CDD-BL 20V PRO English | 7
www.ffgroup-tools.com
f
Shorting the battery terminals together may cause
f
-
Liquid ejected
from the battery may cause irritation or burns.
This will ensure that the safety of the power
tool is maintained.
f
before you start working.
f
f
insert jams. Be prepared for high reaction torque that
can cause kickback. The tool insert jams when:
It becomes wedged in the workpiece
f-
ing at least the highest no-load speed of the tool.
f
(including children) with reduced physical, sensory or
mental capabilities, or lack of experience and knowl-
person responsible for their safety.
f
f
fSecure the workpiece (a workpiece clamped with
by hand).
fHold power tool by insulated gripping surfaces, when
performing an operation where the cutting accessory
or fastener may contact hidden wiring or its own cord
wire may make exposed metal parts of the power tool
f
call the local utility company for assistance (contact
damaging a gas line can result in an explosion; pene-
trating a water pipe will cause property damage or an
electrical shock).
fAlways wait until the machine has come to a com-
plete stop before placing it down. The tool insert can
fDust from material such as paint containing lead,
some wood species, minerals and metal may be harm-
ful (contact with or inhalation of the dust may cause
operator or bystanders); wear a dust mask and work
f
as oak and beech dust) especially in conjunction with
1.
a. Before charging, read the instructions.
b.
c. Do not charge non-rechargeable batteries.
2.
a. -
ance before it is scrapped.
b. The appliance must be disconnected from the
c. The battery is to be disposed of safely.
d. Do not use non-rechargeable batteries.
e. Do not crush, open or burn the battery. Exposure
to potentially harmful materials may occur.
f. 2dry chemical extinguisher.
g. Do not expose to high temperatures >45°C. Cells
may degrade at high temperatures.
h. The battery must be charged by a constant cur-
i. Charge battery regularly in conditions between
for this battery.
j. -
ommended limits of 10°C to 30°C.
k. Do not use battery if it has been stored at 5°C or
less. Allow it to "normalise" at room temperature
l.
for recycling separately to the product, which is
-
Make sure the power supply information on the ma-
chine’s rating plate are compatible with the power
supply you intend to connect it to.
This appliance is Class II* and is designed for connec-
tion to a power supply matching that detailed on the
the instruction supplied with the extension lead.
*Double insulated: This product requires no
earth connection as supplementary insulation
is applied to the basic insulation to protect
the basic insulation.
fAs a substance under normal conditions of use it is not
-
-
fComposition of lithium-manganese, lithium-cobalt and
-
ous liquid).
