EZ-ON SHT-3107XM/EN Manual de usuario

SHT-3107XM/EN

GC68-01507A ED:01

This marking shown on the product or its

literature, indicates that it should not be

disposed with other household wastes at the

end of its working life. To prevent possible

harm to the environment or human health from

uncontrolled waste disposal, please separate

this from other types of wastes and recycle it

responsibly to promote the sustainable reuse

of material resources.

Household users should contact either the retailer where they

purchased this product, or their local government office, for details

of where and how they can take this item for environmentally safe

recycling.

Business users should contact their supplier and check the terms

and conditions of the purchase contract.

This product should not be mixed with other commercial wastes for

disposal.

Preface

Precautions

󳢯Safety Precautions 2

Chapter 1 Preparation

Names and Functions

󳢯Front of the product 4

󳢯Dial button on the handset/side of the product 5

Chapter 2 Usage

Interphone Function

󳢯Visitor at the entrance 6

󳢯Visitor at the public entrance 6

󳢯Call from Guard office 7

󳢯Calling the Guard office 7

󳢯Calling other households 7

Away/Stay/Security, Emergency Function

󳢯Setting/Releasing Security Functions

󳢯Emergency 9

Alarm Function

󳢯Automatic Notification service 10

󳢯Stop/Restoring Alarm (Away/Security) 10

Video Recording of Visit (option: video memory function)

󳢯Saving the video image of the visitors 11

󳢯Checking the Saved Video Image 11

Chapter 3 Appendix

Troubleshooting

󳢯Check these first! 12

Product Warranty 13

Contents

Safety Precautions

*Read the following contents to use the product safely and correctly.

Precautions

Ignoring the instructions may result in

death or serious injury to the user.

Ignoring the instructions may result in

damage to the property or injury to

the user.

Warning Caution

Do not place the product under or near a

heat source such as a heater, aquarium,

or humidifier.

󳢯It may cause product malfunction

and/or fire.

Do not subject the product to any

heavy shock with a hard object (e.g.

hammer, etc).

󳢯It may cause product

malfunction, electric shock,

and/or fire.

Do not allow water or other liquid to

penetrate the product interior.

󳢯It may cause electric shock and/or fire.

Do not allow water to penetrate the camera

when cleaning the entrance door.

󳢯It may cause product malfunction,

electric shock, and/or fire.

Warning

Do not disassemble, install, or

repair without authorization.

󳢯Contact the service center for any repair needs.

Unauthorized handling may

cause product malfunction,

electric shock, and/or fire.

If the product emits peculiar noise, odor,

and/or smoke, immediately shut down the

circuit breaker connected to the electrical

heater switch in the power

cabinet panel, and contact

the service center.

󳢯It may cause product

malfunction, electric shock,

and/or fire.

Do not hang on or pull the installed product.

󳢯Take special care to prevent such abuse by small

children as they may be injured if they fall

down with the product.

Be careful when standing up after

sitting under the installed product.

󳢯Head injury may occur.

Make sure to hand over the user manual to

the new owner/tenant when moving.

󳢯It can prevent product misuse by the home owner/tenant.

Precautions

Do not use pins or any sharp or pointed

objects to press the buttons or insert

them into the holes.

󳢯It may cause product malfunction, electric shock,

and/or fire.

Do not clean the product with wet cloths

or volatile substances (e.g. alcohol,

benzene, thinner).

󳢯It may cause product malfunction, electric shock,

and/or fire

*Read the following contents to use the product safely and correctly.

Preface

Names and Functions

Dial button on the handset/side of the product

POWER lamp

Green light will be on when power

is supplied.

Front of the Product

Handset

For calling (public) entrance,

guard office, and other

households.

EMERGENCY button/lamp

Press this button in emergency situation.

Red light will blink if you press this button.

ENTRANCE/GUARD button/lamp

Use this button to call a visitor at the entrance or to see

the visitor on the screen.

Also use this button to call the guard office or for

answering the call from the guard office.

Blue light will be on while using.

AWAY/OPEN button/lamp

Use this button to set up or release the Away/Stay mode.

Red light will be on when Away mode is activated.

Blue light will be on when Stay mode is activated.

Use this button to open the door at the (public) entrance

during a call.

Monitor

Video image of the visitor is

displayed.

Speaker

bell sound and alarm sound comes from this speaker.

Preparation

Chapter 1

󳢯Adjusting the screen brightness

While pressing the “MODE, STOP/RESTORE” button for two seconds, use “ +” or “ - ”

button to adjust the brightness.

󳢯Adjust the bell sound

Use“+”or“-“to adjust the bell sound while receiving a call.

󳢯Adjusting the volume

Use“+”or“-“button to adjust the volume while making a call.

Note

MODE, STOP/RESTORE button

Use this button to mode, stop, or restore various functions.

+/- button

Use these buttons for function setting, volume setting, and

adjusting brightness.

[POWER] switch

It is used to turn the unit on or off.

0/Erase button

Use it to erase the recorded video image of the visitor.

󳢬󳢬/Play button

Use it to enter the building number.

