DH 32-28 PRO English | 9
www.ffgroup-tools.com
Loss of control can cause personal injury.
f-
Cutting accessory contacting a “live”
tool “live” and could give the operator an electric
f Do not inhale the harmful
dusts generated in drilling or chiseling operation.
The dust can endanger the health of yourself and
bystanders.
f
to produce vibration, the screws and bolts can
fIn cold weather or a long time tool not be used,
minutes to warm up the grease inside, otherwise
fBe sure you stand stably and no one is below when
you using tool is in high location.
f
fDon’t touch any moving parts.
fDon’t leave the tool running itself, operate tool
only when hand-held.
fDon’t point the tool to anybody for the bit could
fDon’t touch the bit or parts close to the bit imme-
diately after operation, they may extremely hot
fAny damage and abnormal happen, please stop to
f Only original parts can be used to
replace by authorized service center.
f Before connect the
the tool can match the power supply, otherwise
the power tool may be damaged and cause injuries.
f Solvent
of chemical material, are not allowed to use, wa-
ter or soap are recommended!
fIn case of damages the replacement of the plug
or the supply cord shall always be carried out by
the manufacturer of the tool or his authorized
service.
fIf the replacement of the supply cord is necessary,
this has to be done by the manufacturer or his
agent in order to avoid a safety hazard.
f
Contact
Penetrating a water line causes property damage
f
-
The power tool is guided more se-
cure with both hands.
term exposure to vibration may cause temporary
or permanent physical injury, particularly to the
hands, arms and shoulders.
First be examined by a doctor and then have regu-
are not being caused or worsened from use. Preg-
nant women or people who have impaired blood
circulation to the hand, past hand injuries, nervous
should not use this tool. If you feel any symptoms
related to vibration (such as tingling, numbness,
soon as possible.
a choice.
-
chine’s rating plate are compatible with the power
supply you intend to connect it to.
This appliance is Class II and is designed for connec-
tion to a power supply matching that detailed on the
an extension lead is required, use an approved and
compatible lead rated for this appliance. Follow all
the instruction supplied with the extension lead.
f
When using an extension cord, be sure to use one
heavy enough to carry the current your product will
draw. An undersized cord will cause a drop in line
voltage resulting in loss of power and overheating.
fAlways replace a damaged extension cord or have
fProtect your extension cords from sharp objects,
f
circuit should be protected with the appropriate
time-delayed fuse. Before connecting the motor to
position and the electric voltage is rated the same
as the voltage stamped on the motor nameplate.
The machine is intended for heavy chiselling and
-
pacting with the appropriate accessories.
