10
ting the product. Failure to follow the instructi
ons provided regarding the product, may result
in accident, serious personal injury and damage
to property. You can help prevent accidents by
being familiar with your product’s controls and by
observing safety operating procedures and safe
ty signs related to it. If this product is to be used
by any other person than yourself, please pass on
this manual as well. Local laws may restrict the mi
nimum age of the operator.
If you encounter a situation where you are uncer
Avoid all usage which you consider to be beyond
move anything that could be a hazardous source
to you or cause damage to the product. Cluttered
areas and benches increase the chances of an ac
materials. Never use the product near or towards
mable or explosive products and any other object
that could be dangerous to the product itself as
well as the operator, bystanders, animals or pro
perty.
could be hurt, as well as items that could be da
maged, while operating the product. Never use
the product or any attachments towards any body
parts, animals, people or property. Bear in mind
that the operator is responsible for accidents and/
or damage occurred to other people, animals or
their property.
Do not use the product in environments with ex
cessive moisture, dust, dirt, corrosive or explosive
vapors.
wet, slippery ground or in any case on uneven or
steep ground that does not guarantee stability for
lighting conditions such as daylight or adequate
Try not to cause any noise disturbance, by only
using this product at reasonable times of the day.
Do not use the product while you are tired or un
Before operating the product always perform a
operational levers of the product must move from
one position to the other easily and must not need
forcing. The handgrips and protection devices
must be clean and dry as well as securely fastened
to the product.
Do not force the product beyond its rated capa
bilities and use it only for the purpose it was de
signed.
Do not mount equipment or accessories on the
product not foreseen or approved by the manu
facturer. Never attempt to modify the product.
result in serious personal injury or the death of
use the correct tool for each job in order to avoid
product failure or injury. Avoid overloading the
product.
move it away to prevent further damage. In case
foreign body has entered the product, stop it im
mediately, inspect it for any damage and repair it
before starting again.
Consult your authorized dealer for disassembly
and service, not covered in this manual.
before and during operating.
from its power source:
fWhen mounting or removing accessories and to
ols.
fWhenever you leave the product unattended.
fDuring cleaning or maintenance.
fDuring repositioning, transportation or storage of
the product.
Do not inhale dust, particles, fumes, exhaust ga
ses and fuel fumes produced during operation or
refuelling of the product.
The noise levels shown in this manual are the ma
and noise emissions. Consequently, it is necessary
mage due to high levels of noise and stress from
vibration. Contact your doctor if you experience
symptoms of overexposure to vibration. Such
symptoms include numbness, loss of feeling, tin
This product may produce an electromagnetic
product interfering with active or passive medical
implants, persons with medical implants have to
consult their physician and the medical implant
manufacturer, before operating this product.
The product was built using modern technology
and in accordance with recognized safety rules.
Even when all safety measures are in place, some
remaining hazards, which are not yet evident, may
be present. The operator should use common
may include but are not limited to: impairment
particles and physical harm due to prolonged use.
