Extreme Networks ExtremeSwitching Virtual Services Platform 8000... Manual de usuario
Installing the Virtual Services Platform
8000 Series
9035365 Rev 02
March 2020
© 2017-2020, Extreme Networks, Inc.
All Rights Reserved.
Legal Notice
Extreme Networks, Inc. reserves the right to make changes in
specifications and other information contained in this document and
its website without prior notice. The reader should in all cases consult
representatives of Extreme Networks to determine whether any such
changes have been made.
The hardware, firmware, software or any specifications described or
referred to in this document are subject to change without notice.
Trademarks
Extreme Networks and the Extreme Networks logo are trademarks or
registered trademarks of Extreme Networks, Inc. in the United States
and/or other countries.
All other names (including any product names) mentioned in this
document are the property of their respective owners and may be
trademarks or registered trademarks of their respective companies/
owners.
For additional information on Extreme Networks trademarks, please
see: www.extremenetworks.com/company/legal/trademarks
Open Source Declarations
Some software files have been licensed under certain open source or
third-party licenses. End-user license agreements and open source
declarations can be found at: www.extremenetworks.com/support/
policies/software-licensing
Contents
Chapter 1: About this Document............................................................................................. 5
Purpose.................................................................................................................................. 5
Conventions............................................................................................................................ 5
Text Conventions............................................................................................................... 5
Documentation and Training..................................................................................................... 7
Getting Help............................................................................................................................ 7
Providing Feedback................................................................................................................. 8
Chapter 2: New in this document.......................................................................................... 10
Chapter 3: Hardware models for VSP 8000 Series............................................................... 11
Power cord types and order codes.......................................................................................... 16
Chapter 4: Preinstallation checklist...................................................................................... 17
Chapter 5: Installing the Virtual Services Platform 8000 Series......................................... 19
Installation checklist............................................................................................................... 19
Installation fundamentals....................................................................................................... 20
Ethernet Switch Module......................................................................................................... 22
Installing an Ethernet Switch Module................................................................................. 26
Hot swap of VSP 8400 Series Ethernet Switch Module....................................................... 28
40G channelization.......................................................................................................... 30
Electrostatic discharge........................................................................................................... 31
Preventing electrostatic discharge damage........................................................................ 31
Preventing electrostatic damage in new cable installations................................................. 31
Technical specifications......................................................................................................... 32
Package contents.................................................................................................................. 34
Installing the VSP 8000 Series in an Equipment Rack.............................................................. 35
Using the optional slide rack mount kit.............................................................................. 35
Using the supplied brackets............................................................................................. 68
Cable requirements for the VSP 8000 Series........................................................................... 69
Installation and removal of transceivers................................................................................... 70
Installing transceivers...................................................................................................... 70
Removing transceivers.................................................................................................... 70
Console port pin assignments................................................................................................ 71
AC Power Supply.................................................................................................................. 71
Installing an AC power supply.......................................................................................... 71
AC power supply specifications........................................................................................ 73
AC power cord specifications........................................................................................... 74
DC Power Supply.................................................................................................................. 75
Installing a DC Power Supply........................................................................................... 75
DC power supply specifications........................................................................................ 78
Removing a power supply...................................................................................................... 79
March 2020 Installing the VSP 8000 Series 3
Airflow direction..................................................................................................................... 80
Install a Fan Module.............................................................................................................. 80
LED state definitions.............................................................................................................. 82
Switch LEDs................................................................................................................... 82
Management port LED state indicators.............................................................................. 83
SFP, SFP+,QSFP+, and QSFP28 port LED state indicators................................................ 84
RJ45 port LED state indicators......................................................................................... 85
Channelized LED state indicators..................................................................................... 86
Enterprise Device Manager (EDM) representation of physical LED status............................ 87
40GBASE-QSFP+ ports......................................................................................................... 87
MACsec operational notes..................................................................................................... 87
Viewing hardware information................................................................................................. 88
Chapter 6: Translations of safety messages........................................................................ 91
Contents
March 2020 Installing the VSP 8000 Series 4
Chapter 1: About this Document
This section discusses the purpose of this document, the conventions used, ways to provide
feedback, additional help, and information regarding other Extreme Networks publications.
Purpose
This guide provides information and instructions to install the Extreme Networks Virtual Services
Platform 8000 Series (VSP 8000 Series) switches. The VSP 8000 Series includes the VSP 8200
Series and the VSP 8400 Series.
Conventions
This section discusses the conventions used in this guide.
Text Conventions
The following tables list text conventions that can be used throughout this document.
Table 1: Notice Icons
Icon Alerts you to...
Important: A situation that can cause serious inconvenience.
Note: Important features or instructions.
Tip: Helpful tips and notices for using the product.
Danger: Situations that will result in severe bodily injury; up to
and including death.
Warning: Risk of severe personal injury or critical loss of data.
Caution: Risk of personal injury, system damage, or loss of
data.
March 2020 Installing the VSP 8000 Series 5
Table 2: Text Conventions
Convention Description
Angle brackets ( < > ) Angle brackets ( < > ) indicate that you choose the
text to enter based on the description inside the
brackets. Do not type the brackets when you enter
the command.
If the command syntax is cfm maintenance-
domain maintenance-level <0-7> , you can
enter cfm maintenance-domain
maintenance-level 4.
Bold text Bold text indicates the GUI object name you must act
upon.
