Extron electronics MediaPort 300 Manual de usuario

IMPORTANT:

Go to www.extron.com for the

product specifications.

MediaPort®300 • Setup Guide

The MediaPort 300 is an HDMI and audio to USB scaling bridge that interfaces between pro AV

equipment and computer-based video conferencing and recording software. Incoming HDMI video is scaled and output via USB to a

host computer. Bi-directional audio is supported over the USB bus, including one stereo pair from the PC for application playback and

far-end communication audio, and one stereo pair to the PC for near-end local audio to be sent to the far end. Setup and control are

available via a front panel USB-C Conguration port and a rear panel Ethernet port. Simple Instruction Set (SIS™) commands and the

Windows®-based Extron Product Conguration Software (PCS) simplify initial conguration and real-time control. The 1-inch (2.54 cm)

high, half rack wide, 6 inches (15.24 cm) deep enclosure can be optionally mounted to a rack shelf, or under or through furniture.

Installation

Step 1 — Mounting

Turn off or disconnect all equipment power sources and mount the MediaPort 300 as required.

Step 2 — Rear Panel Connections

POWER

12V

1.3A MAX

MediaPort 300

USB-C

HOST

RESET

LAN/PoE+

HDMI

LOOP OUT

MIC/LINE LINE

1 2

+48V

INTPUT

LINE

OUTPUT

1 2

EEEGGGCCCFFFBBBDDDAAAIIIHHH

Figure 1. MediaPort 300 Rear Panel Features

AHDMI video input connector — Connect an HDMI video source to this HDMI input connector.

BHDMI video loop out connector — (Optional) Connect a local HDMI monitor (or a DVI monitor, with an appropriate adapter) or a

video conferencing hardware device to the HDMI Loop Out connector.

NOTE: See LockIt®Lacing Brackets on page 4 to secure the HDMI cables to Aand Band a USB type C cable to E.

CMic/Line input port — Connect one of the following to this connector (see Analog audio input connector on page 4).

• One analog balanced or unbalanced microphone input source or mono input source

• One analog balanced or unbalanced, line-level, mono input source

NOTE: The Phantom Power LED, D, lights when 48 V phantom power is supplied for the Mic/Line audio input.

EUSB Host connector — Connect a USB type C cable from this port to an appropriate USB port of a of a USB host device, such

as a PC or Mac for video and audio input and output. The front panel USB Host LED lights when this connection is made.

NOTE: Ensure that the USB host and USB-C cable support USB 3.x, otherwise the supported USB video resolutions are

severely limited.

FLine level audio output connector — Connect an amplifier or other device to the 6-pole captive screw Line output connector

for balanced or unbalanced, stereo or dual mono, analog output (see Line level audio output connector on page 4).

GLAN/PoE+ connector — Connect an Ethernet cable between this port and the network to configure and control the MediaPort

from a remote location using SIS commands, the Product Configuration Software (PCS), or the embedded web page. This port

can also receive Power over Ethernet (PoE+) to power the MediaPort 300 (see Power on page 2 for power options).

HReset button and LED — This button initiates three modes of reset (see the MediaPort 300 User Guide, at www.extron.com).

IPower connector — Plug the included external 12 VDC power supply into this 2-pole connector (see Power for power options).

NOTE:Alternatively, the MediaPort 300 can be powered via PoE+.

IMPORTANT:

Go to www.extron.com for the complete

user guide, installation instructions, and

specifications before connecting the

product to the power source.

MediaPort 300 • Setup Guide (Continued)

Step 3 — Front Panel Configuration Port Connection

MediaPort 300

HDMI STATUS

SIGNAL IN

HDCP IN

LOOP OUT

LOOP HDCP

CONFIG

USB STATUS

HOST

AUDIO RETURN

VIDEO SEND

AUDIO SEND

CCC

AAABBBDDD

Figure 2. MediaPort 300 Front Panel Features

AConfiguration port — Connect a PC to the MediaPort 300 via this front panel USB-C connector to configure the unit via PCS,

SIS, and Toolbelt and for firmware updates.

NOTE: The Conguration port supports TCP/IP connections with a xed IP address of 203.0.113.22.

Indicators

BPower LED — Indicates power and startup status, as follows:

• Lit steadily — The unit is receiving power, either locally or remotely (via PoE+), and is operational.

CHDMI Status LEDs —

• Signal In — An active HDMI input signal is present.

• HDCP In — An HDCP encrypted input signal is being received.

• Loop Out — Video is passing to a sink connected to the HDMI loop out connector.

• Loop HDCP — The signal out of the HDMI loop out is HDCP encrypted.

