Fastjet F540 Series Manual de usuario

Inkjet Printer

Operation

Manual!

Apr 16th 2020 Edited V1.1

F540/560/560Plus Series

Safety Guidelines 1-------------------------------------
1 safety warning 1--------------------------------------------------------------------
2 Safety prevention 1----------------------------------------------------------------
3 Use 1----------------------------------------------------------------------------------
4 Handling 2----------------------------------------------------------------------------
5 Responsibility 2---------------------------------------------------------------------
Introduction 3---------------------------------------------
1 Appearance overview 3-----------------------------------------------------------
2 Control Panel 3---------------------------------------------------------------------
3 Printhead 4---------------------------------------------------------------------------
4 Ink Core 4----------------------------------------------------------------------------
5 Main Screen 5-----------------------------------------------------------------------
6 Menu Analysis 6--------------------------------------------------------------------
6.1 PRINT DATA 6---------------------------------------------------------------
6.2 USER FIELD 6--------------------------------------------------------------
6.3 PRINT SET 7----------------------------------------------------------------
6.4 INK SYSTEM 8--------------------------------------------------------------
6.5 MACHINE SET 9-----------------------------------------------------------
6.6 F4 Password 10-------------------------------------------------------------
6.7 W) User Deﬁned 10--------------------------------------------------------
6.8 Photocell 1 Set 11----------------------------------------------------------
6.9 Photocell 2 Set 11----------------------------------------------------------
7 Speciﬁcations 12-------------------------------------------------------------------
Printer Operation 13------------------------------------
1 Commission（For F540/560/560Plus）13----------------------------------
2 Start The Printer 14----------------------------------------------------------------
2.1 Start Jet 14-------------------------------------------------------------------
Content

2.2 Inkjet Observation 15------------------------------------------------------
2.3 Drops Observation 16-----------------------------------------------------
3 Stop Jet 17---------------------------------------------------------------------------
3.1 Stop Jet and Clean 17-----------------------------------------------------
3.2 Stop and Clean (Power off during use of the printer) 17---------
3.3 Stop and Clean (long-term stop of use) 17--------------------------
4 Create Message 18----------------------------------------------------------------
4.1 Create a Sample Message 18-------------------------------------------
5 Create/Edit User Field 20-------------------------------------------------------
5.1 Time User Field 20--------------------------------------------------------
5.2 Additional remarks for time user ﬁeld 21-----------------------------
5.3 Barcode User Field 22----------------------------------------------------
5.4 Additional remarks for Barcode User Field 23-----------------------
5.5 Counter User Field 24----------------------------------------------------
5.6 Instructions for Items in the Counter 25------------------------------
5.7 Logo User Field 26--------------------------------------------------------
5.8 Code User Field 28--------------------------------------------------------
5.9 External data User Field 29---------------------------------------------
6 Message Parameters 30--------------------------------------------------------
6.1 Modify message parameters and contents 30---------------------
7 Print Mode Setting 31------------------------------------------------------------
7.1 Single Printing Mode 31--------------------------------------------------
7.2 Continuous Printing Mode 32-------------------------------------------
7.3 Measure mode 33---------------------------------------------------------
7.4 Traverse Printing Mode 34----------------------------------------------
7.5 Repeat Printing Mode 35------------------------------------------------
Maintenance 36------------------------------------------
1 Diagnostic Screen 36-------------------------------------------------------------
Content

4.2 Failure and warning icons 37----------------------------------------------------

4.2.1 Failure icons 37-------------------------------------------------------------

4.2.2 Warning icons 38-----------------------------------------------------------

4.3 Troubleshooting 39----------------------------------------------------------------

4.4 Wash Nozzle 40--------------------------------------------------------------------

4.5 Ink Jet Alignment 40---------------------------------------------------------------

4.6 Drain( For F560Plus ) 41---------------------------------------------------------

4.7 Clean Ink System 41--------------------------------------------------------------

4.8 Sensor and Encoder Wiring Diagram 42-------------------------------------

4.8.1 Sensor Diagram 42---------------------------------------------------------

4.8.2 Encoder Diagram 42-------------------------------------------------------

4.9 Printer Stander 43------------------------------------------------------------------

Content

1. Safety Guidelines

1.1 safety warning

•Maintenance of this equipment must be performed by a maintenance

professional.

•When the printer is connected to the power supply and related circuits, a

lethal voltage is generated. Non-professionals cannot open the circuit

compartment, and cannot check and repair the circuit system.

•The consumables used in the printer may be ﬂammable liquids. The use of

consumables must not only follow the Material Safety Data Sheet (MSDS)

instructions, but also the printer must be regularly inspected and maintained

to minimize safety hazards. (Note: The printer has an alarm function that has

been sent for maintenance time. Please pay attention to whether this

function is normal. If there is an alarm when the printer maintenance time

has expired, please notify the service engineer in time.)

1.2 Safety prevention

•The installation of the printer should be stable and well grounded .

•The printer must be installed in a ventilated place, away from heat, ﬁre and

static electricity. No smoking near the printer.

