Fantec MR-35US3R Manual de usuario

Fantec MR-35US3R

MANUAL

CONTENT

1. Product Introduction

1.1 Features

2. Operation

2.1 Hard Disk Installation

2.2 USB3.0 interface or eSATA interface

2.3 RAID Mode settings

2.4 Rebuild Mode

2.5 Initialization, Partitioning and Formatting

3. Notes

3.1 References

4. Raid Modes description

1. Product Introduction

1.1 Features:

The MR-35US3R provides easy access to four standard 3.5” SATA hard drives

through a super speed USB3.0 port or e-SATA port. The device provides USB 3.0

super speed of 5Gbps and e-SATA of 3.0Gbps to reach best data-storage

performance. It supports RAID 0, RAID 1, RAID10, RAID3, RAID 5, BIG

(Combine) and JBOD (Clear RAID) mode. It is very suitable to store and backup

large amounts of data. The MR-35US3R RAID Enclosure is the perfect solution in

the office or home usage.

- Support 4x 3.5”SATA HDD

- Super high speed USB3.0 interface transfer up to 5Gbps

- High-speed e-SATA interface up to 3Gbps

- RAID Modes (over USB3.0 or eSATA)

•RAID0 (2 or 4 disks)

•RAID1 (2 disks)

•RAID 10 (4disks)

•RAID3 (3 or 4 disks)

•RAID5 (3 or 4 disks)

•BIG（2 ,3 or 4 disks)

•Clear RAID or JBOD (1, 2, 3 or 4 disk)

- Fast RAID Rebuild of about 200-250GB/h

- 2x 60mm cooling Fan

- 3 colour multi-function LED

- Support Windows 2000/XP/VISTA/7, MAC OS 10.4 or above, Linux

2. Operation

2.1 Hard Disk Installation:

Sway from side to side the lock , and pull the doorknob to insert 4 hard

disks. Close the doorknob and the installation will be completed (The step will be

represented in terms of following graphs).

Note: Sway the lock at the instructed point .Now you can open the

doorknob in order to install or unload the hard disk.

In Contrast, when you sway the lock to this point , then you cannot open it.

When you install four HDDs, you will discover that the LEDs are glittering with

blue & red lights in turn for a long time. It can help you check and see whether the

HDDs are installed correctly.

2.2 USB3.0 interface or eSATA interface

Insert 4 hard disks, USB3.0 or eSATA cable and power cable have to be

connected.

2.3 RAID MODE settings

CLEAR RAID or JBOD Mode ()

At first set the MODE switch to Clear MODE. Then keep the SET button pressed

and press the power switch. The HDD LED will glitter in turn blue & red while it

carries on the self-checking. During data transfer the HDD LED glitters in purple

light .When the LED sends blue light, it means that the RAID has been cleared. At

this point you can set up you preferred RAID MODE. If you like, you can use the

CLEAR RAID settings as JBOD mode, too.

1. SET RAID0 MODE ()

Switch to RAID 0 and press SET button. After a few seconds, the computer will

automatically capture an USB device. Then open computer management in order

to initialize and format the HDD. At this point all information will be deleted. During

formatting the HDD, the MR-35US3R HDD LED glitter with purple light. When the

LED send blue light, the format procedure is finished and the RAID 0 mode is

ready to use. In order to initialize, partition and format the HDD, refer to pint 2.5 of

this manual.

2. RAID1/10 MODE ()

Switch to RAID 1/10 and press SET button. After a few seconds, the computer

will automatically capture an USB device. Then open computer management in

order to initialize and format the HDD. At this point all information will be deleted.

During formatting the HDD, the MR-35US3R HDD LED glitter with purple light.

When the LED send blue light, the format procedure is finished and the RAID 1/10

mode is ready to use. In order to initialize, partition and format the HDD, refer to

pint 2.5 of this manual.

3. RAID3 MODE ()

Switch to RAID 3 and press SET button. After a few seconds, the computer will

automatically capture an USB device. Then open computer management in order

to initialize and format the HDD. At this point all information will be deleted. During

formatting the HDD, the MR-35US3R HDD LED glitter with purple light. When the

LED send blue light, the format procedure is finished and the RAID 3 mode is

ready to use. In order to initialize, partition and format the HDD, refer to pint 2.5 of

this manual.

