TBox-1x & TBox-2x User manual
September 2017 - Version EN 1.1
www.f stiming.com
10. How to up ate the TBox Firmware
Update the firmware is an easy task. No software is required.
a)
Copy and paste the “.bin” file to the USB Flash Drive root directory of the TBox.
Note that you should have only ONE firmware file on the drive. If you want to save the
previous “.bin” files, create a sub-directory
b)
Ensure that you have no file called “UPDATLOG.txt” on the Flash Drive. If so delete it
c)
Disconnect your TBox from your PC
d)
Ensure that the TBox is OFF, then press the ON/OFF button
The 4 Inputs LED’s will switch Yellow then Green to indicate that the firmware updated
successfully
e)
A file “UPDATLOG.txt” is created on the Drive to confirm that the new firmware is
installed
f)
Once the operation completed, it is advised to remove the “.bin” file from the root
directory
11. Technical specifications
Operating temperature: -2 °C to 7 °C
Precision: 1/1 to 1/1 s
Time drift:
TBox-1 , TBox-2
TBox-11, TBox-21
+/- 3ppm from -2 °C to 7 °C
1ppm @ 2 °C; max 2.5ppm from -2 °C to 7 °C
External power input: USB compatible (5V +/- 1 %) up to 1A
Battery:
TBox-1 , TBox-2
TBox-11, TBox-21
LiPo 15 mAh
LiPo 22 mAh
Autonomy:
TBox-1 , TBox-2
TBox-11, TBox-21
5 - 1 hours (1 hours with GPS inactive)
7 - 15 hours (15 hours with GPS inactive)
Bluetooth module: BLE-4.1
Dimension: 124x8 x31mm (Without GPS)
124x86x31mm (With GPS connector)
Weight: 17 gr - 18 gr
