Ferranti s.r.l. Unipersonale
Via Vicinato n. 43 - Frazione Fratta - 06036 Montefalco (PG) - Italy
Tel. (+39) 0742 399096
ASSEMBLY MANUAL
CHICKEN COOPS
Rel. 08-2022 - Rev. 0
EN - Translation from the original language (Italian)
mesh base, 25x25 mm mesh 2 mm wire.
• Door dimensions (WxH): 380x790 mm.
• Accessories:
- Enclosure, mesh fence (description and features below).
►GROUND – RAISED CHICKEN COOP: sheet metal / in-
sulated
• Standard version capacity: up to 12 hens (up to 20 if used
only as an overnight shelter).
• Maxi version capacity: up to 20 hens (up to 40 if used only
as a night shelter).
• The structure is made of galvanised sheet metal, with rear
part in treated marine plywood and mesh front, 25x25 mm
mesh 2 mm wire.
• Ground model: without platform; the hen house is suitable for
animals that roam on the ground.
• Raised model: including mesh base that ensures protection
from any predators such as: weasels, foxes and martens. The
structure of the base is made using tubular elements suitable
to support the weight of a person, thereby allowing entry.
• Insulated model - all models: to be used in those areas
where protection from the cold is required. The material used
to insulate the chicken coop is 100%, top-quality polyurethane.
• Door dimensions (WxH): 440x1170 mm.
• Includes a 1400x550 mm internal perch, feeder and trough.
• Accessories:
- Enclosure, mesh fence (description and features below).
►ACCESSORY: MESH FENCE ENCLOSURE FOR CHICK-
EN COOP
Available on request.
Made of galvanised mesh size 25x25 mm, wire 2 mm; possibility
to add other modules.
The enclosure is free on one side to be installed in contact with
the front of the hen house, becoming the extension to allow the
hens to roam around on the ground during the day, and then be
locked at night inside the hen house in complete safety.
OVERALL DIMENSIONS
MINI RAISED MODEL (sheet metal / insulated)
External dimensions (WxDxH) mm 1370x1400x1330
Internal dimensions (WxDxH) mm 1200x1250x1220
(*)Enclosure dimensions (WxDxH) mm 1370x2000x1330
GROUND MODEL
(sheet metal / insulated)
STANDARD MAXI
(WxDxH)
External dimensions mm 1860x1690x1660 1860x2430x1660
Internal dimensions mm 1770x1500x1640 1770x2250x1640
(*)Enclosure dimensions
mm 1860x2000x1660
RAISED MODEL
(sheet metal / insulated)
STANDARD MAXI
(WxDxH)
External dimensions mm 2050x1690x1820 2050x2430x1820
Internal dimensions mm 1750x1500x1620 1750x2250x1620
(*)Enclosure dimensions
mm
2050x2000x1820
W = Width / D = Depth / H = Height
(*)Available on request.
UNPACKING
►Place the structure near the nal installation site and on a
stable and horizontal area of the ground.
►Remove the packaging materials taking care not to damage
the components.
ATTENTION
DANGER! Keep out of the reach of chil-
dren and animals.
Packaging materials (plastic bags, straps, etc.)
can be a source of danger to health (e.g. suo-
cation).
►Divide the packaging materials according to their type and
dispose of them in accordance with the provisions in force
regarding the disposal of waste.
RECYCLING
All the packaging materials are recyclable and
must be disposed of in accordance with the lo-
cal legislation.
STANDARD EQUIPMENT
MINI RAISED MODEL: SHEET METAL / INSULATED
1L Self-tapping screws
6.30x40 No. 12
2L Short self-tapping
screws 6.30x15 No. 2
GROUND / RAISED MODEL: IN SHEET METAL
Ground Raised
1L 1L
Self-tapping
screws 6.30x60
No. 8
2L 2L
Short self-tap-
ping screws
6.30x15
No. 2
−3L Screws
M8x60 No. 4
−4L Nuts No. 4
1L
2L
1L
2L
3L
4L
