Extron electronics NAV E 121 Manual de usuario

NAV E 121 • Setup Guide

IMPORTANT NOTE:

Go to www.extron.com for the complete user guide, installation instructions, and specications

before connecting the product to the power source.

This guide provides instructions for an experienced installer to install the Extron NAV E 121 streaming encoder and to make all

connections. The Extron NAV encoder and one or more compatible decoders form an AV distribution and switching matrix on a

managed 1G (1 Gbps) IP network.

NOTE: For more information on any subject in this guide, see the NAV E 121 User Guide, available at www.extron.com.

Installation

Step 1 — Mounting

Turn o󰀨 or disconnect all equipment power sources and rack or furniture mount the encoder as required.

Step 2 — Rear Panel Connections

AHDMI input port —Connect an HDMI cable between

this port and the HDMI output port (or DVI port, with an

appropriate adapter) of the digital video source.

BHDMI LOOP OUT port — Connect a display to this port

for local loop-through monitoring of the source signal.

NOTE: See LockIt®Lacing Brackets on page 6

to securely fasten the HDMI connectors to the

encoder for Aand B.

CControl RS-232 port — Connect a serial RS-232 signal

to this 3.5 mm, 3-pole captive screw connector for

bidirectional RS-232 and unidirectional IR communication

with connected remote controlled devices using an Extron control system (see Control connector on page 5 to wire the

connector).

DNAV 1G/PoE+ port — Connect to an Ethernet LAN on which one or more decoders also reside for streaming and control (see

NAV 1G/PoE+ connector on page 5 to wire the connector).

EReset button and LED — This button initiates three modes of reset (see the NAV E 121 User Guide, available at

www.extron.com, for details).

FPower connector — If desired, plug the optional external 12 VDC power supply into this 2-pole connector (see Power

connector on page 5 to wire the connector and Power for power options).

NAV E 121

RxTx

NAV 1G/PoE+

LOOP OUT

HDMI

RESET

POWER

INPUT

RESET

NAV 1G/PoE+

LOOP OUT

HDMI

INPUT

LAN

CONTROL

RS-232

POWER

12V

1.2A MAX

POWER

EEE

AAA

FFFBBBCCCDDD

Top

Rear

Figure 1. NAV E 121 Rear Panel Features

CLASS 1 LASER PRODUCT, see the NAV E 121 User Guide at www.extron.com.

WARNING: The NAV E 121 outputs continuous invisible light (Class 1 rated), which may be harmful to the eyes; use

with caution.

• Do not look into the fiber optic cable connectors or into the fiber optic cables themselves.

• Plug the attached dust caps into the optical transceivers when the fiber cable is unplugged.

AVERTISSEMENT : Le NAV E 121 émettent une lumière invisible en continu (équipement de classe 1) qui peut être

dangereuse pour les yeux ; à utiliser avec précaution.

• Ne pas fixer directement les connecteurs optiques ou les câbles fibre optique.

• Associez les bouchons anti-poussière à l’ensemble émetteur/récepteur optique lorsque le câble fibre optique est

débranché.

NAV E 121 • Setup Guide (Continued)

Step 3 — Front Panel Conguration Port Connection

AConfiguration port —Connect a PC to the encoder via

this front panel USB type C connector for configuration

of the unit. The port uses IP over USB technology; the

IP address is always 203.0.113.22 and CANNOT be

changed. The CONFIG port is also discoverable via

Toolbelt (see the NAV E 121 User Guide). The guide and

Toolbelt are available for download at www.extron.com).

Indicators

BPower LED — Indicates power and startup status.

• Blinking — The unit is receiving power and is booting up.

• Lit steadily — The unit is receiving power and is operational.

CInput LEDs — Indicate status of the signal inputs.

• HDMI — The encoder is detecting an HDMI input.

• HDCP — The HDMI signal is HDCP encrypted.

DNAV Stream LED — Indicates the output status of the AV, as follows:

• Lit steadily – The encoder is actively streaming a NAV output consisting of video, audio, or both.

• Blinking – The encoder is actively streaming a NAV output, but network errors are present.

• Unlit - The encoder is not actively streaming a NAV output.

ELAN LEDs — Indicate status of the network connection.

• Link LED — Lit steadily indicates that a network link is established. Blinking indicates a link speed less than 1G.

•Act LED — Blinking indicates network tra󰀩c. The blink rate corresponds to activity.

