EXP PRO EXP48PRO Manual de usuario
EXP PRO Batteries
Hand-held Power
EXP48PRO & EXP96PRO
User Manual
Power to Explore
www.EXPPROPOWER.com
Table of Contents
General Battery information
1. Introduction
2. Appliance Description
3. Contents
4. How to Charge Your Battery
5. Other Information About Charging Your Battery
6. Charging Your Battery with the Optional 30 Watt Solar Panel
7. Capacity/Specifications
8. Powering From the DC Output Port
9. Pass-Through Technology
10. Parallel Connecting Batteries (Daisy Chaining)
11. Operating the White Light/Emergency Amber Flashing Light
12. Battery Management System (BMS)
13. Airline Travel
14. Battery Storage
15. Safe Use of Lithium Batteries
16. FAQs
CPAP User Information
17. Powering your PAP Machine from the DC Output Port
(Recommended)
18. PAP Machine DC Power Cords
19. Powering Your PAP Machine from the AC Output Port (Using a
Pure Sine Inverter)
20. PAP Machine Runtimes
21. Notes
Warranty Information
22. Limited Warranty
1. Introduction
Thank you for purchasing an EXP PRO Battery. This instruction
manual contains important information about usage and safety. Use
the product as described and keep this manual for future reference.
Before reading through the manual, you can begin to charge up
your EXP PRO Battery by connecting it to the AC power supply cord
provided and plugging into a wall socket.
2. Appliance Description
*Please note the EXP96PRO Battery has 2 DC Output Ports
3. Contents
●EXP48PRO or EXP96PRO Battery
●Protective Sleeve for Battery
●AC Charger: Input 110V-240V / Output 15V@2A (2000mA)
●DC Charger: Input 12V-24V / Output 15V@2A (2000mA)
●User Manual
4. How to Charge Your Battery
A. Select the method of charging. AC (plugs into the wall)
and DC (plugs into the car) cords are both included.
B. Plug the charging cable into the charging input port
located on the battery and the other end into the
appropriate power source.
C. Charging will begin automatically.
D. Battery is fully charged when all power indicator lights
have been solidly lit for at least 30 minutes.
5. Other Information About Charging Your Battery
•Never leave the battery unattended for long periods of time
while charging.
●Do not charge below 32°F. Optimum ambient charge
temperature is 40°F - 110°F.
●Do not charge the battery if the charge cord or battery has
obvious damage or if the battery appears to be bulging. A
bulging battery is a potential sign of damaged lithium cells.
●Do not charge the battery if it feels excessively hot. The
battery should not reach more than 120°F while charging or
discharging and should not feel hotter than a warm cup of
coffee to the touch.
6. Charging Your Battery with the Optional 30 Watt
Solar Panel
The EXP PRO 30 Watt Solar panel is designed to be a genuinely
portable charging solution for the EXP48PRO and EXP96PRO
Battery line. It is soft and foldable, allowing it to easily fit in most
backpacks to take with you on your outdoor adventures. The panel
will provide up to 18V @ 1.5A. It is ideally suited for outdoor life
and the unexpected power outage.
A. Open the solar panel and place it on a clean, dry, and
flat surface in direct sunlight.
B. Plug the solar charge cord into the Type-C Input/Output
Port on the battery using the included USB-C to 2.1mm
adapter.
C. Charging will begin automatically.
D. Expect longer charge times using the solar panel
compared to the AC or DC charge cords as sun
conditions will vary greatly.
7. Capacity/Specifications
Full capacity and specification information can also be found on the
back of each battery.
●DC Output Port: DC12V@10A Continuous / 15A Peak (5Min)
●Type C Input: DC5V@3A / 9V@3A / 15V@3A / [email protected]
●Type C Output: DC5V@3A / 9V@3A / 12V@3A / 15V@3A / 20.3V@3A
●USB Output 1: DC5V@2.4A
●USB Output 2: DC3.6V-6.5V@3A / 6.5V-9V@2A / [email protected]
EXP48PRO: 153.6-Watt Hours (Wh) / 12.8 Amp Hours
(Ah)
@ 12V / 48,000 Milli Amp Hours (mAh) @ 3.2V.
