Fanvil i51W Manual de usuario
i51W&i52W&i53W
Indoor Station
Quick Installation Guide
i51W i53W
Package Contents
1
Physical specification
2
Indoor Station Quick Installation Guide Wall-mount Bracket
i51W&i52W&i53W
Indoor Station
Quick Installation Guide
i50W i51SW
Model LCD PoE Wi-Fi
(2.4G) RS-485 Dimension
i51W 4.3”√ √ √ 163x104x26mm
i53W 7”
Touch Screen √ √ √ 176x140x26.5mm
Product appearance description
3
1) Front Panel
① ② ③ ④ ⑤ ⑥
4 pin Cable*110 pin Cable*1 2 pin Cable*1
TA4*30mm Screw*2 PM4*16mm Screw*2 Screw fixing seat*2
i52W 7”√ √ √ 176x140x26mm
No. Description No. Description
1 Management Center Key 4 Return / Hang up key
2 Monitor key 5 Answer key
3 Unlock Key 6 Microphone
2) Rear Panel
⑥
③ ④ ⑤
①②
No. Description Interface
DC Power interface：12V/1A input.
Ethernet interface: standard RJ45 interface, 10/100M adaptive,
it is recommended to use CAT5 or CAT5E network cable.
1 set of RS485 interface: can be connected to card reader, sensor etc.
8 sets of alarm input interfaces: input devices for connecting switches,
infrared sensor, door sensor, vibration sensors etc.
Speaker
1
2
3
4
5
Industrial power interface.
6
3) External device connection diagram
Installation Diagram（two models）
4
Wall bracket Desktop bracket（Buy independently）
Model 1. Wall-mounted Installation
Step 1. Install wall bracket
Without 86 embedded box in the wall
A. According to the position of the cable in the wall, dig out a square hole
(height*width*depth=58.5*60*50mm) that can accommodate all cables.
B. Align the square hole of the wall bracket with the hole digged out before,
then mark the two fixation holes through bracket on the wall.
C. Take down the bracket, using an electric drill to make the two fixation holes
on the wall,then insert the two screw fixing seats provided.
D. Fix the wall bracket on the wall with two TA4*30 screws.
52.06
79.43
28.00
4.00
60.00
4.00
58.43
106.00
90.00
102.00
ABC
TA4*30mm Screw
D
Model 2.Desktop Installation
Align the slot on the rear side of the panel with the pin on the desktop bracket and
slide the bracket up to complete the installation.
Searching IP address
5
There are two methods as shown below to search the device. The default WAN mode
is DHCP.
Method 1:
Open the iDoorPhone Network Scanner, click the Refresh button to search the device
and find the IP address.
(Download address http://download.fanvil.com/tool/iDoorPhoneNetworkScanner.exe)
Step 2. Connect peripherals
A. If you need to connect other input and output devices, please connect to the host
through the cable.
Step 3. Power on the device. If it is working properly, align the slot on the rear side of
the panel with the pin on the wall bracket and slide the host down to complete the
installation.
With 86 embedded box in the wall
A. Make sure all cables in the embedded box .
B. Fix the wall bracket on the 86 embedded box with two PM4*16mm screws.
PM4*16mm Screw
i51W i51W
Method 2:
i51W&i52W:
After booting, long press the unlock key to enter the menu,
click "System Message" --- "Network".
i53W :
After booting, “Menu”--- "Status".
IP Indoor Station Setting
6
Step 1: Log in the web setting page of Indoor Station
Input IP address of indoor station (e.g. http://172.18.70.55) into the address bar of
PC’s web browser.
The default user name and password are both admin.
Step 3：Feature Setting
Step 2：Add the SIP account.
Set SIP server address, port, user name, password and SIP user with assigned SIP
account parameters.
Select “Activate”, and then click Apply to save this setting.
Answer/hang up calls
When the door phone calls the indoor station, click the key to answer the call,
and click the key to hang up the call.
Local Operation
7
Unlock the door
During the call of indoor station and door phone, click the key to unlock the door.
Turn on/off the monitoring
Click the key on the indoor station to check the monitoring screen, and click the
key to exit. (Only support for the communication with video door phone)
Call management center
Click the key on the indoor station to call the management center, and click the
key to cancel the call.
Fanvil Technology Co., Ltd
Add: 4F, Block A, Building 1#, GaoXinQi Hi-Tech Park (Phase-II),
67th District, Bao'An, Shenzhen, China
www.fanvil.com
Step 4：Unlock Setting
Function Key--- Set unlock key type to "DTMF", and value is the password to open
the correct access control device.
Otros manuales para i51W
2
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Sistema de intercomunicación de Fanvil
Fanvil
Fanvil i10S Manual de usuario
Fanvil
Fanvil i20 Manual de usuario
Fanvil
Fanvil i31S Manual de usuario
Fanvil
Fanvil I20-T Manual de usuario
Fanvil
Fanvil Y50r-Y Manual de usuario
Fanvil
Fanvil A10 Manual de usuario
Fanvil
Fanvil I20-T Manual de usuario
Fanvil
Fanvil i66 Manual de usuario
Fanvil
Fanvil i31S Manual de usuario
Fanvil
Fanvil i21 Manual de usuario
Fanvil
Fanvil i16V Manual de usuario
Fanvil
Fanvil i10 Manual de usuario
Fanvil
Fanvil i18S Manual de usuario
Fanvil
Fanvil i51W Manual de usuario
Fanvil
Fanvil i23S Manual de usuario
Fanvil
Fanvil i12 Manual de usuario
Fanvil
Fanvil i56A Manual de usuario
Fanvil
Fanvil i30 Manual de usuario
Fanvil
Fanvil i10V Guía de instalación y uso
Fanvil
Fanvil i51W Manual de usuario
