Evus DD-418R Manual de usuario

Warnings

Do not change the fuse on the power

cord without professional guidance. Using

an improper fuse may cause damage to

this unit or even cause re.

Please contact your nearest dealer if one

of the following is experienced:

(a) Water or other objects enter the unit.

(b) There is smoke.

To ensure safe driving, please adjust the

volume to a safe and comfortable level in

case of emergency situations.

Thank you for purchasing this product.

Please read through these operating

instructions so you will know how to

operate your model properly. Please keep

this manual in a safe place for future

reference.

Only connect the unit to a 12-volt power

supply with negative grounding.

Never install this unit where operating it

may impair safe driving conditions.

Never use the front video display function

when driving, so as to prevent violating

trafc regulations or causing an accident.

Never expose this unit, amplifier, and

speakers to moisture or water to prevent

electric sparks or re.

Precautions

1. Never disassemble or adjust the unit

without any professional guidance.

For details, please consult any professional

car shop / dealer for inquiry.

2. If the front panel or TFT monitor is dirty,

please use a clean silicone cloth and

neutral detergent to wipe off the spot. Using

a rough cloth and non-neutral detergent

such as alcohol for cleaning may result in

scratching or decoloration to the monitor.

3. If any abnormal behavior of the unit is

found, please refer to trouble shooting

guide of this manual. If no relevant

information is found, please press the

[RESET] key on the front panel to resume

factory default.

4. If you have parked the car in hot or cold

weather for a long time, please wait until

the temperature in the car becomes normal

before operating the unit.

5. Using the car heater in low temperature

environment may result in moisture inside

the unit, DO NOT use the unit in this

situation. Eject the disc and wipe off the

moisture on the disc. If the unit still doesn't

work after a few hours, please contact the

service center.

6. Do not impact the LCD monitor which could

cause damage.

7. To prevent damage to the screen, avoid

touching it with sharp objects.

8. To provide a clear demonstration and an

alternative for easy understanding to the

operation of this unit, graphic illustrations

are used.

However, some illustrations are different

from the actual images displayed on the

screen.

9. Operate the unit correctly according to this

manual to prevent unnecessary problem.

The guarantee won't be valid if the problem

is caused by inappropriate operation.

