending on the equipment) xing them with the screws (12)

and nuts (13).

4) Assembling the gate (E1)

► Remove the screws (2) and nuts (6) from the kit supplied.

● Secure the gate to the structure using the holes provided.

Side wall

ASSEMBLY MANUAL

DOG KENNEL - LABRADOR MODEL Rel. 08-2022 - Rev. 0

EN - Translation from the original language (Italian)

Ferranti s.r.l. Unipersonale

Via Vicinato n. 43 - Frazione Fratta - 06036 Montefalco (PG) - Italy

Tel. (+39) 0742 399096 [email protected] - www.ferrantinet.com

5) Assembling the roof (F1 - F2)

► Take the hooks (4), nuts (7), rhomboidal washers (8), at

washers (9) + gasket and self-tapping screws (5) from the

kit supplied.

● Secure the roof (F1- large part) to the gate with the appro-

priate hooks (4); insert the rhomboidal washers (8), the

at washers (9), the nuts (7) and the gasket.

● Slide the other part of the roof (F2) until it is recessed un-

der the roof (F1); secure both roofs with the self-tapping

screws (5).

- Unire il frontale ed il retro della cuccia con i pannelli laterali (fig. 1)

- Incassare i pannelli in rete sui pannelli laterali

- Fissare il cancello con le sei viti a testa tonda ; nel caso di un box allungato, fissare il

telaio come da fig. 8, poi proseguire con il montaggio del tetto

- Fissare la parte più grande del tetto al cancello con gli appositi ganci

- Incassare l’altra parte del tetto a quella montata, e fissarla con le viti autofilettanti (fig. 5)

- Inserire i ganci di rinforzo come in fig. 6, e passare le viti nelle pareti laterali

- Nota: stingere completamente le viti solo alla fine e dopo aver controllato lo squadro della

struttura

- Montare il tettino all’interno della cuccia (fig. 7), ed inserire la pedana in legno

- Per l’allungamento del cortile anteriore montare l’apposita staffa in modo da far uscire una

vite (fig. 8), poi su questa proseguire con il montaggio del recinto

(fig. 2)

(fig. 3)

(fig. 4)

- Togliere la plastica trasparente di protezione dai pannelli isolanti (aiutarsi con un taglierino)

- Si consiglia di applicare del silicone sulle giunture del tetto

Ferranti

BOXmodularemod.Labrador

SCHEMA DIMONTAGGIO

FrattadiMontefalco(PG)

● In the holes provided on the side walls, insert the screws (1)

with the at washer (9). Secure with the nuts (7).

● Attach the reinforcement hooks (3) to the screws (1), then

secure with the gaskets (8) and nuts (7).

- Unire il frontale ed il retro della cuccia con i pannelli laterali (fig. 1)

- Incassare i pannelli in rete sui pannelli laterali

- Fissare il cancello con le sei viti a testa tonda ; nel caso di un box allungato, fissare il

telaio come da fig. 8, poi proseguire con il montaggio del tetto

- Fissare la parte più grande del tetto al cancello con gli appositi ganci

- Incassare l’altra parte del tetto a quella montata, e fissarla con le viti autofilettanti (fig. 5)

- Inserire i ganci di rinforzo come in fig. 6, e passare le viti nelle pareti laterali

- Nota: stingere completamente le viti solo alla fine e dopo aver controllato lo squadro della

struttura

- Montare il tettino all’interno della cuccia (fig. 7), ed inserire la pedana in legno

- Per l’allungamento del cortile anteriore montare l’apposita staffa in modo da far uscire una

vite (fig. 8), poi su questa proseguire con il montaggio del recinto

(fig. 2)

(fig. 3)

(fig. 4)

- Togliere la plastica trasparente di protezione dai pannelli isolanti (aiutarsi con un taglierino)

- Si consiglia di applicare del silicone sulle giunture del tetto

Ferranti

BOXmodularemod.Labrador

SCHEMA DIMONTAGGIO

FrattadiMontefalco(PG)

6) Assembling the inner roof (F3) and the bench

● Enter the inside of the box and install the internal roof (F3)

by securing it to the structure with the appropriate hooks (G).

● Insert the wooden bench (H).

7) Finishes

● Remove the transparent protective plastic from the insulated

panels (use a cutter).

● It is advisable to apply silicone to the roof joints.

CLEANING

Clean the structure periodically (or in the presen-

ce of obvious dirt). Sanitise, disinfect and clean the

inside of the kennel with suitable products that are not

harmful to the health of the person and the animal.

SCRAPPING AND DISPOSAL

RECYCLING

The materials that compose the structure must be

disposed of according to the type and procedures

provided for by the legislation in force in the country

of installation.

For further detailed information on the disposal of this product,

contact the municipal o󰀩ce, the local waste disposal service or

the store where it was purchased.

G G

Otros manuales de Producto para el cuidado de mascotas de FERRANTI

FERRANTI

FERRANTI Whelping Box Manual de usuario

FERRANTI

FERRANTI COLLIE Manual de usuario

Manuales populares de Producto para el cuidado de mascotas de otras marcas

Schwinn

Schwinn Rascal Manual de usuario

K&H

K&H Small Animal Manual de usuario

SHOR-LINE

SHOR-LINE 006.3230.00 Manual de usuario

Petsafe

Petsafe Stubborn Dog Receiver Collar Manual de usuario

Datamars

Datamars OMNI MAX Manual de usuario

Trixie

Trixie 24444 Manual de usuario

Roverpet

Roverpet 30DDPP Manual de usuario

SportDOG

SportDOG SD-105S-C Manual de usuario

Staywell

Staywell 400 Series Magnetic Manual de usuario

Dogtek

Dogtek Sonic Birdhouse Manual de usuario

Togfit

Togfit Deluxe Trigger Lock Door Gate Manual de usuario

Girafus

Girafus 227PA Manual de usuario

ubbink

ubbink KoiFeeder Solar Manual de usuario

ULTRACOM

ULTRACOM KOIRA-GPS Manual de usuario

CADOCA

CADOCA Deuba 106911 Manual de usuario

Dogtra

Dogtra RR Deluxe Manual de usuario

Carson

Carson CONVERTIBLE PET YARD 2200 Manual de usuario

Creative Cedar Designs

Creative Cedar Designs K-9 Kabin Manual de usuario