6
Information english
Operating, safety, and servicing instructions
Please read this operating, safety, and servicing instructions carefully before using
the pipe saw. Also store this instruction book somewhere accessible to everyone
using the pipe saw. In addition to these instructions, always follow the of¿cial work,
health and safety regulations. The Exact PipeCut is meant for professional use only.
Technical data
Pipecut V00
Voltage 220-240 V or 110-120 V / 50-60 Hz
Power 1010W
No-Load speed 4000 r/min
Intermittent operation S3 25% 10min (2,5 min ON /7,5 min OFF)
Blade diameter 155 mm
Mounting bore 65 mm
Weight 6,6 kg
Range of use Ø 75 mm –00 mm
Max. pipe wall steel 1,5 / 6 mm
Protection class
/ II
Spindle lock YES
Speed preselection NO
Constant electronic control NO
Overload Protection YES
Reduced starting current NO
Vibration emission value ah 2,2 m/s2
Uncertanity ofVibration emission value K 1,5 m/s2
LWA (sound power) 98 dB
LpA (sound pressure) 87 dB
LpC (highest peak of sound pressure) 101 dB
The values given are valid for nominal voltages [U] of 230/240V. For lower voltage and models for
speci¿c countries, these values can vary.
Please observe the article number on the type plate of your machine. The trade names of the
individual machines may vary. Only for power tools without reduced starting current: Starting cycles
generate brief voltage drops. Interference with other equipment/machines may occur in case of
unfavourable mains system conditions. Malfunctions are not to be expected for system impedances
below 0.36 ohm.
