Fastcom 232/8-PCI Guía rápida de usuario

F™A
ASTCOM
D
A
P
T
E
R
S
FASTCOM™: 232/8-PCI
Advanced Eight Channel RS-232 Interface
for PCI Bus
Hardware Reference Manual
Manufactured by:
9011 E 37th St N
Wichita KS 67226-2006


9011 E. 37TH STREET N.
WICHITA, KANSAS 67226-2006
(316) 636-1131
FAX (316) 636-1163
http://www.commtech-fastcom.com/
COPYRIGHT (C) 1999, 2002, 2003
All rights reserved, including those to reproduce this document or parts thereof in
any form without permission in writing from Commtech, Inc.
FASTCOM and SMART14 are trademarks of Commtech, Inc.
IBM is a registered trademark of International Business Machines Corporation.
Microsoft is a registered trademark of Microsoft Corporation.
WINDOWS is a trademark of Microsoft Corporation.

REVISION NOTES
REVISION PAGE NUMBER CHANGES MADE
2.1 8 Swapped DSR and DCD on loop back plug
description
2.2 12 Changed warranty to 2 years
2.3 6 Added installation manual link
2.4 10 Updated contact information
2.5 3,4
6-8
Changed 1.5 Mbaud to 725 Kbps
Updated Testing Installation and Fastcom
Serial Settings
2.6 1
10
Updated revision level
Changed warranty period to lifetime

CONTENTS
“CE” CERTIFICATE .............................................................................................................. 1
INTRODUCTION
Description / Block Diagram ............................................................................................ 3
Specifications / Features ................................................................................................. 4
Board Layout ................................................................................................................... 5
INSTALLATION
Installing the Hardware / Software................................................................................... 6
Testing the Installation..................................................................................................... 6
FASTCOM SERIAL SETTINGS............................................................................................ 8
ADAPTER CABLE ................................................................................................................ 9
TECHNICAL SUPPORT ..................................................................................................... 10
APPENDIX A
16C854 UART Technical Data ...................................................................................... 11


1
EUROPEAN UNION DECLARATION OF CONFORMITY
Information Technology Equipment
The Company COMMTECH, INC. declares under its own and full responsibility that the product
" Fastcom: 232/8-PCI - Revision 1.2 "
on which is attached this Certificate is compliant to the "89/336/EEC" Directive, amended by 92/31/EEC and
93/88/EEC.
[ ] The product identified above complies with the requirements of the above EU Directive by meeting the
following standards:
• EN 50081-1 (1992) EMC Generic Emission Standard - Part 1, Residential, Commercial and Light Industry
- EN 55022 (1995), CISPR 22 (1993) Limits and Methods of Measurement of Radio Disturbance
Characteristics of Information Technology Equipment, 30 MHz - 1 GHz, Class B Limits
• EN 50082-1 (1992) EMC Generic Immunity Standard - Part 1, Residential, Commercial and Light Industry
- IEC 801-2 (1984), Method of Evaluating Susceptibility to Electrostatic Discharge, Level 4
- IEC 801-3 (1984), Radiated Electromagnetic field Requirements, Level 3
- IEC 801-4 (1988), Electrical Fast Transient/Burst Requirements, Level 2
Products listed on this declaration are exempt from the requirements of the 73/23/EEC directive due to the input
voltage specification as stated in Article 1 of the directive.
The technical documentation required to demonstrate that this product meets the requirements of the EMC Directive
has been compiled by the signatory below and is available for inspection by the relevant enforcement authorities.
In WICHITA, KS on April 11th of 2003
Mr. Glen R. Alvis
Chief Engineer
9011 E. 37th Street North
Wichita, KS 67226-2006
(316) 636-1131
Fax (316) 636-1163

2

3
INTRODUCTION
The Fastcom: 232/8-PCI adapter is one of the fastest, most advanced eight-channel RS-232 adapter in the
industry. Primarily designed for commercial, industrial, and OEM applications, the Fastcom: 232/8-PCI features
eight discrete RS-232 channels, complete with all standard hand-shaking signals for each channel.
The advanced universal asynchronous receiver and transmitter (UART) chips used on the Fastcom: 232/8-PCI
are fully register compatible with standard 16C550 UARTs, but provide extraordinary 128 byte FIFOs for
receive and transmit buffering. This buffering is extremely valuable when working with RS-232
communications within high-overhead operating systems such as Windows NT and Windows 98. Each of the
eight channels of the advanced UARTs on the Fastcom: 232/8-PCI are each capable of all standard baud rates
plus a high-speed mode capable of up to an amazing 725 Kbps. (RS-232 data rates are realistically limited
by cable length and driver/receiver characteristics to data rates less than 725 Kbps.) If your application requires
faster data rates or better noise immunity, we suggest you try our MegaBaud family of RS-232 adapters or our
RS-422 family of PCI adapters, such as the Fastcom: 422/4-PCI.
Software drivers for Windows 98/NT/2000/XP and Linux are supplied. Multiple Fastcom: 232/8-PCI adapters can
be installed in all operating systems.
The Fastcom RS-232-PCI family also includes the four-channel Fastcom: 232/4-PCI and the isolated ground two-
channel Fastcom: IG232/2-PCI. ISA bus versions are also available.
The following is the basic structure of the Fastcom: 232/8-PCI:
RS-232
DB78
8
DRIVERS /
RECEIVERS
PCI
INTERFACE
CONTROLLER
CLOCK
CONTROL
REGISTER
PCI BUS
CS
A0-A2
DATA
INTERRUPT
CLOCK
CHANNEL 1 (OF 8)
TXD
RXD
RTS
CTS
DTR
DSR
DCD
RI

4
SPECIFICATIONS:
UART 16C854
BUFFERING Transmit - 128 bytes
Receive - 128 bytes
INTERFACE RS-232C
TXD, RXD, DTR, DSR, DCD, RTS, CTS, RI
BUS PCI
POWER
REQUIREMENTS: +5 600mA (Typical)
+12 100mA
- 12 100mA
ADDRESS
REQUIREMENTS: PCI Controller 128 bytes
UARTs 64bytes
Control Registers 4 bytes
INTERRUPT
REQUIREMENTS: 1 (per board)
FEATURES:
High performance 16C854 UARTS
Standard on the Fastcom: 232/8-PCI, no extra charge
All baud rates up to 725 Kbps*
128 byte FIFOs for improved throughput
User programmable baud rate
Durable Cables with RFI shielding
Comprehensive Hardware and Software Documentation
* RS-232 data rates are realistically limited by cable length and driver/receiver characteristics to less than 725
Kbps. A clock change is required to achieve baud rates higher than 115.2 Kbps.
Tabla de contenidos
Otros manuales de Tarjeta PCI de Fastcom
Manuales populares de Tarjeta PCI de otras marcas

Belkin
Belkin F5D7000F Manual de usuario

Pericom
Pericom PI7C7100 Manual de usuario

ADLINK Technology
ADLINK Technology cPCI-3548 Manual de usuario

Digium
Digium TE200 Series Manual de usuario

Allo.com
Allo.com 2nd Gen E1/T1/J1 Manual de usuario

Western Digital
Western Digital FireWire PCI Adapter Manual de usuario