EXP96PRO: 307.2-Watt Hours (Wh) / 25.6 Amp Hours
(Ah)
@ 12V / 96,000 Milli Amp Hours (mAh) @ 3.2V.
8. Powering From the DC Output Port
A. Plug your device into the main round power port
ensuring a secure fit, using a 12V cigarette style plug that
is meant to power your device.
B. The port(s) will automatically turn on and provide power
to the connected device.
C. To turn off the device, simply unplug it from the power
port.
9. Pass-Through Technology
The EXP48PRO and EXP96PRO are equipped with “Pass Through”
technology. This allows you to charge devices connected to the
battery while the battery is being charged. The battery will
automatically detect a power outage and switch to battery power.
Please note that to get the most life out of your EXP PRO battery,
we suggest only using this option if there is a concern about a
power outage.
10. Parallel Connecting Batteries (Daisy
Chaining)
You can parallel connect no more than two batteries by plugging in
the provided DC charge cord to the charge port on one battery and
the main power port marked 12V/15A on the other battery in order
to double the available capacity.
11. Operating the White Light/Emergency Amber
Flashing Light
White Light: Press and hold the power button to turn on. Press
and hold the power button, again, to turn off.
Emergency Amber Flashing: Quickly press the power button
twice to turn on. Quickly press the power button twice, again, to
turn off.
12. Battery Management System (BMS)
The EXP PRO batteries contain a built-in BMS that controls
balanced charging and discharging of the individual Lithium cells
contained within. It also provides protection from:
●Over-Charging
●Over-Discharging
●Over-Current
●Over-Temperature
●Short Circuit
If the BMS has been tripped to protect the lithium cells and has
shut down the battery, simply plug in the AC charge cord as if
charging and the BMS will reset itself and resume normal operation.
13. Airline Travel
EXP48PRO:
Up to two of the EXP48PRO batteries can be brought with you in
your carry-on luggage. While the FAA regulations state the limit
is 160 watts, and the EXP48PRO only contains 154 watts per
battery, ultimately the final decision rests with the TSA officer on
whether an item is allowed through the checkpoint.
EXP96PRO:
The EXP96PRO contains 307 watts per battery and does not
meet FAA regulations for airline travel.
Please check current FAA regulations and the individual airline rules
prior to airline travel. Do not put EXP PRO Batteries or any other
lithium batteries or devices containing lithium batteries in checked
baggage of any type. If allowed by FAA regulations and individual
airline rules only take in carry-on baggage. Current FAA regulations
can be found on their website at www.faa.gov (search “Pack Safe
Lithium Batteries”). The major airlines list rules for lithium batteries
on their websites.
14. Battery Storage
Your battery is initially packed at roughly 50% charge. It Is best
practice to fully charge your battery before the first use. For
storage greater than 3 months, the general rule is to store at 40-
50% of capacity. We have provided a “Notes” section for you to
keep track of your battery maintenance.
15. Safe Use of Lithium Batteries
●Never expose the battery to liquids, especially saltwater. This
can cause internal corrosion and damage to the lithium cells
and/or the BMS, causing them to malfunction.
●Never drop the battery. This can damage the lithium cells, or
more likely the BMS, causing them to malfunction.
●Never operate the battery in direct sunlight. This is hard on
the BMS electrical components and the lithium cells.
Prolonged use in direct sunlight can damage the battery.
16. FAQs
How long will it take to charge my battery?
EXP48PRO: Approximately 6.5 hours ± @ 2A.
EXP96PRO: Approximately 13.0 Hours ± @ 2A.
Can I use an inverter?
An inverter can be used with EXP PRO Batteries. Please note
Otros manuales para EXP48PRO
1
Este manual sirve para los siguientes modelos
1
Tabla de contenidos
Otros manuales de Accesorios para cámaras de EXP PRO