It is also used for checking the recorded video image of

the visitor. (Optional function)

0 ~ 9 button

Use these buttons to enter building number/house

number.

#/Record button

Use it to complete the entry of house number.

In manual video recording mode, it is used to record the

video image of the visitor. (Optional function)

※The exterior color of the product is optional.

Visitor at the entrance

Interphone Function

Chapter 2Usage

Call from Guard Office

※The maximum duration of the call with the

entrance is one minute.

※Place the handset to finish the call.

※If you don’t pick up the handset, the video showing

the entrance will turn off automatically after a certain

period of time.

When a visitor press the doorbell, the

monitor rings (ding~dong sound), and the

Entrance/Guard lamp will blink.

Pick up the handset or press the

Entrance/Guard button while holding the

handset to make a call.

Press the Away/Open button to open the door

while talking with a visitor at the entrance.

Guard Office melody will sound and

Entrance/Guard lamp will blink.

(Guard office melody is not same as the

public entrance melody.)

Pick up the handset or press the

Entrance/Guard button while holding the

handset to make a call.

Calling the Guard Office

Pick up the handset and press the

Entrance/Guard button.

Call will be connected when the guard office

answers the call.

▶Opening the entrance door

Visitor at the public entrance

※The maximum duration of the call with the public entrance

is one and half minutes.

※Place the handset to finish the call.

※If you don't pick up the handset, the public entrance video

will turn off automatically after a certain period of time.

Public entrance melody will sound and the

Entrance/Guard lamp will blink.

Then the monitor will turn on and the visitor will

be shown on the screen.

Pick up the handset or press the

Entrance/Guard button while holding the

handset to make a call.

Press the Entrance/Guard button while the handset

is in its cradle to display video of the entrance.

▶

Checking the visitor at the entrance door

※The video showing the visitor at the entrance will turn off

automatically in 50~60 seconds.

Calling Other Households

Pick up the handset and press the building number,󳢬, and the house number, in that order,

and press the # button. You will hear the Guard Office Ring Melody and the call will be

connected when the other end answers the call.

Example) To call the house number 456

in the building number 123.

󱎲→󱎳→󱎴

→󳢬

→󱎵→󱎶→󱎷

→#

󳢯󳢯External emergency sensing function

External emergency sensing function is always enabled in any mode.

󳢯󳢯Security sensing function

Security sensing function is enabled only when Away/Security function is set.

Note

Usage

Chapter 2

Away/Stay/Security, Emergency Function

Emergency

Setting/Releasing Security Functions

Press the Away/Open button while the handset

is in its cradle to set the Away/Security function

and the Away/Open button will turn red.

※Away/Security function can be set only when the door is closed. The sensor will be activated in one minute after setting

Away/Security function.

※While in Away mode, if a visitor press the doorbell then the call is connected to gaurd office so that the visitor can talk with

the guard office. (routed call)

Press the Away/Open button while the system

in Away/Security mode to turn off the Away/Open

lamp and to release the Away/Security function.

▶Setting Away/Security ▶Releasing Away/Security Press the EMERGENCY button in case of

emergency.

The alarm will go off upon sensing emergency,

and EMERGENCY lamp will blink.

Press the Away/Open button twice while

the handset is in its cradle to set the

Stay/Security function and the Away/Open lamp

will turn green.

※The Stay/Security function can be set only when the door is closed. The sensor will be activated in one minute after

setting Stay/Security function.

Press the Away/Open button while the

Stay/Security is set to release the Stay/Security

and the Away/Open lamp will turn off.

▶Setting Stay/Security ▶Releasing Stay/Security

※Press the MODE, STOP/RESTORE button to stop the alarm sound, and press the button one more time to recover

the system in its normal state.

※While the alarm sound is stopped, the system will recover automatically if the MODE, STOP/RESTORE button is

not pressed within five minutes.

Note

save and check the video image of the visitors (Option: Video memory function)

Video Recording of Visitor

Usage

Chapter 2

Notification Function

Automatic Notification Service

󱎲Internal alarm

The alarm will go off for

30 seconds from the

speaker in the main unit.

󱎳Notification to

Guard Office

Emergency will be notified

to the guard office.

The steps 󱎲~ 󱎳will

be repeated two more

times.

Internal alarm will

continue until the

emergency is cleared.

Stop/Restoring Alarm (Away/Security)

Press the MODE,

STOP/RESTORE button to

stop the alarm.

Enter the password using - and

+buttons and press the MODE,

STOP/RESTORE button.

Press the MODE,

STOP/RESTORE button one

more time to recover the

system in its normal state.

Registering the password for resetting security and emergency

󱎲Press the MODE, STOP/RESTORE button for longer than two seconds.

󱎳Press the MODE, STOP/RESTORE button one more time.

󱎴Choose whether to use the password

If the password is to be used, press the + button and emergency lamp will turn red.

If the password is not to be used, press the . button and the emergency lamp will turn off.

When you choose not to use the password, press the MODE, STOP/RESTORE button to clear the password setting.

