Feelworld LUT 6 Manual de usuario
6″ 3D LUT Touchscreen Monitor
2600nits Daylight Viewable
User Manual
1
Product Overview
Thank you for using our 6 inch ultra bright touch screen monitor.
This monitor has SDI (optional), HDMI input and output, auxiliary
power output, touch screen menu operation, HDR monitoring and
support user 3D LUT upload and other features. Advanced features
include Parade, Vector, Histogram, Audio Meter, Focus Assist,
False Color, Zebra Exposure, Pixel to Pixel, Center Marker, Safety
Marker, Marker Mat, Monochrome, Image Freeze, Zoom,
Anamorphic etc. It is an ideal, portable and lightweight viewfinder
and video monitor.
The monitor is equipped with a battery plate; you can use the power
adapter supply or use the external battery for power supply.
To insure the best use of the unit, please read the
user’s manual carefully
CAUTION
1. Please avoid the heavy impact and drop onto the ground when
move the product.
2. The screen of this product is made of glass.Keep away from
injury if the screen is broken.
3. Keep the product away from the heat source, and avoid the
prolonged exposures to the sun as the LCD screen will be
damaged.
4. Please do NOT use chemical solutions to clean this product.
Please wipe the monitor with a clean soft cloth to maintain the
brightness of the surface.
5. No adjustable components are in the monitor. Please do not take
apart or repair the unit by yourself, to avoid the damage of the product.
2
FEATURES
Touch screen menu operation
Support HDR monitoring
User custom 3D LUT import by SD card
1920x1080 full HD IPS screen, 2600nits daylight viewable
All Waves display, Parada, Vector, RGB Histogram functions
Histogram is a quantitative tool to inspect the image brightness,
to guide the exposure control
Focus Assist (red, green, blue, white, yellow five peaking colors
optional)
Audio Meter
Zebra and False Color function, convenient to guide the using
light when shooting and the post production
Monochrome (gray, red, green, blue)
Image Zoom-in function
Anamorphic Mode
Image Flip H and Flip V, Auto Mirror
Image Freeze
Pixel to Pixel
Marker Mat, Center Marker and Safety Marker
Brightness, Contrast, Sharpness, Hue, Saturation and Color
Temp Adjustment.
Stereo Earphone output
DC 8.4V power out to power your DSLR camera or mirrorless
camera
3
CONTENTS
1. Product Description ------------------------------------------ 4
1.1 Button Instructions -------------------------------------------- 5
1.2 Port Instructions (Bottom) ----------------------------------- 5
1.3 Port Instructions (Left) --------------------------------------- 6
1.4 Power Supply Way ------------------------------------------- 6
1.5 Installation Way ------------------------------------------------ 7
2. Menu Operation Instructions ------------------------------ 8
3. Menu Function Instructions ------------------------------- 10
4. Support Formats ---------------------------------------------- 14
5. Technical Parameters --------------------------------------- 14
6. Trouble Shooting --------------------------------------------- 15
4
1. Product Description
Front Panel
Back Panel
5
1.1 Button Instructions
:Long press to turn on and off the power; short press
to turn on and off the screen touch function
MENU: Long press to open the main menu and short press to open
the shortcut menu. Rotate the wheel to select a menu item, press it
again to open the corresponding menu function.
(See details: 2. Menu Operation Instruction)
1.2 Port Instructions (Bottom)
:3.5mm earphone port output
DC IN 12V: DC power input, polarity as the input power
DC OUT 8.4V: DC power output, polarity as the output power
Barrel output for powering your camera with a separately available
DC coupler via adaptor (like NP-FW50 Sony & LP-E6
Canon&DMW-BLF19 Panasonic).
SD Card: SD card slot, 3DLUT upload via SD card and for firmware
upgrade
6
1.3 Port Instructions (Left)
1.4 Power Supply Way
(1) The rear cover of the monitor is equipped with a F970 battery
plate, which is applicable to F970 series of batteries.
Sony F970 battery plate for battery of Sony DV:
Sony F970 F960 F950 F930 F770 F750 F730 F570 F550 F530
series
Remark: It is recommended to use standard original F970
batteries. Different specifications of the battery have different
capability. The working time for the monitor will be different.
Higher capability (working time) will be longer. Please take off
the battery from the monitor if you don’t use the monitor in a
long time.
(2) DC IN 12V: DC power input, polarity as the input power
, Barrel (5.5mm outer, 2.1mm inner) at the bottom of the
7
monitor, DC 7~24V Input.
1.5 Installation Way
(1) Mount Points
There are (2) ¼-20 thread points (bottom & right side) can be easily
connected to the hot shoe mount, tripod fixed installation.
(2) Tilt Arm Mounting
The monitor secures to your camera using the included Tilt Arm via
shoe mount or 1/4"-20 thread. The Tilt Arm enables 180°of tilt for
convenient monitoring at nearly any angle. A cold shoe on the Tilt
Arm lets you secure equipment (like a microphone, LED light, or
wireless receiver) that would otherwise be displaced from the
camera's accessory shoe.
8
2. Menu Operation Instructions
After the monitor is properly connected to the power supply, the
indicator light is on (red). Long press button to turn on
the monitor, the indicator light turns yellow. After the signal is
connected, the indicator light turns green.
After startup, short press to select to turn the screen
touch function on or off.
2.1 Touch screen menu operation (default touch screen is on)
1．Double-click on the screen to open the main menu (on the left side of the
screen) and click on the corresponding menu to display the secondary
menu. You can enter the corresponding function option to select or set
with the "<" or ">" key of the option. To exit the menu, click the main menu
menu or click the touch screen outside the menu.
②. When the menu is not displayed, swipe up from the bottom of the screen to
open the shortcut menu, and click the shortcut menu function to open or
set the function. Double-click the shortcut menu function, through the
menu box "<" or ">" button, you can customize the function settings. Click
the touch screen outside the shortcut menu to exit the shortcut menu
display.
③．When the menu is not displayed, on the left side of the screen (1/2 split
screen), you can directly adjust the brightness of the screen backlight; on
the right side of the screen (1/2 split screen), you can directly adjust the
volume.
9
Figure:
2.2 MENU Wheel Menu Operations
①．When the menu is not displayed, directly rotate the wheel to backlight or
volume adjustment. The wheel option can be set to backlight or volume in
the menu .
②. Long press the MENU wheel to open the main menu (left side of the
screen), rotate the wheel to select the secondary menu. After selection,
press the wheel to enter the secondary menu, and then rotate the wheel to
select the secondary menu function. After selection, press the wheel to
enter the secondary menu function, rotate the wheel to adjust the
parameters. After the adjustment, press the wheel to confirm and exit the
secondary menu function, rotate the wheel to enter the next adjustment.
When finished, long press the MENU wheel to exit the main menu.
③．Short press the MENU wheel to open the shortcut menu (below the screen),
rotate the wheel to select the shortcut menu option, press the wheel to
directly turn on/off the function, if you press the parameter selection,
repeat the above operation. When finished, long press the MENU wheel to
exit the shortcut menu.
Tabla de contenidos
Otros manuales de Accesorios para cámaras de Feelworld