Contents

Before using................................................ 1

Front Panel............................................. 1

Basic operations......................................... 2

Power on / off......................................... 2

Parking Brake Inhibit.............................. 2

Mute ....................................................... 2

Audible Beep Conrmation .................... 2

Open Main Menu.................................... 2

All Source Menu..................................... 2

Volume adjustment................................. 2

EQ Menu................................................ 2

System reset .......................................... 2

Set Date /Time ....................................... 2

Radio mode................................................. 3

Select Radio as Playing Source............. 3

Tuner Menu ............................................ 3

Select One Radio Band.......................... 3

Tune ....................................................... 3

Preset Station......................................... 3

Local Seeking......................................... 4

EQ Selection .......................................... 4

Bluetooth mode .......................................... 5

Pairing Bluetooth Enabled Devices........ 5

Disconnecting a Bluetooth Device ......... 6

Making a Call ......................................... 6

Receiving a Call ..................................... 6

Adjust Bluetooth Settings....................... 7

Music Mode............................................ 7

Playback...................................................... 8

Load a Disc ............................................ 8

Eject the disc.......................................... 8

Touch screen controls ............................ 8

Controlling playback............................... 8

Connect an USB device......................... 8

Insert a MicroSD card ............................ 8

Play/Pause............................................. 8

Previous/Next......................................... 8

Search for a Folder ................................ 8

Repeat.................................................... 9

Repeat A-B............................................. 9

Shufe (Random) Play........................... 9

Select Audio Mode ................................. 9

Select Subtitle Language ....................... 9

Playback Information............................ 10

Direct Track Entry................................. 10

Rotate Pictures..................................... 10

Zoom .................................................... 10

Other modes ............................................. 12

Listen to other devices ......................... 12

Reset.................................................... 12

GPS...................................................... 12

Steering Wheel Control Programming . 12

Setup.......................................................... 13

Display system ..................................... 13

Adjust general settings......................... 13

Adjust video settings ............................ 14

Adjust clock settings............................. 14

Adjust sound settings........................... 14

Adjust Language Settings .................... 14

Adjust Bluetooth Settings..................... 15

Adjust DVD rating................................. 15

Adjust volume settings ......................... 15

EQ .............................................................. 16

Select preset equalizer......................... 16

Adjust EQ Parameters ......................... 16

About Evus Link....................................11

Evus Link.................................................. 11

Connect with Smartphones...................11

Adjust FAD BAL .................................. 16

DAB Digital Radio (optional).................17

Troubleshooting ....................................... 18

Device connections.................................. 19

Notes of connection ........................... 19

Parking brake cable connections ....... 20

Reverse driving cable connections ...... 20

Specications........................................... 21

Wiring diagram ......................................... 22

Before using

1. MicroSD card reader for map / media

2. Disc slot

3. Internal Microphone

4. [ ] Button

Press to eject a disc.

5. [ ] Power button

Press to turn the unit ON.

Press briey to activate the MUTE function. Press again to resume normal sound.

Press and hold to turn the unit OFF.

6. [ ] Button

Decrease the volume level.

7. [ ] Button

Enter main menu.

8. [ ] Button

Increarse the volume level.

9. Reset Hole

10.[NAVI]: Enter navigation mode.

Notice:

The graphics in this manual are for reference purposes only and

may differ somewhat from the actual unit.

Front Panel

MEDIAMAP

Basic operations

Power on / off

Press the [ ] button to turn the unit on. The

buttons on the front of the unit light up for a

moment and the current mode status appears

on the LCD. Press and hold the [ ] button

more than 2 seconds to power off the unit.

Parking Brake Inhibit

• When the “BRAKE” cable is connected to

the brake switch, the video playback will

be controlled by driving status, system

setup and input video sources.

• Parking brake function is overridden when

the video source is set to REVERSE.

• When the car is moving ahead, if video

is played, the screen appears WARNING

information and blank screen to prevent

the driver watching images.

Mute

When on, press the [ ] button on the front

panel shortly to mute the volume from the

unit.

To resume the volume, press the knob shortly

again.

Audible Beep Conrmation

An audible beep tone conrms each function

selection. The Beep tone can be disabled

through the Setting menu.

Open Main Menu

Press [ ] button on the front panel or touch

the [ ] icon on the top left of the screen to

open the Main Menu.

Use [ ] or [ ] to view the previous or

next page of playing sources.

Press [ ] button again to return to the

previous source.

All Source Menu

Use [ ] or [ ] to view the previous or

next page of playing sources, and then select

the source you desired.

Volume adjustment

Volume Increase/Decrease

To increase or decrease the volume level,

touch [ ] or [ ] button on the front panel.

The volume range is from "0" to "50". After

adjust, the TFT screen displays the volume

level for 3 seconds.

EQ Menu

The Audio Control feature allows you to

easily adjust your audio system to meet the

acoustical characteristics of your vehicle, which

vary depending on the type of vehicle and its

measurements. Proper setting of the Fader

and Balance boosts the effects of the cabin

equalizer.

To enter EQ setting menu, touch [ ](EQ)

icon on the bottom of source menu.

System reset

To correct a system halt or other illegal

operation, use the tip of a pen to press the

[RESET] key of the panel. After a system reset,

the unit restores all factory default settings.

Set Date /Time

1. Touch [ ](Setting) icon on the playing

source menu.

2. Touch [ Clock ].

The date/time setup menu is displayed.

Set Date

1. Touch [ Date ].

2. Touch the date information on the screen .

A submenu is displayed.

3. Touch [ ] or [ ] to set year, month and

day.

Set Clock Mode

1. Touch [Clock mode].

2. Touch [12Hr] or [24Hr] to switch clock

mode.

