Exsound Pearl ll C Manual de usuario
EXSOUND Pearl ll C User's Guide
Pearl ll C Manual Catalog
•Package Contents
--------------------------------------------------------------------------------------
-------------------------------------------------------------------------------
-----------------------------------------------------
03
03
03
•Safety Notice
•Product Features / Hardware Diagram
---------------------------------------------------------- 06
•Product Operation & LED Indicator
--------------------------------------------------- 08
•XBOX360®/ XBOX L Voiceive®Settings
---------------------------------------------------------- 08
•Pearl ll C Connects to XBOX360®
--------------------------------------------------------- 09
•Pearl ll C Connects to XBOX Live®
----------------------------------------------------------------- 10
•Pearl ll C Connects to PS3™
------------------------------------------------------ 10
•PS3™/PlayStation Network Settings
------------------------------------------------------------------- 11
•Pearl ll C Connects to DVD
--------------------------------------------------------------------- 12
•Pearl ll C Connects to PC
-------------------------------------------------- 13
•Pearl ll C Headset Connects to PC/MP3
--------------------------------------------------------------------- 14
•Pearl ll C Connects to TV
------------------------------------------------------------------ 15
•Pearl ll C Connects to Wii™
------------------ --------------------------------------------------------- 15
•Important Information
2
®
Package Contents
Safety Notice
WARNING: Continued exposure to high volumes of noise in headsets can cause long-term hearing damage. Your ears
will adapt to loud volume levels over time and damage your hearing even if you don't feel any discomfort. Keeping the
volume at a safe level is important while using the headset. The louder the sound is set, the less time it takes to affect
your hearing.
When putting the headset on, it is advised to turn the volume to a low level, and then slowly increase it to a moderate
and comfortable level.
Product Features / Hardware Diagram
Product Features
EXSOUND Pearl II C – Experience Surrounding Your XBOX360®/PS3™/Wii™/PC/iPod/LCDTV/DVD
with Dolby Digital 5.1 Sound via Dolby Headphone
3
3 4 5
876 9 10
1
2
1. One EXSOUND Pearl ll C Headset
3. One EXSOUND Pearl ll C Microphone
2. One EXSOUND Pearl II C Breakaway Inline Controller Cable
4. One EXSOUND Pearl ll C Audio Station
10. One Operation Manual
6. One Optical Cable
5. One USB Cable
9. One 3.5 mm plug to 2.5 mm plug Cable
7. One 3.5 mm plug to 3.5 mm plug Cable
8. One G6(F) to 3.5 mm plug *2 Cable
■Dolby Certification for Dolby Digital 5.1, Dolby Pro Logic II, Dolby Headphone
■Empower Stereo Game/Music/Movie to 5.1 Channel Surrounding Sound
■Connect with XBOX360®/PS3™/DVD/PC with Optical; while Wii™/PC/iPod/LCD TV with 3.5 mm Jack
■Output Surrounding Sound through Stereo Headset
■With Our X6 Technology, to Have Stronger Surrounding Effect
■Build in Communication Function to PS3™ via USB, while XBOX360®via XBOX Live®,
with Separated Volume Control
■Connect with Pearl II C Headset for Console Gaming; also can work with PC/Notebook
with either Optical or Analog interface
■Compact and Hand-Held Size & Power by USB, Easy to Carry
Hardware Diagram
A. EXSOUND Pearl II noitatSoiduAC
B. EXSOUND Pearl II C Headset
C. EXSOUND Pearl II C Breakaway Inline Controller Cable
4
A. EXSOUND Pearl II C Audio Station
1. Optical Input: Connect with Optical Output Devices, Like DVD, XBOX360®, PS3™
2. Switch of Optical and Analog Input Selection
3. Analog Input: Connect with Any Analog Audio Output Devices
4. USB Power and Connect to PS3™ for PlayStation® Network Chatting
5. Switch to X6 Technology ON/OFF of Super 3D Sound Effect
6. Power ON/OFF
7. Volume Up
8. Volume Down
9. Switch for Dolby Headphone Selection
10.LED Indicator for Power and Source
11.LED Indicator for Dolby Pro Logic ll ON/OFF
12.LED Indicator for Dolby Headphone ON/OFF
13.LED Indicator for Movie and Music Mode Selection
14.Output to EXSOUND Pearl ll C Headset
4
B. EXSOUND Pearl II C Headset
C. EXSOUND Pearl II C Breakaway Inline Controller Cable
15.High Quality & Soft Material Headband.
16.Easy to adjust to Fit in Head Shape.
17.Detachable Microphone with Indicator. (Note)
18.Soft Metal to Adjust Microphone Position.
19.Omni-direction Microphone.
