Fantasea BlueRay Radiant Video Light Manual de usuario
1
Fantasea BlueRay Radiant Video Light Instruction Manual 20121223
Fantasea BlueRay Radiant Video Light
(Cat. No. 6041)
Instruction Manual
The BlueRay Radiant Video Light is a
durable and powerful video light,
designed to significantly enhance
color and light in your underwater
videos and still images. Featuring an
ergonomic design and durable
construction, the BlueRay Radiant
Video Light can be comfortably
integrated into any underwater photo
system, such as with action cams,
amphibious cameras, compact digital housings and more. A battery power indicator light around
the power switch enables easy monitoring of the battery power. The light makes use of 3 powerful
LEDs, which provide an ultra bright, even and wide output. A wide beam angle of 110 degrees
makes the BlueRay Radiant suitable to light a wide range of compositions. A 3-level adjustable
power output allows controlling the intensity of the beam in various compositions and diving
conditions, as well as extending the burn time of the light. Color temperature of the beam is warm
and assists with producing vivid and colorful videos and still images without having to use any color
correction filters. Depth rated to 100 meters/330 feet, the BlueRay Radiant Video Light fulfills the
needs of both recreational and technical divers.
Specifications
Depth ratio: 100 meters / 330 feet
Maximum output: 1500 lumens
Beam angle: 110 degrees
Material: Aluminum head, Polycarbonate body
Battery requirements: 2 x 18650 Li-ion batteries
Burn time: 50 minutes at 100% power
LED Lifespan: 30,000 hours
Color temperature –approx. 6,000K
Operation modes: 100% / 50% / 30% power
Power indicator: Green (100%-60% power), Yellow (60%-30% power),
Red (30%-15% power), Flashing Red (15%-1% power)
Dimensions: 46 x 202 mm (diameter x length)
Weight: 222g (without battery)
Includes: Hand lanyard and instruction manual
Optional YS Mount available –BlueRay YS Mount A (Cat. No. 4028)
Optional Red Filter available - RedEye Filter ORF46 (Cat. No. 5189)
2
Fantasea BlueRay Radiant Video Light Instruction Manual 20121223
Identification of BlueRay Radiant Video Light Parts
LED Head
Power Switch
Battery Indicator Light
Hand Lanyard Insert Slot
Instructions for Use
A. Installing & Removing Batteries
a. Please read the following information and warnings prior to purchasing and installing
batteries inside the BlueRay Radiant Video Light:
i. Only 2 x 18650 rechargeable 3.7-volt Li-Ion batteries should be installed inside
the light.
ii. Make sure that the 18650 batteries you install inside the light feature a
protective circuit board (PCB). 18650 batteries with a protective circuit board
are also known as 19670.
iii. Warning! Installation of CR123 batteries inside the light is strictly forbidden, as
this will burn out the light and may cause irreparable damage.
iv. Warning! Lithium-ion batteries can explode or cause a fire if they are used
incorrectly or if they are defective. Therefore, you are recommended to read
the following instructions very carefully:
1) Each time before using the battery, carefully check the battery and in
particular the protective seal/casing to make sure that it is undamaged and
intact. If in doubt, take the battery to a chemical waste disposal facility.
2) Always handle the battery with care. Never drop the battery!
3) Store the battery in a safe and dry place and keep the battery away from
all metal objects.
4) Never expose the battery to temperatures above 100 degrees Celsius.
5) Only use chargers that have specially been designed for use with lithium-
ion batteries.
6) When charging batteries, keep the charger away from highly flammable
materials or products and never leave the charger unattended when in
use.
7) Please follow the guidelines and restrictions of the batteries you purchase
in order to avoid any damage.
b. To open the BlueRay Radiant Video Light, hold the hand grip firmly in one hand with the
hand grip pointing towards your body and the LED head pointing away. Turn the LED head
clockwise until it separates. Pull the LED head off.
c. Install or remove 2 x 18650 Li-ion batteries inside the body of the light. Make sure to
follow the instructions diagrams printed on the interior of the battery compartment and
2
4
1
3
1
1
4
3
2
3
Fantasea BlueRay Radiant Video Light Instruction Manual 20121223
note that batteries should be installed with their positive ends pointed towards the LED
head.
d. Re-install the LED head on the opening, carefully aligning it with the thread on the body of
the light and tightening it evenly in a counterclockwise fashion all the way to the end. Do
not use force and do not allow it to screw down unevenly.
e. It is recommended to occasionally apply a slight amount of silicone grease to the black O-
ring seals found below the threads of the body of the light prior to replacing the LED head.
f. Install the hand lanyard on the light by inserting it through the Hand Lanyard Insert Slot on
the back of the light, then pulling it through itself and testing it in order to make sure it is
secure.