DUSB Status LEDs — Indicates the status of the USB stream, as follows:

• Host —

• Lit steadily — The MediaPort 300 is connected to an active USB host.

• Blinking — The USB host connection is suspended.

• Unlit — No USB host connection detected.

• Audio Return — Lit steadily indicates that audio is being returned from the USB host.

• Video Send — Lit indicates that video is being output to the USB host.

• Audio Send — Lit indicates that audio is being output to the USB host.

Operation

Power

The MediaPort 300 can be powered in either of two ways:

• Locally, from the included external 12 VDC power supply and via the power connector (see figure 1, Ion page 1).

• Remotely, receiving PoE+ via the LAN/PoE+ port (see G), either from the network switch or from an optional PI 140 Power

Injector.

When power is applied, the MediaPort 300 runs a series of self-tests that cycle through all front panel LED indicators. The

MediaPort 300 then starts up. It can take approximately 30 seconds for self-test and system startup to complete.

Conﬁguring the MediaPort 300

The MediaPort 300 can be congured through a host connected to the LAN or the front panel USB-C Cong port using Extron PCS,

the embedded HTML pages, or using SIS commands (see the MediaPort 300 User Guide at www.extron.com for more information).

ATTENTION:

• Do not power on the MediaPort 300 until you have read the ATTENTION in the “Power Supply” section of the

MediaPort 300 User Guide.

• Ne branchez pas le MediaPort 300 avant d’avoir lu la mise en garde dans la section « sources d’alimentation » du

MediaPort 300 User Guide..

On the Microsoft Windows taskbar, right-click on the speaker icon (see figure 3, 1) and select Open Sound Settings (2). The Sound

dialog box opens, displaying the Playback control panel (see figure 4

MediaPort 300 USB Enumeration

The host PC or Mac detects the MediaPort 300 and installs generic USB UVC (universal video codec) and

UAC (universal audio codec) drivers, a process known as “enumerating”

1111111111

1111

2222222222

2222

Figure 3.

Speaker Pop-up Menu

By default the MediaPort 300 enumerates as a generic webcam plus a non-echo cancelling speakerphone.

Via Extron PCS or SIS command the MediaPort can alternatively be configured to enumerate as a

speakerphone with echo cancellation (if using an external digital Signal Processor [DSP]), or can be

configured to enumerate as only a video or only an audio device.

Congure Windows for the MediaPort 300 as follows:

1. Connect a USB-C cable from the MediaPort 300 rear panel USB-C port to a USB port on a Windows

PC. The required drivers install automatically. A message at the PC notifies you when driver

installation is complete.

2. On the Microsoft®Windows taskbar, right-click on the speaker icon (see figure 3, 1) and select

Open Sound Settings (2).

3. In the Sound Settings window click the Sound Control Panel link in the right-hand column.

1111111111

1111

The Sound dialog box opens, displaying the Playback control panel (see figure 4).

4. Right-click Speakerphone Extron MediaPort 300, (see figure 4, 1) and select

Set as Default Device (2) from the drop-down list.

5. Click the Recording tab in the Sound dialog box (see 3). The Recording

control panel opens (see figure 5).

1111111111

1111

2222222222

2222

Figure 5. Sound Window, Recording

6. Right-click Speakerphone Extron MediaPort 300, (see figure 5, 1) and select

Set as Default Device from the drop-down list (2).

1111111111

1111

2222222222

2222

3333333333

3333

Figure 4. Sound Window, Playback

1111111111

1111

2222222222

2222

3333333333

3333

4444444444

4444

6666666666

6666

5555555555

5555

Conﬁguring macOS®for MediaPort 300

1. Connect a USB-C cable from the MediaPort 300 rear panel USB Host port

to a USB port on a computer running macOS. The required drivers install

automatically. A message notifies you when driver installation is complete.

2. On the computer, click System Preferences >Sound.

3. If necessary, click the Sound Effects tab (see 1, at

far right).

4. Click Extron MediaPort 300 from the Play sound

effects through drop-down list (2).

5. Click the Output tab (3).

6. Click Extron MediaPort 300 from the Select adevice for sound output list

(4).

7. Click the Input tab (5).

8. Click Extron MediaPort 300 from the Select adevice for sound

input drop-down list (6).

On the Microsoft Windows taskbar, right-click on the speaker icon (see figure 3, 1) and select Open Sound Settings (2). The Sound

dialog box opens, displaying the Playback control panel (see figure 4

68-3292-50 Rev. A

10 22

For information on safety guidelines, regulatory compliances, EMI/EMF compatibility, accessibility, and related topics, see the

Extron Safety and Regulatory Compliance Guide on the Extron website.

