E 08 D 05
4
3.2 MENU STRUKTUR
STAT
W¡0~255¡
DMX
SLAV
DMX
RUN
D. ¡0~512¡
MENU
C¡0~255¡
PERS
STD.P
STD.W
UNO
CAL1 WT.01 W(0-255)
KEY OFF
ON
WT.02 C(0-255)
Z¡0~255¡
WT05
ZOOM POS1
POS2
Z.(0~255)
Z.(0~255)
SET
CALE
REST
DIM
YES
NO
DIM4
OFF
DIM1
DIM2
DIM3
DERR BLAC
SAVE
ZOOM BASE
POS1
POS2
CURV
CV3
CV2
CV1
OFF
ENTER
YES
NO
**** END
ENTER UP DOWN
MENU
3.1 DISPLAY BEDIENUNG
3 Einstellen am Displaymenü
MENU
ENTER
Weiter zum nächsten Menü.
Auswahl des aktuellen Punktes.
Scrollen durch das Menü oder erhöhen
von Werten.
Scrollen durch das Menü oder senken
von Werten.
KEY OFF
ON
MENU
CAL1 WT.01 W(0-255)
WT.02 C(0-255)
Wt05
MENU
ZOOM POS1
POS2
Z.(0~255)
Z.(0~255)
MENU
3.10 ZOOM RANGE
¡ Select the¡ZOOM¡range.¡POS1¡&¡POS2¡set the small position for
thezoom function.Note that when using DMX to control the fixture, the user
will only be able to access upto the set ZOOM position.It is not possible to
adjust beyond the set position.
¡ Enter the ¡CAL1¡to select white color of different color temperature.
¡ There are 5 pre-programmed White colors can be edited by using
¡Warm white¡ & ¡Cool white¡.
3.8 WHITES CALIBRATION
3.9 ACTIVATE THE PASSWORD
¡ Enter the¡KEY¡mode to select whether the access password is on or off.
¡ When the fixture is set as PASS ¡ON¡, after 30 seconds or turn on the fixture
next time, the fixture will need an access password to enter the display menu
control.
Note: The factory access password is¡UP¡+¡DOWN¡+¡UP¡+¡DOWN¡,
then press ¡ENTER¡to confirm the access.