B. Turning the BlueRay Radiant Video Light On/Off
a. In order to switch the light on, push and hold the power switch button for a second. Take
special care not to stare into the light beam or shine it into the eyes of anyone else,
because the light is powerful and could damage ones’ eyes.
b. When the BlueRay Radiant Video Light is turned on, the colorful light around the power
switch button serves as a battery indicator and shows the battery charge level:
i. Green (100%-60% power)
ii. Yellow (60%-30% power)
iii. Red (30%-15% power)
iv. Flashing Red (15%-1% power)
c. In order to switch the light back off, push and hold the power switch button for 3 seconds.
The light flashes 3 times and then turns off.
d. Note that the BlueRay Radiant Video Light features 3 power output modes in the following
order: 100% power output, 50% power output and 30% power output. Once the light is
turned on, in order to switch between the power output modes, simply push the power
switch button. Each time the power switch is pushed, the power mode is altered according
to the order of power modes as listed above.
C. Mounting the BlueRay Radiant Video Light on an Arm
a. An optional BlueRay YS Mount A (Cat. No. 4028) enables mounting the BlueRay Radiant
Video Light on any arm or connector that features a standard YS Mount at the top, such as
on Fantasea Flex Arms.
b. In order to install the BlueRay YS Mount A on the BlueRay Radiant Video Light, first apply a
slight amount of silicone grease on the two O-rings featured on the interior of the YS
Mount without removing them. This will allow for a smoother installation.
c. Remove the hand lanyard from the light.
d. Install the YS Mount by sliding it on the body of the light, starting from its rear end and all
the way towards the LED head, till it reaches a widening and can no longer be slid forward.
e. If you want to re-install the hand lanyard on the back on the light, then you can do this
now.
f. Remove the screw from the bottom of the YS Mount by unscrewing it all the way out.
g. Position the BlueRay Radiant Video Light over the arm so that the YS Mount on top of the
arm is aligned with the YS Mount at the bottom of the LED light.
h. Install the screw all the way through the YS Mount and arm connectors. Tighten it enough
to keep the LED light in a fixed position.
4
Fantasea BlueRay Radiant Video Light Instruction Manual 20121223
D. Care & Maintenance
a. After each dive, carefully soak and rinse exterior components in fresh water.
b. Visually examine the two O-ring seals found below the threads of the body of the light
prior to replacing the LED head. Any sand, dust or hair lines must be removed from this
area in order to ensure a perfect watertight seal.
c. Store the BlueRay Radiant Video Light in a protected, dry and shaded area.
d. Remove batteries when storing the LED light for an extended period of time.
e. Avoid disassembling any parts of the light other than the LED head.
f. Please note that there is never a need to use force when closing or opening the light or
when turning it on or off.
Fantasea Products Consumer Limited Warranty
“Fantasea” warrants this Fantasea Line branded product against defects in materials and
workmanship under reasonable use for a period of ONE (1) YEAR, (two years, where required by
law as determined by the origin of the authorized dealer). This warranty is effective from the date
of retail purchase from Fantasea or an authorized Fantasea dealer, by the original end-user
purchaser (“Warranty Period”). This warranty does not cover any commercial use of the product.
If a product defect arises and a valid claim is received within the Warranty Period, at its option,
Fantasea, or its authorized service facilities will either (1) repair the product defect at no charge,
(2) exchange the product with a product that is new or which has been manufactured from new or
serviceable used parts and is at least functionally equivalent to the original product. The warranty
will not extend beyond the original warranty period.
Your Fantasea Product should be registered within 30 days of purchase. You must keep the proof
of purchase which indicates the date on which the purchase was made; as you may be required to
show proof of purchase if you need warranty service. The following conditions apply: 1. This
warranty extends to the original purchaser only. It is not assignable or transferable. 2. The
warranty does not cover damage resulting from misuse, abuse, negligence, or accidents. Proper
maintenance of the Product is the responsibility of the owner. 3. The warranty does not cover
damage directly or indirectly resulting from the use of unauthorized replacement parts or service
performed by unauthorized facilities. 4. This warranty does not cover any damage to any other
product used in conjunction with the Fantasea product, including cameras and lenses, and
resulting from any defect in the product materials or workmanship. 5. The cost of sending the
product back to Fantasea or its authorized service facilities is the responsibility of the customer. 6.
The warranty does not cover any incidental damages resulting from any defects in the product.
This expressly includes any travel reimbursements or any other costs associated with the
purchaser’s optional use of the product. The conditions of this warranty are expressly in lieu of all
other expressed warranties, including the payment of consequential or incidental damages for the
breach of any warranty. Please register your product on line at this URL:
http://www.fantasea.com/registration.
[email protected]icontact us atFor further information, please
www.fantasea.comor visit our website
Tabla de contenidos
