Fantech FB6 Manual de usuario
Installation Instructions Item #: 402690
Rev Date: 2016-06-16
FB Series
Inline Filter Box with Merv 13 Filter
Product #: 40304
READ AND SAVE THESE INSTRUCTIONS!
Building sciences research has shown that highly efficient filtration of the
outside air before it is delivered to the home is one of the best ways to
reduce the level of particles suspended in your home's air. FEATURES
80-90% Efficiency Designed to meet the air filtration efficiency criteria
required to gain points toward certification in the Leadership in Energy
and Environmental Design (LEEDs) Green Building rating system.
Specification
Cabinet
• 22 galvanized steel
• 10" (250mm) depth x 8" (200m)
height x 20-1/2" (525mm) length
• 6" (150mm) diameter plastic duct connections
• Beige baked enamel powder paint
• Neoprene door seal
• Access door removed with thumb screws
Filter
• Pleated, non-washable
• 10"x20"x1" (nominal)
• Exact dimensions : 9-1/2" x 19-1/2" x 3/4"
• 240 x 495 x 19 mm)
• Rated MERV13 (Arrestance of >98% based on Standard 52.1)
• Listed UL 900 for the US and Canada
Airflow & Pressure Drop
Installation
Disconnect power to any appliances or fans to which you will
be connecting the FB6. Failure to do so may result in injury.
• Seal unused mounting holes with aluminum tape or adhesive to
prevent air leak
• Install the FB6 between your HRV or inline fan and your home's
ducting.
• Make sure access door is oriented so you can easily check the
filter and replace it when needed.
• Use aluminum tape or an adhesive to seal the ducts onto the
duct connections. Duct tape eventually fills with dust and loses its
adhesive.
• If cold air from the outside will pass through the FB6 and it is
located in a warm area, condensation may occur. Insulate the
cabinet if this is a concern in your installation.
• If warm, humid air will pass through the FB6 and it is located in a
cool air-conditioned area, condensation may occur inside the
cabinet. Insulate the cabinet if this is a concern in your
installation.
• Open the access panel and check that the filter is in place and any
packaging is removed.
Maintenance
Replace your filter every three (3) months. Adjust your maintenance
schedule based on how dirty the filter is when you replace it. If the inside
of the cabinet is dirty, wipe with a clean, damp cloth. Enter the date the
filter was installed then the date of each replacement filter. (See back
page for chart)
25 75 125 175 225
12 35 59 83 106
0.10
0.15
0.20
0.25
0.30
0
100
199
299
398
Airow (L/s)
Airow (cfm)
External Static Pressure (in.wg)
External Static Pressure (Pa)
2
Five (5) Year Warranty
This warranty supersedes all prior warranties
DURING ENTIRE WARRANTY PERIOD:
Fantech will repair or replace any part which has a factory defect in
workmanship or material. Product may need to be returned to the
Fantech factory, together with a copy of the bill of sale and identified
with RMA number.
FOR FACTORY RETURN YOU MUST:
•HaveaReturnMaterialsAuthorization(RMA)number.Thismaybe
obtained by calling Fantech either in the USA at 1.800.747.1762 or
in CANADA at 1.800.565.3548. Please have bill of sale available.
•TheRMAnumbermustbeclearlywrittenontheoutsideofthe
carton, or the carton will be refused.
•Allpartsand/orproductwillberepaired/replacedandshippedbackto
buyer; no credit will be issued.
OR
The Distributor may place an order for the warranty part and/or product
and is invoiced. The Distributor will receive a credit equal to the invoice
only after product is returned prepaid and verified to be defective.
FANTECH WARRANTY TERMS DO NOT PROVIDE FOR REPLACEMENT
WITHOUT CHARGE PRIOR TO INSPECTION FOR A DEFECT.
REPLACEMENTS ISSUED IN ADVANCE OF DEFECT INSPECTION ARE
INVOICED, AND CREDIT IS PENDING INSPECTION OF RETURNED
MATERIAL. DEFECTIVE MATERIAL RETURNED BY END USERS SHOULD
NOT BE REPLACED BY THE DISTRIBUTOR WITHOUT CHARGE TO THE
END USER, AS CREDIT TO DISTRIBUTOR’S ACCOUNT WILL BE
PENDING INSPECTION AND VERIFICATION OF ACTUAL DEFECT BY
FANTECH.
THE FOLLOWING WARRANTIES DO NOT APPLY:
•Damagesfromshipping,eitherconcealedorvisible.Claimmustbe
filed with freight company.
•Damagesresultingfromimproperwiringorinstallation.
•DamagesorfailurecausedbyactsofGod,orresultingfromimproper
consumer procedures, such as:
1. Improper maintenance
2. Misuse, abuse, abnormal use, or accident, and
3. Incorrect electrical voltage or current.
•RemovaloranyalterationmadeontheFantechlabelcontrolnumber
or date of manufacture.
•Anyotherwarranty,expressed,impliedorwritten,andtoany
consequential or incidental damages, loss or property, revenues, or
profit, or costs of removal, installation or reinstallation, for any breach
of warranty.
WARRANTY VALIDATION
•Theusermustkeepacopyofthebillofsaletoverifypurchasedate.
•Thesewarrantiesgiveyouspecificlegalrights,andaresubjecttoan
applicable consumer protection legislation. You may have additional
rights which vary from state to state.
Warranty
Date FB6 was installed Date FB6 lter was replace Date FB6 lter was replace
Date FB6 lter was replace
United States10048IndustrialBlvd.•Lenexa,KS66215•1.800.747.1762•www.fantech.net
Canada50KanalaktWay•Bouctouche,NBE4S3M5•1.800.565.3548•www.fantech.net
Fantech, reserves the right to modify, at any time and without notice, any or all of its products’ features, designs,
components and specifications to maintain their technological leadership position.
Distributed by:Contacts
Submitted by: Date:
Quantity: Model: Project #:
Comments:
Location:
Architect:
Engineer: Contractor:
Otros manuales de Sistema de filtración de agua de Fantech
