Feelworld FPV1032 Manual de usuario
User Manual
32ChannelAutoSearching
Wireless Diversity Receiver FPV LCD Monitor
1
Product description：
Wireless FPV monitor with dual receiver LCD monitor is a new
multi-function product, adopt advanced integrated circuits and
High-quality new HD LCD monitor. It integrates a high-sensitivity dual
5.8GHZ AV wireless receivers with auto searching, Aerial receiver,
high-definition monitor. The Monitor casing compact, easy to operate,
can be used for FPV ground station, Security monitoring, baby monitors,
photography viewfinder, construction site video surveillance,
advertising and other venues.
The monitor build-in battery, if you don’t install the battery, you can
use the 9~18V power supply or use the battery plate for external
power supply.
To insure best use of the unit, please read the user’s
manual carefully.
CAUTION
1. Do not use any damaged or leaking battery and please replace the
Battery immediately if its working life becomes short significantly
2. Do not expose this product to direct sunlight, heat or humid
conditions
3. Keep away from strong light while using this product so as to
obtain the clearest and the most colorful picture. Please use sun
shade for the outdoor necessary
4. Please avoid heavy impact or drop on the ground.
5. Do not use chemical solutions to clean this unit. Please simply
wipe with a clean soft cloth to keep the brightness of the surface.
6. Without adjustable component in the unit, please do not take apart
or repair the unit by yourself, to avoid damage the product.
2
Product feature:
●Dual antenna receiver, high-sensitivity, strong
anti-interference
●Set wireless receiver, a monitor for the integration of
Multi-functional combination machine, compact, suitable for a
variety of purposes
●5.8G wireless receiver, 32-channel selection, effectively to
avoid the signal interference
●Channel Auto searching, selection via button
●High brightness, contrast, anti-glare screen with a sun
Shade, sun clearly visible
●with VIDEO input, output, HDMI input, suitable for variety of
Sources.
●Color Control Systems support, enter the menu to manually
Select the appropriate format, and adaptable
●Front headphone monitors playback audio effects
●Build-in battery and optional battery plate, can be equipped
With Variety of battery, No power to facilitate use of the site
in Country
●with VIDEO signal output function, connecting multiple
Monitors.
●Check Field
●Picture Screen Markers and Center Marker
3
CONTENTS
1. Product description --------------------------- 4
2. Wireless transmit receiver operation -- 7
3. Operation instruction ------------------------- 9
4. Power Supply ------------------------------------- 14
5. Parameters --------------------------------------- 17
6. Trouble shooting ------------------------------ 18
4
1. Product description：
1.1 Front panel instruction：
1. Power Indicator
2. POWER：Standby button
3. MODE: Input signal selection button
4. : Multi button for UP/CHANNEL/SEARCH:
Press this button for channel selection LONG pressing for
channel auto searching in OSD for “UP” button
5. ：Multi button for DOWN/Channel selection
5
Press this button for channel selection from “A/B/E/F” in
OSD for “DOWN” button
6. MENU：Menu key, as exit button when on BAND selection
7. ▶:Volume up, press this key to increase the volume
control, menu item selection for settings adjustment
8．◀：Volume down and center mark button, press this key
for center mark on/off. If would like to make the volume
down, press “▶” firstly and then press this button for
adjustment. Menu item selection for Settings
adjustment
9．SCALE: SCALE on and settings
10．CAMERA: CAMERA mode on/off
11．FOCUS: FOCUS on/off
12．：Stereo earphone jack
13．LCD screen
6
1.2 Rear battery plate instruction：
1、VIDEO OUT: Composite video signal output
2、HDMI: HD HDMI signal input
3、VIDEO IN: Composite video signal input
4、USB data ungraded port
5、AUDIO IN: Audio signal input
6、Power switch “ ”Indicates that the power is turned，
“O” means Disconnect the power
7、Power input jack
8、Battery Pack
9、Antenna
10、11: It is a screw hole for battery plate, when you use battery
external, 10 is“+”, 11 is“-”, Copper Screw size:M3×9.5mm
A：Battery plate locking screw hole, 4 holes, Copper Screw
size: M3×5.0mm
B: 75×75mm VESA, Screw size: M4×5.0mm
7
2 .Wireless transmission receive operation
Take the form a complete set of the antenna assemble on the unit’s
antenna input ports, the assembly should secure, locked on the
buckle.
2.1 Channel selection
Wireless transmitter channel and receiver channel must be
strictly consistent; otherwise it will not receive a transmitter
signal.
This unit can auto searching for 32 receiver channels, also can
accept simultaneously multi transmitters and receivers together work,
to avoid co-channel interference
(Frequency range of each region are different, please check the
unit’s paste instructions).
8
Note! During select channels must be supporting
the transmitter
2.2 Auto Searching:
Confirm that the transmitter has entered a normal working
condition and then turn on the monitor, press “MODE” and select
“RF” signal input. Long pressing “ ” ,“Auto Searching” will
display on the top left corner of the screen means the machine start
to auto searching when the screen on the upper left corner shows
the BAND:X CH:X, images, said that finished searching. now can be
received the signal.
2.3 Manual Searching and setting:
Confirm that the transmitter has entered a normal working
condition and then turn on the monitor, press “MODE” and select
“RF” signal input. “BAND: X CH: X” will display on the top left corner
of the screen Press “” to switch channel A/B/E/F. Press
9
“” to select 1~8 channel. If the time transmitter has worked,
receiver and transmitter frequency in agreement, the receiver will
receive the signal sent from the transmitter and displayed on the
monitor
Note: The effect of receiving the distance has a great
relationship with the reception power of the transmitter and the
receiver venues. If the reception is poor, the antenna can be
replaced with three leaves, four leaf antenna or panel antenna.
Replace the antenna should pay attention to the antenna and
receiving the same frequency.
3. Operating instructions：
3.1 Button instructions：
POWER Standby button
MODE Input Signal selection button
Multi button for UP/CHANNEL/SEARCH:
Press this button for channel selection LONG
pressing for channel auto searching in OSD for
“UP” button
Multi button for DOWN/Channel selection
Press this button for channel selection from “A/ B/
E/ F” In OSD for “DOWN” button
Tabla de contenidos
Otros manuales de Monitor de Feelworld
Feelworld
Feelworld Master MA7S Manual de usuario
Feelworld
Feelworld Master MA6P Manual de usuario
Feelworld
Feelworld PVR733 Manual de usuario
Feelworld
Feelworld MA5 Manual de usuario
Feelworld
Feelworld F5Pro Manual de usuario
Feelworld
Feelworld LUT7S Manual de usuario
Feelworld
Feelworld FPV821 Manual de usuario
Feelworld
Feelworld FW1018SPV1 Manual de usuario
Feelworld
Feelworld FW619AHT Manual de instrucciones
Feelworld
Feelworld Master MA7U Manual de usuario
Feelworld
Feelworld FW279 Manual de usuario
Feelworld
Feelworld DH101 Manual de usuario
Feelworld
Feelworld Master MA7 Manual de usuario
Feelworld
Feelworld F970 Hoja de instrucciones
Feelworld
Feelworld FW678 HD Manual de usuario
Feelworld
Feelworld Master MA6 Manual de usuario
Feelworld
Feelworld FW7D-DRM Manual del propietario
Feelworld
Feelworld FW689 Manual de usuario
Feelworld
Feelworld F970 Manual de usuario
Feelworld
Feelworld Master MA6F Manual de usuario
