ORIGINAL INSTRUCTIONS
4
Entanglement hazards can result in choking, scalping and/or lacerations if loose clothing,
personal jewellery, neckware, hair or gloves are not kept away from the tool and
accessories.
loves can become entangled with the rotating drive, causing severed or broken fingers.
Rotating drive sockets and drive extensions can easily entangle rubber-coated or
metal-reinforced gloves. do not wear loose-fitting gloves or gloves with cut or frayed fingers.
ever hold the drive, socket or drive extension.
Keep hands away from rotating drives.
3.4 Operating hazards
The following apply.
The use of the tool can expose the operator's hands to hazards including crushing, impacts,
cuts and abrasions and heat. Wear suitable gloves to protect hands.
Operators and maintenance personnel shall be physically able to handle the bulk, weight
and power of the tool.
Hold the tool correctly; be ready to counteract normal or sudden movements and have both
hands available.
Maintain a balanced body position and secure footing.
Release the start-and-stop device in the case of an interruption of the energy supply.
Use only lubricants recommended by the manufacturer.
Do not use in confined spaces and beware of crushing hands between tool and workpiece,
especially when unscrewing.
3.5 Repetitive motions hazards
When using a power tool for, the operator can experience discomfort in the hands, arms,
shoulders, neck, or other parts of the body.
While using an assembly power tool for threaded fasteners, the operator should adopt a
comfortable posture whilst maintaining secure footing and avoiding awkward or off-balanced
postures. The operator should change posture during extended tasks, which can help avoid
discomfort and fatigue.
If the operator experiences symptoms such as persistent or recurring discomfort, pain,
throbbing, aching, tingling,
numbness, burning sensations or stiffness, these warning signs should not be ignored. The
operator should tell the employer and consult a qualified health professional.
3.6 Accessory hazards
The following apply.
.Disconnect the assembly power tool for threaded fasteners from the energy supply before
changing the inserted tool or accessory.
o not touch sockets or accessories during impacting, as this increases the risk of cuts,
burns or vibration injuries.
se only sizes and types of accessories and consumables that are recommended by the
assembly power tool for threaded fasteners manufacturer.