20. Volume Up/Down
21.With Headset Amp and w/o Amp Selections
(If Use Only Headset To Connect with PC Must be w/o Amp)
22.Microphone Mute/Un-mute
23.Microphone Jack to Communication with XBOX Live®
24.Separate Volume Control for Communication from Others
5
Note:
Connect & Remove Microphone with
Headset by aligning two dots
Secure the Microphone by
Rotating it 90 degrees counterclockwise
15
16
19 18
17
20 22
21
23
24
Product Operation & LED Indicator
Product Operation
1. PWR Button: Power ON/OFF Default is OFF while Power In, Press is ON, Press Again is OFF
2. VOL+ Button: Volume Up Switch
3. VOL- Button: Volume Down Switch
4. Dolby Headphone Button: First Press is Default Dolby Headphone with Movie Mode,then Dolby Headphone with
Music Mode, then Dolby Pro Logic ll and Dolby Headphone are OFF, then Loop.
5. Switch to ON/OFF of Super 3D Sound Effect. Only be Effective if Sound Input is Dolby Digital 5.1 Format
6. Reset Button (Reset to OEM setting ) : Press Volume Up & Down Together,
then Press Power Will Reset to OEM Setting, all 4 LED Will Flash 3 Times with White Color
LED Indicator
LED Light Indicators 4 LEDs , from Up to Down
1. 1st LED: Power/Source Indicator: White Color Means Source is Dolby Digital 5.1 Blue Means Non Dolby Digital 5.1.
2. 2nd LED: Dolby Pro Logic ll ON/OFF Indicator: White means ON, Nil for OFF
3. 3rd LED: Dolby Headphone ON/OFF Indicator : White means ON, Nil for OFF
4. 4th LED: Movie/Music Mode Selection : White for Movie, Green for Music, Nil for Bypass
5. While Dolby Pro Logic ll is OFF, then Both Dolby Headphone & Movie/Music Mode LED are OFF
6
About Dolby Digital 5.1 / Pro Logic II / Dolby Headphone
7
1. Most of Gaming/Movie Titles Are DVD Format, and Encoded with Dolby Digital 5.1 Technology, Multi – Channels
Sound. Need to Have Pearl ll C , with Dolby Digital 5.1 Decoder to Have Original Sound Play back.
2. Sound with Analog Interface, with 2 Channels, Maybe Different Format, Like Pro logic II with WiiTM and Lt Rt from
other Devices , Pro Logic II with simulate these 2 Channels into 5.1 Channels.
3. Dolby Headphone, either Multi-Channel Sounds from Dolby Digital 5.1 or Pro Logic ll ,Dolby Headphone Technology
will Down Mix these Multi-Channels into 2 Channel without Lost Data, and Use 2 Speaker Drivers to Playback these
Multi-Channels Sound with Surrounding Effect.
More Information Please Visit - www.Dolby.com
CENTER
LEFT
SURROUND
RIGHT
SURROUND
LEFT
FRONT
RIGHT
FRONT
SUB
Dolby Surround Sound
8
XBOX360®/ XBOX Live Voice
®Settings
■XBOX360®Audio Settings ■XBOX360 ®sgnitteSecioVeviL
In The XBOX360®Dashboard Select : Press the “ XBOX®Global Button “and go to:
Settings -> Preferences -> Voice ->
Voice Output -> Play through Headset
`System Settings -> Console Settings -> Audio ->
Digital Output -> Dolby Digital 5.1
Pearl ll C Connects to XBOX360®
2. Plug the USB connector into the USB port of XBOX360®and the decoder box.
1. Connect Pearl II C Headset with Breakaway Inline Controller Cable
3. Connect the decoder box and XBOX360®with Optical cable.
4. Plug round 6-pin plug (Male) from inline controller into front of the decoder box. (Note)
5. Slide the Optical/Analog switch on the decoder box to “Optical “.
6. Power on XBOX360®and decoder box.
Note :
Plug 6-pin round plug into decoder box with arrow facing up
9
Pearl II C Connects to XBOX Live®
1. Connect XBOX Live®communication link cable (2.5mm plug to 3.5mm plug) to inline volume controller and
XBOX360®controller
Adjust Others Voice Volume by Turning the Voice Volume Control
®
®
2. Special Note : When you use XBOX Live communication function not allow recharge your controller
from XBOX360
Pearl ll C Connects to PS3™
2. Connect USB Communication cable to an USB port on PS3™ and the decoder box.
3. Connect the decoder box and PS3™ with Optical cable.
4. Plug round 6-pin plug (Male) from inline controller into front of the decoder box.
5. Slide the Optical/Analog switch on the decoder box to “Optical “.
6. Power on PS3™ and decoder box.
PS3™/ PlayStation Network Settings
■PS3™ Audio Settings ■PlayStation Network Settings
Go to PS3™ dashboard and select :
Settings -> Sound Settings -> Audio output settings
->Optical Digital -> Dolby Digital 5.1 CH
Go to PS3™ dashboard and select:
Settings -> Accessory Settings -> Audio Device Settings
-> Set both the input & Output to “USB PnP Sound Device
Note: Make sure that the DTS Box is not checked as
this will cause some games to have no Audio
10
1. Connect Pearl II C Headset with Breakaway Inline Controller Cable
®
®
Tabla de contenidos
Otros manuales de Auriculares de Exsound