Examples:
• Click OK.
• On the Tools menu, choose Options.
Braces ( { } ) Braces ( { } ) indicate required elements in syntax
descriptions. Do not type the braces when you enter
the command.
For example, if the command syntax is ip address
{A.B.C.D}, you must enter the IP address in
dotted, decimal notation.
Brackets ( [ ] ) Brackets ( [ ] ) indicate optional elements in syntax
descriptions. Do not type the brackets when you
enter the command.
For example, if the command syntax is show clock
[detail], you can enter either show clock or
show clock detail.
Ellipses ( … ) An ellipsis ( … ) indicates that you repeat the last
element of the command as needed.
For example, if the command syntax is
ethernet/2/1 [ <parameter>
<value> ]..., you enter ethernet/2/1 and as
many parameter-value pairs as you need.
Italic Text Italics emphasize a point or denote new terms at the
place where they are defined in the text. Italics are
also used when referring to publication titles that are
not active links.
Plain Courier Text Plain Courier text indicates command names,
options, and text that you must enter. Plain Courier
text also indicates command syntax and system
output, for example, prompts and system messages.
Table continues…
About this Document
March 2020 Installing the VSP 8000 Series 6
Convention Description
Examples:
•show ip route
•Error: Invalid command syntax
[Failed][2013-03-22 13:37:03.303
-04:00]
Separator ( > ) A greater than sign ( > ) shows separation in menu
paths.
For example, in the Navigation tree, expand the
Configuration > Edit folders.
Vertical Line ( | ) A vertical line ( | ) separates choices for command
keywords and arguments. Enter only one choice. Do
not type the vertical line when you enter the
command.
For example, if the command syntax is access-
policy by-mac action { allow | deny } ,
you enter either access-policy by-mac action
allow or access-policy by-mac action
deny, but not both.
Documentation and Training
Find Extreme Networks product information at the following locations:
Current Product Documentation
Release Notes
Hardware/software compatibility matrices for Campus and Edge products
Supported transceivers and cables for Data Center products
Other resources, like white papers, data sheets, and case studies
Extreme Networks offers product training courses, both online and in person, as well as specialized
certifications. For details, visit www.extremenetworks.com/education/.
Getting Help
If you require assistance, contact Extreme Networks using one of the following methods:
Extreme
Portal
Search the GTAC (Global Technical Assistance Center) knowledge base; manage
support cases and service contracts; download software; and obtain product
licensing, training, and certifications.
Documentation and Training
March 2020 Installing the VSP 8000 Series 7
The Hub A forum for Extreme Networks customers to connect with one another, answer
questions, and share ideas and feedback. This community is monitored by Extreme
Networks employees, but is not intended to replace specific guidance from GTAC.
Call GTAC For immediate support: (800) 998 2408 (toll-free in U.S. and Canada) or 1 (408)
579 2826. For the support phone number in your country, visit:
www.extremenetworks.com/support/contact
Before contacting Extreme Networks for technical support, have the following information ready:
• Your Extreme Networks service contract number, or serial numbers for all involved Extreme
Networks products
• A description of the failure
• A description of any actions already taken to resolve the problem
• A description of your network environment (such as layout, cable type, other relevant
environmental information)
• Network load at the time of trouble (if known)
• The device history (for example, if you have returned the device before, or if this is a recurring
problem)
• Any related RMA (Return Material Authorization) numbers
Subscribe to Service Notifications
You can subscribe to email notifications for product and software release announcements,
Vulnerability Notices, and Service Notifications.
1. Go to www.extremenetworks.com/support/service-notification-form.
2. Complete the form (all fields are required).
3. Select the products for which you would like to receive notifications.
Note:
You can modify your product selections or unsubscribe at any time.
4. Select Submit.
Providing Feedback
The Information Development team at Extreme Networks has made every effort to ensure the
accuracy and completeness of this document. We are always striving to improve our documentation
and help you work better, so we want to hear from you. We welcome all feedback, but we especially
want to know about:
• Content errors, or confusing or conflicting information.
• Improvements that would help you find relevant information in the document.
About this Document
March 2020 Installing the VSP 8000 Series 8
• Broken links or usability issues.
If you would like to provide feedback, you can do so in three ways:
• In a web browser, select the feedback icon and complete the online feedback form.
• Access the feedback form at https://www.extremenetworks.com/documentation-feedback/.
• Email us at [email protected].
Provide the publication title, part number, and as much detail as possible, including the topic
heading and page number if applicable, as well as your suggestions for improvement.
Providing Feedback
March 2020 Installing the VSP 8000 Series 9
Este manual sirve para los siguientes modelos
15
Tabla de contenidos
Otros manuales de Servidor de Extreme Networks
Extreme Networks
Extreme Networks VSP 8000 Series Manual de instrucciones
Extreme Networks
Extreme Networks ExtremeControl IA-A-305 Manual de usuario
Extreme Networks
Extreme Networks ExtremeWireless NX-7500 Series Manual de usuario
Extreme Networks
Extreme Networks ExtremeWireless NX-5500 Manual de usuario
Extreme Networks
Extreme Networks ExtremeControl IA-A-25 Manual de usuario
Extreme Networks
Extreme Networks ExtremeWireless C5215 Manual de usuario
Extreme Networks
Extreme Networks Purview PV-A-300 Manual de usuario