󱎵Registering the password

Press the MODE, STOP/RESTORE button -> number of + button pressing corresponding to the first digit of the

password -> MODE, STOP/RESTORE button -> number of –button pressing corresponding to the second

digit of the password, in that order. (Emergency, Entrance/Guard, and Away/Open lamps will turn red.)

Example) If the password is 2, 3: Press the - button twice -> MODE, STOP/RESTORE button -> the + button

three times, in that order.

󱎶Confirming the password

Press MODE, STOP/RESTORE button -> MODE, STOP/RESTORE button -> + and –buttons corresponding to

the password -> MODE, STOP/RESTORE button.

󱎷Password setting is completed by pressing the Away/Open button..

※Alarm will go off again if Mode,

STOP/RESTORE Button is not

pressed one more time within five

minutes.

※Applicable only when the password is set.

※Alarm will go off if the password is not entered

within 10 seconds.

Checking the Saved Video Image

※The image of the latest visitor will be shown first.

※If there is no button action for 10 seconds, image viewing mode is cancelled and the unit enters idle mode.

Saving the video image of the visitors

※Up to 32 video image s of the visitors can be saved. (It takes two to three seconds to save one image. When recording the

image manually, place the handset in its cradle in about three seconds.)

※When there is a saved image, Entrance/Guard lamp will blink.

While the system is set to Away/Security mode,

the image of visitor is saved automatically when

the visitor press the doorbell.

While you are talking with a visitor, you can record

the image of the visitor by pressing the #/RECORD

button.

▶Automatic recording ▶Manual recording

Press the 󳢬󳢬/PLAY button for two seconds to

display the saved video image. Move to the next

image by using the 󳢬󳢬/PLAY button.

Press 0/ERASE button in the handset while

the image is shown on the monitor to erase the

image shown on the screen.

▶Checking the saved image ▶Erasing the saved image

󳢯Setting the system time (timestamp will be saved and displayed for the save image.)

1. Press the button 9 on the handset for two seconds.

2. When Year/Month/Date/Hour/Minute are shown, you can move to the fields by depressing button

9in the handset.

3. The selected field will blink, use + or - button to set the time.

4. After setting all fields, press button 9on the handset. Then the time display will disappear and

the entrance video will be displayed. The setting will be automatically saved in about five seconds.

1312

Troubleshooting

Check these first!

The system cannot be turned on.

󳢯Check that the power cord is connected.

The screen is too dark.

󳢯Check the lighting conditions around the place where the external camera is installed.

󳢯Clean the camera installed outside.

󳢯Adjust the brightness of the screen in Function Settings. (Refer to page 4)

The default setting is level 2 out of four levels and a higher level setting makes the

screen brighter.

There is too much noise in voice communication

󳢯Check that the door-phone line is not shorted to the GROUND.

I can’t hear any sound.

󳢯UCheck the volume setting.

󳢯UCheck that the connection between the home unit and the door camera is correct.

Product Warranty

Seoul Commtech products are supplied with a one (1) year warranty based from

the date of purchase, during which time any defective product will be repaired or

replaced with a new or factory rebuilt replacement at no charge.

Warranty Conditions

1. This warranty applies to the original purchase only.

2. The warranty will become invalid in full if unauthorized repair or modifications are

performed to the unit, or in any case of accident, misuse, damage caused by

improper installation and altered serial numbers.

3. If warranty service is required, the customer must send the product to the

customer service center or an authorized dealer. In all cases, the product must

be accompanied by the following items: customer name, address, telephone

number, product serial numbers, and a copy of the purchase receipt that shows

the purchase date and location.

The product model number is included on the package and the front of the manual.

The serial number is located on the product unit. Please record the product model

number and serial number in the spaces provided below. Refer to these numbers

for warranty service.

Model No. Serial No.

Tabla de contenidos

Otros manuales de Sistema de intercomunicación de EZ-ON

EZ-ON

EZ-ON SHT-CP611E Manual de usuario

EZ-ON

EZ-ON SHT-330XM/EN/AU Manual de usuario

Manuales populares de Sistema de intercomunicación de otras marcas

Bticino

Bticino LINEA 3000 Manual de usuario

MSI

MSI MSI-140 Manual de usuario

golmar

golmar Stadio Plus Manual de usuario

CyberData

CyberData 011211 series Manual

Vidos

Vidos duo M1021 Manual de usuario

Vimar

Vimar ELVOX 7539/E Manual de usuario

SSS Siedle

SSS Siedle BTSV 850-03 Manual de usuario

Dahua

Dahua VTO Series Manual de usuario

Elvox

Elvox 5651 Manual de usuario

Videx

Videx VIDEOKIT Series Manual de usuario

Rocom

Rocom Doortello Business FW T2.05W2.04 Manual de usuario

Viking

Viking E-35-EWP Manual de usuario

Safeguard Supply

Safeguard Supply LRA-EX1000 Manual de usuario

SSS Siedle

SSS Siedle BFCV 850 Series Manual de usuario

GRD

GRD MAX V2 Manual de usuario

Alecto

Alecto ADI-250 Manual de usuario

Aiphone

Aiphone IE-8MD Manual de usuario

Perel

Perel EDB4 Manual de usuario