4. RAID5 MODE ()

Switch to RAID 5 and press SET button. After a few seconds, the computer will

automatically capture an USB device. Then open computer management in order

to initialize and format the HDD. At this point all information will be deleted. During

formatting the HDD, the MR-35US3R HDD LED glitter with purple light. When the

LED send blue light, the format procedure is finished and the RAID 5 mode is

ready to use. In order to initialize, partition and format the HDD, refer to pint 2.5 of

this manual.

5. BIG (COMBINE) MODE ()

Switch to BIG Combine mode and press SET button. After a few seconds, the

computer will automatically capture an USB device. Then open computer

management in order to initialize and format the HDD. At this point all information

will be deleted. During formatting the HDD, the MR-35US3R HDD LED glitter with

purple light. When the LED send blue light, the format procedure is finished and

the BIG mode is ready to use. In order to initialize, partition and format the HDD,

refer to pint 2.5 of this manual.

2.4 Rebuild Mode

If in RAID MODE 1, 3, 5 and 10 a HDD is damaged and replaced by a new one,

the MR-35US3R will automatically start the rebuild. You can identify a damaged

HDD by a permanent red glittering of the depending HDD LED and a warning

noise of the device. After you have inserted a new HDD, you can follow the

rebuild procedure of the MR-35US3R by a blue & red glitter of the HDD LEDs.

Next to the rebuild you can go ahead working on the unit and the data transfer is

indicated by a purple glitter of the HDD LEDs. When the LED sends blue light, it

means that the RAID rebuild has been finished.

2.5 Initialization, Partitioning and Formatting

Tabla de contenidos

Otros manuales de Almacenamiento de Fantec

Fantec

Fantec QB-X8US3 Manual de usuario

Fantec

Fantec DB-R35DUS Manual de usuario

Fantec

Fantec MR-35DU3 Manual de usuario

Fantec

Fantec MWiD25 Manual de usuario

Fantec

Fantec SQ-35U3e Manual de usuario

Fantec

Fantec MD-26U3 250GB Manual de usuario

Fantec

Fantec DB-228U3 Manual de usuario

Fantec

Fantec MD-26U3 640GB Manual de usuario

Fantec

Fantec MD-26U3 320GB Manual de usuario

Fantec

Fantec MR-2535DUAL Manual de usuario

Fantec

Fantec MWiD25 Manual de usuario

Fantec

Fantec MB-X2U31R Manual de usuario

Fantec

Fantec LD-H35U3 Manual de usuario

Fantec

Fantec MD-26U3 Manual de usuario

Fantec

Fantec MD-26U3 500GB Manual de usuario

Fantec

Fantec QB-X2US3R Manual de usuario

Fantec

Fantec SQ-35U3e Manual de usuario

Fantec

Fantec SQ-X2RU3e Manual de usuario

Manuales populares de Almacenamiento de otras marcas

QNAP

QNAP TS 32PXU Series Manual de usuario

LaCie

LaCie RUGGED RAID Manual de usuario

Freecom

Freecom CLS DOCK Manual de usuario

PNY

PNY Attache P-FD64MBATT3 Manual de usuario

HP StorageWorks MSL2024 Manual de usuario

OLT

OLT 6x6 Maximizer Manual de usuario

Transcend

Transcend JetFlash 160 Manual de usuario

LaCie

LaCie RUGGED MINI Manual de usuario

Thunderbolt

Thunderbolt 600 Manual de usuario

Panasonic

Panasonic LB-DH8 series Manual

Intel

Intel RAID High Availability Manual de usuario

LaCie

LaCie 12big Thunderbolt 3 Manual de usuario

Spectra Logic

Spectra Logic T-Series Spectra T50e Manual de usuario

Panasonic

Panasonic LKM-F931-1 Manual de usuario

Tabernus

Tabernus Enterprise Erase E2400 Manual de usuario

Rocstor

Rocstor COMMANDER 3F series Manual de usuario

HP P9000 Manual de usuario

Western Digital

Western Digital Ultrastar Data60 Manual de usuario