•The container lid of the ink, solvent and cleaning agent used in the printer

should be tightly closed and stored in a ventilated environment away from

the printer.

•The printer should be kept clean, because the consumables used may be

ﬂammable liquids, and the ink can burn after drying.

•Place a carbon dioxide dry powder ﬁre extinguisher near the printer.

1.3 Use

•The printer is a non-contact inkjet device and is not suitable for all occasions

(such as explosive atmospheres). It should be used in accordance with

safety guidelines and provide a suitable working environment. Otherwise, the

consequences will be borne by the user.

Page 1

•It is recommended to use the original consumables (including inks, solvents,

cleaning agents, maintenance products, etc.) of the printer. You must obtain

the Material Safety Data Sheet (MSDS) from the dealer and read and follow

them carefully. Otherwise the consequences will be borne by the user.

•In operation, wear anti-ink gloves and safety glasses for those who may

touch the consumables.

1.4 Handling

•For machines with ink and solvent in the machine, non-vertical handling is

prohibited. If the printer cannot be kept in a vertical state, the ink and solvent

should be completely drain out before handling.

1.5 Responsibility

•Our company is not responsible for any consequences resulting from

violations of safety instructions, safety requirements and violations of basic

safety practices when using and maintaining the printer.!

Page 2

2. Introduction

2.1 Appearance overview

Introduction：!

1. Power button !

2. Upper：Electronics Compartment 、Control Panel !

3. Lower：Ink Compartment!

4. Connector Panel !

5. Umbilical !

2.2 Control Panel

Page 3

Right View

Front View

Left View

2.3 Printhead

2.4 Ink Core

""!

Ink Core(Front View) Ink Core(Back View)

Page 4

* Exhaust Air Switch

Condenser

Cover

Drain Pipe

* Exhaust Vent Plug

Manifold

Filter

Gear Pump

Flushing

Pump

*Gutter

Pump

*Please remove the exhaust vent plug and turn on exhaust

air switch before use.

*It’s Gutter Pump for F560Plus!

*It’s Addition Pump for F540/F560

Deﬂection Plate

Nozzle

Charge Electrode

Gutter Pipe

Phase Detector

Last Chance Filter

Nozzle connector

2.5 Main Screen

The main screen is the default screen after the printer powered on:!

Instructions:!

1. The current status description area of the device;!

2. A shortcut function keypad includes an user-deﬁned function;!

3. The name of the current message ;!

4. The content of the current message, it’s a WYSIWYG message viewer, the

content of which is consistent with the content printed by the printer;!

5. The printer icon display area contains icons such as consumables, equipment

status, warnings and faults;!

6. The counter of the cumulative number of prints can be reset;#

Page 5

2.6 Menu Analysis

2.6.1 PRINT DATA

1. It is used to select and recall the stored messages , which is equivalent to the “F2

Select Message” on the main screen.!

2. Used to create and edit saved messages.!

3. Used to set the default message parameters.!

4. It is used to delete the messages stored in the printer.!

5. It is used to copy the messages in the printer to the USB storage device.!

6. It is used to copy the messages in the USB storage device into the printer.!

2.6.2 USER FIELD!

1. Used to create and edit saved user ﬁelds.!

2. Used to delete user ﬁelds that have been stored in the printer.!

3. Used to transfer the custom pattern in the printer to the USB storage device.!

4. Used to copy the picture ﬁles (BMP monochrome) in the USB storage device into the

printer.!

5. It is used to set the date and time code. For example, if January is printed as Jan, etc.,

in the time user ﬁeld, the date and time code can be referenced by referring to a

speciﬁc letter, RR can refer to the year code, and SSS can refer to the month code, TT

can reference the day code, UU can reference the hour code, VV can reference the

minute code, some models do not include this function.#

Page 6

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Impresora de Fastjet

Fastjet

Fastjet A400 Series Manual de usuario

Fastjet

Fastjet F500 Series Manual de usuario

Fastjet

Fastjet A470 Series Manual de usuario

Manuales populares de Impresora de otras marcas

Lexmark

Lexmark 1400 Series Manual

Canon

Canon i70 Series Manual de usuario

Evolis

Evolis Elypso Manual de usuario

Kyocera

Kyocera FS-9530DN Manual de usuario

Canon

Canon LASER SHOT LBP-1210 Manual de usuario

Samsung

Samsung BIXOLON SRP-350plusF Manual de usuario

Canon

Canon PIXMA PRO-1 Series Manual de usuario

Canon

Canon PIXMA G3560 Guía de configuración

Dell

Dell Color Laser Printer 2130cn Manual de usuario

Tektronix

Tektronix Phaser 840 Manual de usuario

Epson

Epson ET-7750 Instrucciones de funcionamiento

Canon

Canon CLBR 460ps Manual de usuario

Eltron

Eltron P210 Guide Manual de usuario

Ricoh

Ricoh MD-P1 Manual de usuario

Epson

Epson SC-F7100 series Manual de usuario

Epson

Epson Stylus C40UX Manual de usuario

Canon

Canon imagePASS-A2 Manual de usuario

Canon

Canon S820D Manual de usuario