All trademarks mentioned are the property of their respective owners.

Worldwide Headquarters: Extron USA West, 1025 E. Ball Road, Anaheim, CA 92805, 800.633.9876

Conﬁguring Microsoft Teams for MediaPort 300

The Teams app requires assigning audio input and outputs and allows assigning an optional camera.

1111111111

1111

2222222222

2222

Congure Teams to function properly with the MediaPort 300 as follows:

1. Start the Teams application. Click on the three dots (...) next to the Teams user icon (1).

2. Click Settings (2). The Settings window opens.

3. Click Devices on the left side of the window.

4. Click the Audio devices drop-down list to select Extron MediaPort300 (1).

5. If not automatically selected, click the Speaker drop-down list to select

Speakerphone (Extron MediaPort300 Speakerphone) (2).

6. If not automatically selected, click the microphone drop-down list to select

Speakerphone (Extron MediaPort300 Speakerphone) (3).

7. If video (camera or content) from the MediaPort is to be used in Teams, click

the Camera drop-down list and select Extron MediaPort300 (4).

8. Click on the top right corner to exit the Settings window.

Connection Details

LockIt®Lacing Brackets

1. Plug the HDMI or USB-C cable into the panel connection (see 1, at right for an HDMI example).

333

111

555

444

222

2. Loosen the connection mounting screw from the panel enough to allow the LockIt lacing

bracket to be placed over it (2). The screw does not have to be removed.

3. Place the LockIt lacing bracket on the screw and against the connector (3), then tighten the screw

to secure the bracket.

ATTENTION:

• Do not overtighten the connector mounting screw. The shield it fastens to is very

thin and can easily be stripped.

• Ne serrez pas trop la vis de montage du connecteur. Le blindage auquel elle est

attachée est très n et peut facilement être dénudé.

4. Loosely place the included tie wrap around the connector and the LockIt lacing bracket as shown (4).

5. While holding the connector securely against the lacing bracket, use pliers to tighten the tie wrap, then remove any excess length (5).

Analog audio input connector Line level audio output connector

Unbalanced Inputs

Balanced Inputs

Tip

Sleeve

Ring

Tip

Sleeve

Ring

Tip

Sleeve

Tip

Sleeve

Jumper

NO Ground Here

Do not tin

the wires!

Unbalanced Output

Balanced Output

NO Ground Here

Tip

Sleeve

Ring

Tip

Sleeve

Ring

Tip

Sleeve

Tip

Sleeve

1111111111

1111

2222222222

2222

3333333333

3333

4444444444

4444

Otros manuales para MediaPort 300

Tabla de contenidos

Otros manuales de Convertidor de medios de Extron electronics

Extron electronics

Extron electronics Quantum Ultra Series Manual de usuario

Extron electronics

Extron electronics IN1403 Manual de usuario

Extron electronics

Extron electronics IN1402 Manual de usuario

Extron electronics

Extron electronics VSC 75 Manual de usuario

Extron electronics

Extron electronics CVC 300 Manual de usuario

Extron electronics

Extron electronics DAC 102 Manual de usuario

Extron electronics

Extron electronics mediaport 200 Manual de usuario

Extron electronics

Extron electronics DVC 501 SD Manual de usuario

Extron electronics

Extron electronics VSC 50 Manual de usuario

Extron electronics

Extron electronics DVI to Analog RGB Video Converter DVI-RGB... Manual de usuario

Extron electronics

Extron electronics DSC HD-3G A Manual de usuario

Extron electronics

Extron electronics TSC 100 Manual de usuario

Extron electronics

Extron electronics VN-Matrix 200 Series Manual de usuario

Extron electronics

Extron electronics HAE 100 4K Plus Manual de usuario

Extron electronics

Extron electronics QGE 100 Manual de usuario

Extron electronics

Extron electronics Two InpuT VIdeo Scaler IN1502 Manual de usuario

Extron electronics

Extron electronics CVC 100 Manual de usuario

Extron electronics

Extron electronics DVS 304 Manual de usuario

Extron electronics

Extron electronics DVS 304 Series Manual de usuario

Extron electronics

Extron electronics SME 100 Manual de usuario

Extron electronics

Extron electronics Digital Video Scalers DVS 204 Series Manual de usuario

Extron electronics

Extron electronics RGB to DVI Scaler RGB-DVI 300 Manual de usuario

Extron electronics

Extron electronics NAV E 401 D Manual de usuario

Extron electronics

Extron electronics SME 211 Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario