FA-TECH VEGA MB-97 Manual de usuario

US Version

Page of1 26

VEGA MB-97

Operator’s Manual

FATech Diagnostics Italia

Corporate Headquarters

37, Via Sisto V

63074, San Benedetto del Tronto (Italia)

Tel.+39 0735 592648

User Resources and Customer Support

Contact your FATech Diagnostics Italia representative for customer support. For the latest informa-

tion on FATech Diagnostics Italia products and services, please visit the FATech Diagnostics Italia

website at: www.fatechdiagnostics.com

Scope

This document contains basic information on the use and operation of VEGA MB-97 Cassette

Printer and assumes you have received basic training on the instrument. Please contact your FAT-

ech Diagnostics Italia representative for information not provided in this manual. This manual does

not provide instructions for the installation or upgrade of hardware.

Introduction

The VEGA MB-97 Cassette Printer is designed to generate a unique identification mark in the

form of high-resolution linear bar codes, two-dimensional bar codes and text onto VEGA MB-97

Cassettes hence reducing errors due to misidentification of cassette blocks or specimen slides

caused by illegible handwriting. The VEGA MB-97 Cassette Printer comes equipped with 6 maga-

zines with a capacity to accommodate 60 Laser Cassettes. Optional additional magazines are

available for easy cassette style or color changes.

Intended Use

The VEGA MB-97 Cassette Printer is intended for imprinting identification marks on FATech Tis-

sue Cassettes for histology.

Installation Procedure

The VEGA MB-97 Cassette Printer and associated software must be installed, and instrument

performance is to be verified, at the customer site by trained FATech Diagnostics Italia representa-

tives.

Relocation Procedure

Contact your FATech Diagnostics Italia representative before relocating your VEGA MB-97 Cas-

sette Printer.

Disclaimers

This manual is not a substitute for the detailed operator training provided by FATech Diagnostics

Italia, or for other advanced instruction. A FATech Diagnostics Italia representative should be con-

tacted immediately for assistance in the event of any instrument malfunction

Page of2 26

Table of Contents 
Section 1 | Safety 4...............................................................................................................................
Instrument Compliance 6...................................................................................................................
Component Location 7..........................................................................................................................
Section 2 | System Specifications 9......................................................................................................
Section 3 | VEGA and Cassette Printing Software 10...........................................................................
Launching VEGA Software 10...........................................................................................................
Loading Cassettes 12.....................................................................................................................
Load HUB button 12.......................................................................................................................
Extra hoppers carousel 12.............................................................................................................
Printing Cassettes 13........................................................................................................................
Prioritizing Cassettes 13....................................................................................................................
Adding Cassette 13........................................................................................................................
To add or edit cassette click on “HUB” and you will get a new screen “Modify cassette-maga-
zine”. 13..........................................................................................................................................
Section 4 | Creating a new User 15......................................................................................................
Generate a copy of the parameter list 16..........................................................................................
Data Export 16...................................................................................................................................
Section 5 | Troubleshoot cassette jam 17.............................................................................................
Section 6 | Marked cassettes dispensing methods 18..........................................................................
Section 7 | Maintenance 19...................................................................................................................
Removal of marking dust. 19.............................................................................................................
LASER LENS Cleaning every 6 months. 19......................................................................................
Mechanical test every 6months. 19...................................................................................................
APPENDIX A | LASER SAFETY 20......................................................................................................
Laser Hazard Classifications 20........................................................................................................
APPENDIX B | SYMBOLS DEFINITION 23..........................................................................................
APPENDIX C | LABELS PLACEMENT 24............................................................................................
WARNING FOR USERS DIODE Lifespan 24...................................................................................
Page of3 26

Section 1 | Safety

Caution Symbol

Optical Laser Safety

Operational Safety

The CAUTION symbol appears on the instrument's product label to remind you

of the necessity to refer to this guide, or other documentation, that outlines labo-

ratory practices required by your facility and local regulatory agencies. Failure to

comply with these requirements may result in a hazardous condition. This may

also nullify the instrument warranty.

The VEGA MB-97 Cassette Printer should not be used in any way not specified

by FATech Diagnostics Italia. Otherwise, the protection provided by the instru-

ment may be impaired.

Note: Refer to Appendix B: Symbol Definitions for additional symbols

INVISIBLE LASER RADIATION AVOID EYE OR SKIN EXPOSURE TO DIRECT

OR SCATTERED RADIATION

CLASS 1 LASER PRODUCT, USING

The laser beam Exits the Final lens 6.6 inches (17cm) above the cassette while it

is in the marking position

Never attempt to operate the VEGA MB-97 Cassette Printer without the protec-

tive covers in place.

Never attempt to override any of the safety interlocks on the instruments.

Never attempt to dismantle or repair the laser head. In case of malfunction con-

tact a FATech Diagnostics Italia Service representative.

Any of the actions mentioned above may result in permanent eye or skin dam-

age. Refer to Appendix A for more information on laser safety.

Routine of VEGA MB-97 Cassette Printer is required for maintaining system in-

tegrity and proper operation. Maintenance must be carried out as specified in

this manual. Refer to Section 9 | Maintenance, for more information.

Do not attempt to install or re-locate the VEGA MB-97 Cassette Printer . Doing

so may result in corruption, of data and/or malfunctioning instrument. For Cas-

sette Marker installation contact a FATech Diagnostics Italia service representa-

tive

Locate the VEGA MB-97 Cassette Printer only on a sturdy flat surface.

VEGA MB-97 Cassette Printer is intended for Indoor use only. Maximum oper-

ating altitude is 9,840 ft. (3000m), operating temperature 59 to 95 degrees F, (5

to 35 degrees C), 80% maximum relative humidity, rated 100-240Vac (max range

of 90 to 264Vac), over-voltage category, II, pollution degree 2, IPX0

Please be aware that some discoloration to the FATech Cassettes can occur

when they are subjected to reagents containing picric acid, e.g. Bouin’s Fixative.

Page of4 26

Electrical Safety

Mechanical Safety

FCC

Please be aware that degradation or loss of text printed text on FATech Cas-

settes may occur when they are subjected to solutions containing strong acids

for extended periods of time.

Decalcification processes of tissue in the FATech Cassettes involving strong

acids such as hydrochloric acids or nitric acids should always be validated by the

users prior to implementation.

The main power cord for the VEGA MB-97 Cassette Printer must be plugged into

earthed outlet only. Only use the power cord provided with this product

Be sure to position the VEGA MB-97 Cassette Printer to allow for easy removal

of the main power cord from the back panel.

Never attempt to operate the VEGA MB-97 Cassette Printer without the protec-

tive covers in place.

Never attempt to override any of the safety interlocks on the instruments.

Apart from a class 4 laser, the instrument contains moving machinery that may

cause damage to the user if the above advices are not followed.

Changes or modifications not expressly approved by the party responsible for

compliance could void the user's authority to operate the equipment.

This equipment has been tested and found to comply with the limits for a Class A

digital device, pursuant to part 15 of the FCC Rules. These limits are designed to

provide reasonable protection against harmful interference when the equipment is

operated in a commercial environment. This equipment generates, uses, and can

radiate radio frequency energy and, if not installed and used in accordance with

the instruction manual, may cause harmful interference to radio communications.

Operation of this equipment in a residential area is likely to cause harmful inter-

ference in which case the user will be required to correct the interference at his

own expense.

Page of5 26

Declaration of conformity

Déclaration de conformité

Dichiarazione di conformità

FATech Diagnostics Italia, Srl

declare under our sole responsibility that the product,

déclarons sous notre seule responsabilité que le produit,

dichiariamo sotto nostra unica responsabilità, che il prodotto,

VEGA MB-97 Cassette Printer,

to which this declaration relates is in conformity with the following standard(s) or other normative

documents.

auquel se réfère cette déclaration est conforme à la (aux) norme(s) ou au(x) document(s)

normatif(s).

a cui si riferisce questa dichiarazione è conforme alla/e seguente/i norma/e documento/i normativa/

Instrument Compliance

FATech Diagnostics Italia herby declares the equipment specified conforms to the Classification(s),

Directive(s) and Standard(s) set forth in this document.