FID button and LED — The recessed ID button identifies the encoder to the NAVigator and decoder when pressed. The LED

blinks when the encoder is in pairing mode (see Pairing devices via front panel on page 5 for details).

Operation

Power

The encoder can be powered in one of three ways:

• Remotely, receiving PoE via the NAV 1G/PoE+ port (see Don page 1), either from the network switch or from an optional

PI 130 Power Injector.

• Locally, from an optional external power supply via the power connector (see Fon page 1).

• Remotely (D) and locally (F), with priority on the NAV 1G/PoE+ port. If PoE voltage drops below a threshold, the encoder

immediately transitions to the external power connector with no e󰀨ect on system operation.

When power is applied, the encoder runs a series of self-tests that blink the front panel Power LED and all other indicators. The

encoder then boots the NAV operating system. It can take approximately 60 seconds for self-test and system startup to complete.

When the process is complete, the Power LED lights steadily.

NOTE: The encoder is NOT operational until the boot process is complete (the Power LED is lit steadily).

System Operation

The encoder can be congured and controlled using embedded web pages or Extron Toolbelt (see the NAV E 121 User Guide

available at www.extron.com and the Toolbelt Help le).

NOTE: The Connection via web pages (see page 3), Connection settings (see page 4), and Pairing devices via front

panel procedures (see page 5) may NOT be necessary if your system includes a NAVigator System Manager.

NAV E 121

INPUT

LINK

ACT

LANNAVID

HDMI STREAM

HDCP

CONFIG

EEECCC

AAABBB

DDD

FFF

Figure 2. NAV E 121 Front Panel Features

Connection via web pages

Connection to the encoder and its embedded web pages can be made via either the front panel Conguration (USB) port (using IP

over USB technology) (see gure 2, A on page 2) or the rear panel NAV 1G/PoE+ port (see gure 1, Don page 1).

Access the encoder using HTML pages as follows:

1. Open a web browser.

NOTES:

• Suggested browsers to fully support the NAV system are: Google Chrome™, Mozilla™ Firefox™, and Microsoft®

Edge™.

• The network must be properly configured for multicasting (IGMP). Failure to do so may result in degraded performance.

2. Enter the IP address of the encoder in the browser Address eld.

NOTES:

• Default settings:

Port DHCP IP address Subnet mask

Config (USB)* 203.0.113.22

NAV/PoE+ (RJ-45)On

* For the CONFIG port, the address for IP over

USB CANNOT be changed.

If the unit does not receive a DHCP address, a

self-assigned Link Local Address, is assigned

in the range 169.254.X.X.

• If you use IP over USB, Extron recommends waiting a minute after plugging in the cable for your PC to identify the

USB connection as a valid Ethernet port.

3. Press the keyboard <Enter> key. The browser

displays a privacy error message (see

gure 3 at right for an example in the Chrome

browser).

4. Click Advanced (see gure 3, 1). The

button changes to Hide Advanced and

explanatory text and a link appear below the

button.

5. Click Proceed to <IP address>(unsafe)(2)

(or the equivalent message from your

browser). The browser opens to the Login

dialog box (see gure 4).

3333

33333333

2222

22222222

1111

11111111

Figure 4. Login Dialog Box

6. Enter the Username (see gure 4, 1) and Password (2) and click SIGN IN (3). The browser opens to the embedded

web pages (see gure 5 on page 4).

NOTES:

• The default Username is admin.

• The factory configured passwords for all accounts on this device have been set to the device serial number. If the

password is reset, the encoder reverts to the default password, which is extron.

• Usernames and passwords are case sensitive.

1111111111

1111

2222222222

2222

Figure 3. Privacy Error Message (in Chrome Browser)

NAV E 121 • Setup Guide (Continued)

1111111111

1111

2222222222

2222

Figure 5. HTML Page

NOTE: Detailed descriptions of communication, conguration, and monitoring are provided in the NAV E 121 User Guide,

available at www.extron.com.

Connection settings

View and change connection settings as follows:

1. On the home page, click Settings (see gure 5, 1) >

Networking.

2. Click the Network Connection drop-down list (2).

The Network Connection pane opens (see gure 6), showing

protected views of the network connection settings.

NOTE:Editing of connection settings is disabled when

the device is assigned to an Extron NAVigator System

Manager.

3. To change the settings, click Edit (see gure 6, 1). The Edit

button changes to Save.

