ExtraHop EDA 4200 Hoja de instrucciones

© 2020 ExtraHop Networks, Inc. All rights reserved.

Install an SSD for Packet Capture on the

ExtraHop Discover Appliance

Published: 2020-06-08

This guide explains how to install the SSD for packet capture in the EDA 4200, EDA 6200, EDA 8200, EDA

9200, and EDA 10200 appliances.

Note: You must have write access to the ExtraHop Web UI and access to the ExtraHop Admin UI

to complete the steps in this guide.

Install the SSD

The SSD for packet capture is hot-swappable. You do not need to power off the ExtraHop appliance to

complete this procedure.

1. Remove the front bezel. Press and hold the release button on the left end of the bezel and swing the

bezel slightly to the right. Gently pull the bezel forward until it disconnects from the USB connector on

the right side of the appliance.

2. Insert the SSD for packet capture that you received from ExtraHop Networks into the correct drive

slot.

Figure 1: EDA 6200 - Slot 6

Figure 2: EDA 8200 - Slot 8

Figure 3: EDA 9200 and EDA 10200 - Slot 14

Enable the packet capture disk

1. Log in to the Administration page on the ExtraHop system through https://<extrahop-

hostname-or-IP-address>/admin.

2. In the Appliance Settings section, click Disks.

Install an SSD for Packet Capture on the ExtraHop Discover Appliance 2

3. In the Unused Disks section, next to SSD Assisted Packet Capture, click Enable.

4. Click OK to add the packet capture disk.

Verify the disk

Follow the steps below to ensure that you can successfully write packets to the new packet capture disk.

1. In the Packet Captures section, click Global Packet Capture.

2. Type a name for the packet capture and then click Start.

3. Click Stop.

4. Return to main Admin UI page and click View and Download Packet Captures.

Note: On Reveal(x) systems, go to the Packets page in the Web UI and confirm that packets

appear in the packets table.

5. Verify that your named packet capture appears in the packet capture list.

6. Click the name of the packet capture and download the file to your computer.

Este manual sirve para los siguientes modelos

4

Tabla de contenidos

Otros manuales de Hardware de red de ExtraHop

ExtraHop

ExtraHop EDA1100 Manual de usuario

ExtraHop

ExtraHop EDA 10200 Manual de usuario

ExtraHop

ExtraHop Discover 1200 Manual de usuario

ExtraHop

ExtraHop Trace 6150 Manual de usuario

ExtraHop

ExtraHop Discover 8200 Manual de usuario

ExtraHop

ExtraHop EDA 1200 Manual de usuario

ExtraHop

ExtraHop EDA 6200 Manual de usuario

ExtraHop

ExtraHop Discover EDA 6200 Manual de usuario

ExtraHop

ExtraHop Discover EH3000 Manual de usuario

ExtraHop

ExtraHop DISCOVER EDA 6200 Manual de usuario

ExtraHop

ExtraHop 72 TB ESU Manual de usuario

ExtraHop

ExtraHop Trace Admin UI Manual de usuario

ExtraHop

ExtraHop ETA 8250 Manual de usuario

ExtraHop

ExtraHop EDA 6200 Manual de usuario

Manuales populares de Hardware de red de otras marcas

Matrix Switch Corporation

Matrix Switch Corporation MSC-HD161DEL Manual de usuario

B&B Electronics

B&B Electronics ZXT9-IO-222R2 Manual de usuario

Yudor

Yudor YDS-16 Manual de usuario

D-Link

D-Link ShareCenter DNS-320L Manual de usuario

Samsung

Samsung ES1642dc Instrucciones de uso

Honeywell Home

Honeywell Home LTEM-PV Instrucciones de montaje

evertz

evertz 7700 Series Manual de usuario

D-Link

D-Link ShareCenter DNS-343 Manual de usuario

Asante

Asante AsanteBridge 1012 Manual de usuario

FireBrick

FireBrick FB2700 Manual de usuario

Audiovox Electronics

Audiovox Electronics ARWH2T Manual de usuario

ADC

ADC DSX-1 Manual

NetComm

NetComm NF2 Manual de usuario

Alcatel-Lucent

Alcatel-Lucent 5620 Manual de usuario

Dell EMC

Dell EMC XC6420 Series Manual de usuario

Lanner

Lanner NCA-1020A Manual de usuario

Allied Telesis

Allied Telesis AT-TN121-A Manual de usuario

Arista

Arista CCA-ETM-Q12 Manual de usuario