FATech Diagnostics Italia produces laser systems within one of two classes as identified and classi-

fied by theCDRH. These are Class I and Class IV. (see CDRH 21 CFR (J) 1040.1 - 1040 .5). End

user of the equipment should be familiar with ANSI, CDRH and OSHA standards for radiation emit-

ting devices as they apply to them also.

Certifications:

- [Saf] IEC 61010-2-101:2015

- [Saf] IEC 61010-1:2010

-[EMC] EN 61326-1:2012

-[EMC] EN 61000-3-2:2019

-[EMC] EN 61000-3-3:20

-FCC CFR 47 Part 15 Subpart B and ICES-003 Issue 7

Page of6 26

Declaration of Conformity

Component Location

Page of7 26

Laser Cooling Fan grid

Laser Label

Cooling Fan grid

USB Port

Interlock Key

ON/OFF Switch

Power supply socket

Organizer connector

Remote Interlock

- USB

- Interlock Key

- ON/OFF Switch

- Remote Interlock

- Power supply sock-

- Organizer connector

- Green: Loading Hub

- Red Reset unit

LED Indicators

Page of8 26

- Cassette hoppers

- Spare hoppers carousel

- Cassette dispensing chute

- LED Indicator label

Section 2 | System Specifications

VEGA MB-97 PH 6 Cassette Printer

Item

Description

Dimensions

D 60 cm X W 20 cm X H 52 cm

Weight

23.3kg

Laser

YAG Class 4 Sealed Laser 2,2-Watts 1064µm wave-

length

Electrical Requirements

110V-240V 50/60 Hz ±10% output 24VDC 5A

Fuses

120V 4 Amp

240V 3 Amp

Max dBA Sound level

55dBA

Max Power

70W

Over Voltage Category

Index Protection

IP55

Hubs (6)

Cassette Capacity

80 Cassettes per Hub

480 Cassettes total

Print Speed

Up to 12 cassettes/minute

Print Resolution

600 dpi

Operating Temperature Range/

Humidity

15°C to 35°C

10% to 80% non-condensing

Barcode compatibility

Data Matrix, QR code, Code 128, Code 29, PDF417

Connectivity to PC

USB

Pollution Degree

Maximum Altitude

2500m

Page of9 26

Section 3 | VEGA and Cassette Printing Software

1. Press the power ON button positioned at the rear of the instrument.

2. Press the Emergency button positioned at the left side of the cover.

When the system will be ready the emergency button will turn RED.

Launching VEGA Software

1. Double-click the VEGA icon

2. Enter User Name and Password.

Default values “administrator/administrator”

3. The cassette marker will perform a self-test.

4. SAMLight will launch in the background.

NOTE: You should see the VEGA and SAMLight icons in the taskbar.

Page of10 26

Tabla de contenidos

Manuales populares de Equipo de laboratorio de otras marcas

Qiagen

Qiagen DML 3000 Manual de usuario

Queensgate

Queensgate NANOSCAN OP400 Manual de programación

Conviron

Conviron GEN1000-GE Manual de usuario

Parr Instrument

Parr Instrument 4560 Manual de instrucciones

IKA

IKA IC control Manual de usuario

Integra

Integra DOSE IT Manual de usuario

Agilent Technologies

Agilent Technologies 5800 ICP-OES Manual de usuario

Endress+Hauser

Endress+Hauser Cleanfit CPA875 Manual de usuario

NI PXI-5422 Manual

Collomix

Collomix Aqix Manual de usuario

SPEX SamplePrep

SPEX SamplePrep 6875 Freezer/Mill Series Manual de usuario

Ocean Insight

Ocean Insight FLAME-NIR+ Manual de usuario

Parker

Parker ALIGN-MG-NA Manual de usuario

BD 644787 Manual de usuario

DENTAURUM

DENTAURUM Compact Megaplus Manual de usuario

Biuged Laboratory Instruments

Biuged Laboratory Instruments BGD 626 Manual de usuario

VWR

VWR SAS Super IAQ Manual de usuario

illumina

illumina MiSeqDx Manual de usuario