4. Click in the desired eld (2) and edit it as necessary.

5. Repeat step 4 as necessary for other values.

6. Click Save.

1111111111

1111

2222222222

2222

Figure 6. Network Connection Pane

NAV E 121 • Setup Guide (Continued)

Pairing devices via front panel

NAV E 121

1. Use a small screwdriver to press and hold the encoder front panel ID button for approximately 3 seconds,

until the ID LED blinks. The encoder enters pairing mode, which allows decoders to receive the AV stream

from encoders.

2. One at a time, use small screwdriver to press and hold the decoder front panel ID button for approximately

3 seconds, until the ID LED blinks three times. The decoder is now paired to the encoder.

3. Repeat step 2 for each decoder.

4. Use a Tweeker or other small screwdriver to press and release the encoder front panel ID button. The encoder exits pairing

mode.

5. Repeat steps 1 through 4 to pair decoders to other encoders.

After all devices are connected, powered on, and paired, the system is fully operational.

Operation in a System with a NAVigator

The Extron NAVigator is a system manager that easily congures and controls the NAV System. The NAVigator supports 16

endpoints by default, but a LinkLicense can upgrade its capabilities to support up to 240 endpoints. See the NAVigator User Guide,

available at www.extron.com for details.

Connection Details

LockIt®Lacing Brackets

1. Plug the HDMI cable into the panel connection (see 1, at right).

333

111

555

444

222

2. Loosen the connection mounting screw from the panel enough to allow the LockIt lacing

bracket to be placed over it (2). The screw does not have to be removed.

3. Place the LockIt lacing bracket on the screw and against the connector (3), then tighten

the screw to secure the bracket.

ATTENTION:

• Do not overtighten the connector mounting screw. The shield it fastens to is very thin

and can easily be stripped.

• Ne serrez pas trop la vis de montage du connecteur. Le blindage auquel elle est

attachée est très fin et peut facilement être dénudé.

4. Loosely place the included tie wrap around the connector and the LockIt lacing bracket as shown (4).

5. While holding the connector securely against the lacing bracket, use pliers to tighten the tie wrap, then remove any excess

length (5).

NAV 1G PoE connector Control connector Power connector

Wire color

White-green

Green

White-orange

White-blue

Orange

White-brown

Brown

Blue

TIA/EIA T

568B

TP Wires

12345678

Pins:

RxTx Gnd

RS-232

Device

RxTx

Power Supply

Output Cord

Ridges

Smooth

Captive

Screw

Connector

16 (5 mm) MAX

SECTION A–A

68-3771-50 Rev. A

09 23

For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the Extron

Safety and Regulatory Compliance Guide on the Extron website.

All trademarks mentioned are the property of their respective owners.

Worldwide Headquarters: Extron USA West, 1025 E. Ball Road, Anaheim, CA 92805, 800.633.9876

Tabla de contenidos

Otros manuales de Convertidor de medios de Extron electronics

Extron electronics

Extron electronics SME 100 Manual de usuario

Extron electronics

Extron electronics VSC 50 Manual de usuario

Extron electronics

Extron electronics NAV 10SD 101 Manual de usuario

Extron electronics

Extron electronics DSC 3G-HD A Manual de usuario

Extron electronics

Extron electronics DVS 406 Manual de usuario

Extron electronics

Extron electronics DSC 3G-HD A Manual de usuario

Extron electronics

Extron electronics DDS 402 Manual de usuario

Extron electronics

Extron electronics DVC RGB-HD A Manual de usuario

Extron electronics

Extron electronics QGE 100 Manual de usuario

Extron electronics

Extron electronics NAV 10SD 501 Manual de usuario

Extron electronics

Extron electronics NAV E 401 D Manual de usuario

Extron electronics

Extron electronics SME 100 Manual de usuario

Extron electronics

Extron electronics DVC 501 SD Manual de usuario

Extron electronics

Extron electronics DVS 304 Manual de usuario

Extron electronics

Extron electronics CD 400 Manual de usuario

Extron electronics

Extron electronics mediaport 200 Manual de usuario

Extron electronics

Extron electronics NAV E 501 Manual de usuario

Extron electronics

Extron electronics Annotator Manual de usuario

Extron electronics

Extron electronics NAV E 101 DTP Manual de usuario

Extron electronics

Extron electronics CVC 300 Manual de usuario

Extron electronics

Extron electronics NAV SD 501 Manual de usuario

Extron electronics

Extron electronics Balanced and Unbalanced Audio Converter BUC... Manual de usuario

Extron electronics

Extron electronics VSC 500 Manual de usuario

Extron electronics

Extron electronics Scan Converter VSC 500 Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario