Ewent EW7016 R1 Manual de usuario

EW7016 R1

USB 3.1 to IDE / SATA Converter

ENGLISH

EW7016 R1 - USB 3.1 to IDE / SATA Converter

Table of contents

1.0 Introduction ...........................................................................................................2

1.1 Functions and features......................................................................................2

1.2 Packing contents...............................................................................................3

2.0 Ports and indication LED’s.....................................................................................3

3.1 Installation of the EW7016 R1 ...............................................................................4

3.1 Windows 2000/XP/Vista/Windows 7/8 ...............................................................4

4.0 Connecting a hard disk or CD-ROM/DVD player....................................................4

4.1 Connecting an IDE hard disk or IDE CD-ROM/DVD player................................4

4.2 Connecting a SATA hard disk or SATA CD-ROM/DVD player ...........................5

4.3 Safely remove a USB device.............................................................................5

5.0 Preparing a hard disk for usage.............................................................................5

5.1 Preparing the hard disk for use with Windows 2000/XP/Vista............................5

5.2 Preparing the hard disk for use with Windows 7/8..............................................6

6.0 Backup function.....................................................................................................6

6.1 Installation of the PC Clone Ex software............................................................7

6.2 Using the backup software and make a backup.................................................7

6.2.1 Using the backup button of the EW7016 R1. .............................................. 7

6.2.2 Making a backup with the PC Clone EX software ....................................... 7

6.2.3 Restore a backup ....................................................................................... 7

7.0 Frequently Asked Questions and other related information....................................8

8.0 Service and support...............................................................................................8

9.0 Warning and points of attention.............................................................................9

10.0 Warranty conditions...........................................................................................10

1.0 Introduction

Congratulations with the purchase of this high-quality Ewent product! This product

has undergone extensive testing by Ewent’s technical experts. Should you

experience any problems with this product, you are covered by a five-year Ewent

warranty. Please keep this manual and the receipt in a safe place.

1.1 Functions and features

With the Ewent EW7016 R1 USB 3.1 to SATA/IDE Converter, you can easily connect

a hard disk, CD-ROM player, DVD-ROM player or burner to your computer. The ideal

solution if you do not want to open your case to mount a new device!

ENGLISH

The EW7016 R1 has a stylish black design which perfectly matches the desk of the

modern computer user. Thanks to it’s compact design, the EW7016 R1 is also very

suitable to be used when you are on the road.

The EW7016 R1 has a connector on each side of the device itself. Thanks to these

connections, the EW7016 R1 is compatible with almost all hard disks, CD-ROM

players and DVD players. The EW7016 R1 is also equipped with a super fast USB 3.1

port. Using USB 3.1, you can obtain 10 times the speeds of USB 2.0. Of course, the

EW7016 R1 is fully compliant with USB 2.0. This means the EW7016 R1 can be used

on computers which only have USB 2.0 ports.

The EW7016 R1 is supplied with a energy efficient power supply which is able to

power your devices.

1.2 Packing contents

The following parts need to be present in the packing:

•EW7016 R1 USB 3.1 to SATA/IDE converter

•USB 3.1 to mini USB 3.1 cable

•SATA cable

•SATA power cable

•IDE power cable

•Power supply

•Power converter

•CD-ROM with PC Clone EX software and manual

2.0 Ports and indication LED’s

(1)

2.5” IDE connector.

(2)

3.5” IDE connector.

(3)

SATA connector.

(4)

Mini USB port.

LED

Will be lit when the EW7016 R1 is

powered.

ENGLISH

3.1 Installation of the EW7016 R1

3.1 Windows 2000/XP/Vista/Windows 7/8

From Windows 2000 and up, Windows has built-in drivers for the EW7016 R1. When

using these Windows versions there is no need to install drivers. Windows will install

the correct driver(s) automatically the moment you connect the hardware. Refer to the

following chapter for detailed information how to connect the EW7016 R1.

4.0 Connecting a hard disk or CD-ROM/DVD

player

We recommend that you make a backup of the hard disk you wish to use. Ewent can

not be held responsible should any loss or damage of data occur resulting in the

installation or use of this device. Ewent advises you to disconnect the EW7016 R1

from your computer before connecting a hard disk, CD-ROM or DVD player.

4.1 Connecting an IDE hard disk or IDE CD-ROM/DVD

player

If you use an IDE hard device, you have to set the hard disk to ‘Master’. Refer to the

label on your hard disk or CD-ROM/DVD player for more information on these

settings.

1. Connect the power cable to the power converter.

2. Connect the IDE power cable to the power converter.

3. Connect the other side of the IDE power cable to the power connection of the

IDE disk or CD-ROM/DVD player (Molex).

4. Connect an IDE cable to the IDE hard disk or CD-ROM/DVD player.

5. If you are using a 2.5 inch IDE hard disk: Connect the other side of the IDE cable

to the 2,5 inch IDE connector of the EW7016 R1 (1.). In case you are using a 3.5

inch IDE hard disk: Connect the IDE cable to the 3.5 inch IDE connector of the

EM1016.

6. Connect the USB 3.1 cable to a free USB (3.1) port of your computer.

7. Connect the small plug of the USB 3.1 cable to the USB connection of the

EW7016 R1.

8. Connect the power adapter to a wall outlet.

9. The ‘Wizard New Hardware’ may appear. Should you see the following message:

‘Is Windows Allowed to make a connection to Windows Update to search for

software?’, select ‘No, not now’.

10. Click ‘Next’

11. Select ‘Install the software automatically (recommended)’.

12. Click ‘Next’ and follow the steps shown on screen.

ENGLISH

4.2 Connecting a SATA hard disk or SATA CD-ROM/DVD

player

1. Connect the power cable to the power converter.

2. Connect the SATA power cable to the power converter.

3. Connect the other end of the SATA power cable to the corresponding SATA

connector of the hard disk or CD-ROM/DVD player.

4. Connect the SATA cable to the corresponding SATA connector of the SATA hard

disk or CD-ROM/DVD player.

5. Connect the other side of the SATA cable to the SATA connection of the

EW7016 R1.

6. Connect the USB 3.1 cable to a free USB (3.1) port of the computer.

7. Connect the small plug of the USB (3.1) cable to the USB connection of the

EW7016 R1.

8. Connect the power supply to a wall outlet.

9. The ‘Wizard New Hardware’ may appear. Should you see the following message:

‘Is Windows Allowed to make a connection to Windows Update to search for

software?’, select ‘No, not now’.

10. Click ‘Next’.

11. Select ‘Install the software automatically (recommended)’.

12. Click ‘Next’ and follow the steps shown on screen.

4.3 Safely remove a USB device

Follow the instructions below to safely disconnect a device from the EW7016 R1.

1. Double-click the ‘Safely remove hardware’ icon in the taskbar, near the clock.

2. Select the EW7016 R1 (USB device for mass storage) and click ‘Stop’.

3. Click ‘OK’ to confirm.

4. Disconnect the hard disk, CD-ROM player or DVD-player from the EW7016 R1.

5.0 Preparing a hard disk for usage

When using a hard disk for the first time, you need to initialize the hard disk in order to

make the hard disk ‘visible’. Use the following steps to initialize the hard disk.

5.1 Preparing the hard disk for use with Windows

2000/XP/Vista

1. Right click the ‘My Computer’ icon.

2. Click ‘Manage’.

3. Select the option ‘Disk Management’ from the left side of the screen.

4. Right click the new hard disk and choose ‘Initialize’.

5. Click ‘Ok’.

6. Right click the new hard disk.

7. Click ‘New Partition’.

ENGLISH

8. Click ‘Next’.

9. Click ‘Next’.

10. Click ‘Next’.

11. Choose the desired partition format (Note: when using FAT32 the partition size is

limited to 32GB).

12. Click ‘Next’.

13. Select the drive letter you wish to assign to this partition (this is not required).

14. Click ‘Next’.

15. Select the desired file system: FAT32 or NTFS.

Note! If you only use the hard disk on Windows XP or Vista systems we recommend

you to select the NTFS file system.

16. Enter a name for the new partition in the field 'Volume label'

17. Enable the checkbox at ‘Quick format’.

18. Click ‘Next’.

19. Click ‘Finish’.

20. The hard disk is now ready to be used.

5.2 Preparing the hard disk for use with Windows 7/8

1. Click ‘Start’.

2. Click ‘Control Panel’.

3. Click ‘System and security’.

4. Click ‘Manage’.

5. Click ‘Disk Management’.

6. Right-click ‘New volume’.

7. Click ‘Next’.

8. The wizard ’New Volume’ appears,

9. Click ‘Next’.

10. Choose the desired partition format.

11. Click ‘Next’.

12. Select a drive letter at ‘Assign a drive letter’.

13. Click ‘Next’.

14. Choose the desired file system.

15. Click ‘Next’.

16. Click ‘Finish’.

17. The notification ‘New Volume found’ may appear’.

18. The hard disk is now ready to be used.

6.0 Backup function

The EW7016 R1 is equipped with a backup button. When using this button, you are

able to make a backup of the data. In order to use this function you have to install the

supplied PC Clone Lite software.

ENGLISH

6.1 Installation of the PC Clone Ex software

1. Place the installation disk in your CD-ROM player or DVD player. The installation

disk will start automatically.

2. Choose your language and click ‘Next’.

3. Choose ‘Install PC Clone EX software’.

4. Follow the steps shown on screen to complete the installation.

6.2 Using the backup software and make a backup

There are two methods to make a backup with the EW7016 R1. You can use the PC

Clone EX software to make a backup, or you can use the handy ‘Backup button’ of the

EW7016 R1 itself. During the following examples we will explain how you can use

these two methods.

6.2.1 Using the backup button of the EW7016 R1.

1. Press the ‘Backup’ button of the EW7016 R1 once.

2. The PC Clone EX software will be started.

3. Press the backup button again to start a backup.

4. The EW7016 R1 will now make a backup of your computer’s hard disk.

5. Click ‘OK’ to confirm the backup has finished.

6.2.2 Making a backup with the PC Clone EX software

1. Click ‘Start’.

2. Click ‘Programs’ or ’All programs’

3. Select ‘PC Clone EX’.

4. Click ‘PC Clone EX’. You may need to click the ‘PC Clone EX’ icon to start the

software.

5. Click the second icon in the menu tray (Backup).

6. Select the source at the top part of the screen. When selecting the first folder, all

the subfolders and directories available in this folder will be saved in a backup.

7. Select the destination at the bottom part of the screen.

8. Click at the bottom of the screen on the icon called ‘Backup’.

9. Click ‘Start’. The backup will now start.

10. Click ‘OK’ to confirm the backup has finished.

6.2.3 Restore a backup

You can also use the restore function of the PC Clone EX software. This function

actually is an incremental backup function. This is a very convenient function which

only saves the changed data. Because only the changed data will be saved, there is

no need to make a complete backup again and this can save a lot of time.

1. Click ‘Start’.

2. Click ‘Programs’ or ’All programs’.

3. Select ‘PC Clone EX’.

ENGLISH

4. Click ‘PC Clone EX’. You may need to click the ‘PC Clone EX’ icon to start the

software.

5. Click the third icon in the system tray (Restore).

6. Now, select the desired files and folders you want to restore at the top of the

screen, if not selected yet.

7. Select the destination at the bottom part of the screen.

8. Click the ‘Restore’ icon.

9. When finished, click ‘OK’ to confirm.

7.0 Frequently Asked Questions and other

related information

The latest Frequently asked questions for your product can be found on the support

page of your product. Ewent will update these pages frequently to assure you have

the most recent information. Visit www.ewent-online.com for more information about

your product.

8.0 Service and support

This user’s manual has been carefully written by Ewent’s technical experts. If you

have problems installing or using the product, please fill out the support form at the

website www.ewent-online.com/

You can also contact us by phone. Please check www.ewent-online.com/ for the

helpdesk phone number and opening hours.

ENGLISH

9.0 Warning and points of attention

Due to laws, directives and regulations set out by the European parliament, some

(wireless) devices could be subject to limitations concerning its use in certain

European member states. In certain European member states the use of such devices

could be prohibited. Contact your (local) government for more information about this

limitations.

Always follow up the instructions in the manual*, especially where it concerns devices

which need to be assembled.

Warning: In most cases this concerns an electronic device. Wrong/improper use may

lead to (severe) injuries!

Repairing of the device should be done by qualified Ewent staff. The warranty

immediately voids when products have undergone self repair and/or by misuse. For

extended warranty conditions, please visit our website at www.ewent-online.com.

*Tip: Ewent manuals are written with great care. However, due to new technological

developments it can happen that a printed manual does not longer contain the most

recent information.

If you are experiencing any problems with the printed manual or you cannot find what

you are looking for, please always check our website www.ewent-online.com first for

the newest updated manual.

Also, you will find frequently asked questions in the FAQ section. It is highly

recommended to consult the FAQ section. Very often the answer to your questions will

be found here.

ENGLISH

10.0 Warranty conditions

The five-year Ewent warranty applies to all Ewent products, unless mentioned

otherwise before or during the moment of purchase. After buying a second-hand

Ewent product the remaining period of warranty is measured from the moment of

purchase by the product’s initial owner. Ewent warranty applies to all Ewent products

and parts, indissolubly connected or mounted to the product it concerns. Power supply

adapters, batteries, antennas and all other products not directly integrated in or

connected to the main product or products of which, without reasonable doubt, can be

assumed that wear and tear during use will show a different pattern than the main

product, are not covered by the Ewent warranty. Products are not covered by the

Ewent warranty when exposed to incorrect/improper use, external influences or when

opening the service parts of the product by parties other than Ewent. Ewent may use

refurbished materials for repair or replacement of your defective product. Ewent

cannot be held responsible for changes in network settings by internet providers. We

cannot guarantee that the Ewent networking product will keep working when settings

are changed by the internet providers. Ewent cannot guarantee the working of web

services, apps and other third party content that is available through Ewent products.

Ewent products with an internal hard disk have a limited warranty period of two years

on the hard disk. Ewent could not be held responsible for any data lost. Please make

sure that if the product stores data on a hard drive or other memory source, you will

make a copy before you return the product for repair.

When my product gets defective

Should you encounter a product rendered defective for reasons other than described

above: Please contact your point of purchase for taking care of your defective product.

EW7016 R1 | 11-2015

Tabla de contenidos

Otros manuales de Convertidor de medios de Ewent

Ewent

Ewent EW7016 Manual de usuario

Ewent

Ewent EW1015 Manual de usuario

Ewent

Ewent EW3705 R2 Manual de usuario

Ewent

Ewent EW3707 Manual de usuario

Ewent

Ewent EW3706 Manual de usuario

Ewent

Ewent EM7016 Manual de usuario

Manuales populares de Convertidor de medios de otras marcas

SoundTraxx

SoundTraxx Blunami BLU-2200 Manual de usuario

SPROLINK

SPROLINK VA1 Manual de usuario

Acclaim Lighting

Acclaim Lighting DDC-1-AC Manual de usuario

Nikon

Nikon AF-S TC-20E III Manual de usuario

Axis

Axis AXIS Q7406 Manual de usuario

Omega

Omega TAC80B-J Manual de usuario

Zoom

Zoom Thunderbolt TAC-2R Manual de usuario

OST

OST iConverter 10/100M Manual de usuario

Vertiv

Vertiv Netsure Manual de usuario

birddog

birddog MINI Manual de usuario

Roland

Roland GI-10 Manual de usuario

Wallenstein

Wallenstein WX310 Manual de usuario

Pace

Pace MSS 200-1 Manual de usuario

Solar Converters

Solar Converters EQ 12/24-50 Manual de usuario

CYP

CYP EL-7400V Manual de usuario

TIE

TIE MIDI 1i1o Manual de usuario

DCS

DCS Vivaldi Upsampler Manual de usuario

Westermo

Westermo MCW-211 SERIES Manual de usuario