Set Time

1. Touch [ Time ].

2. Touch the time on the screen, a submenu is

displayed.

3. Touch [ ] or [ ] to set hour and minute.

Tip:

When date/time is set, touch [ Save ] to conrm

or [ Cancel ] to exit.

Radio mode

Select Radio as Playing Source

Touch [Radio] on the main source menu.

Tuner Menu

87 9 10 11

14 15 161312

1. Touch to view the SOURCE MENU.

2. To view all the stored stations

3. Preset stations list of current band

4. Clock

5. Current station frequency

6. Current radio band

7. Touch to view more buttons

8. Tune backward(short press)

Seek backward(long press, then short

press briey)

9. Search stations automatically

10. Tune forward(short press)

Seek forward(long press, then short press

briey)

11. Touch to change band

12. Hide the second line of control buttons.

13. Save the desired radio station

14. Touch to receive Local or Distant stations

15. Enter frequency directly

16. Touch to access Equalizer settings menu

Select One Radio Band

Touch the [ ] icon on the user interface

to select one radio band among FM1, FM2,

FM3, AM1 and AM2.

Tune

Auto Tuning

Press and hold [ ] / [ ] icon on the user

interface more than 1 second to seek a higher

/ lower station.

To stop searching, repeat the operation above

or press other keys having radio functions.

Note:

When a station is received, searching stops

and the station is played.

Manual Tuning

Method 1:

During manual tuning, the frequency will be

changed in steps.

Touch the [ ] / [ ] icon on the user

interface to tune in a higher / lower station.

Method 2:

1. Touch the numeric keypad icon [ ].

Numeric keyboard is displayed, touch

numbers to input frequency.

2. Touch [ ] to delete the input numbers

step by step.

3. Touch [ OK ] to enter.

Preset Station

The unit has 5 bands, such as FM1, FM2,

FM3, AM1, AM2, and each band can store 6

stations; hence the unit can store 30 stations

in total.

Search Stations Automatically

Touch [ ] to search and store 6 strongest

stations in current band automatically.

Manual Store

1. Tune to a station manually.

2. Touch [ ].

3. Touch one of the channels P1 to P6 to

save the select station.

Tune to a Preset Station

1. Touch [ ].

2. Select the desired band.

3. Touch one of the preset channels (P1 to

P6) on the screen.

Local Seeking

Touch the [ ] icon and choose the Radio

Local or Distance.

When the [ ] icon turns bright, only

stations with a strong signal strength will be

detected . Default is “Distance”.

EQ Selection

Press the [ ] icon to enter the EQ setup

menu.

(See “EQ” chapter for details.)

Radio mode

Bluetooth mode

Bluetooth technology has the capability

to wirelessly synchronize and transfer

data among devices. The Bluetooth audio

capabilities can be used for mobile phones

hands free applications. Bluetooth has many

proles and the unit is compatible with most

Bluetooth enabled mobile phones. Before

attempting to use the Bluetooth functions on

the unit, please make sure your mobile phone

supports Bluetooth functions.

Note:

The line-of-sight distance between this unit

and your mobile phone must be 8 feet (2.4

meters) or less for sending and receiving

voice and data via Bluetooth wireless

technology.

Please make sure your mobile phone

supports Bluetooth functions (Headset or

Handsfree profiles or both). Adhere to the

following guidelines for successful operation.

• Before using Bluetooth functions, you

must pair your mobile phone to the unit

(see “Pairing the Bluetooth System with

Your Mobile Phone and Unit”). To ensure

the best reception for pairing and re-

connection, please make sure the mobile

phone battery is fully charged before you

begin.

• Try to perform pairing within a few minutes

of the mobile phone being turned on.

• Once the unit has been paired with the

mobile phone, the unit’s Bluetooth model

number will be displayed on the mobile

phone.

• To achieve the best performance, always

keep the mobile phone within 10 feet (3

meters) of the unit.

• Always keep a clear path between the

mobile phone and the unit. Never place

a metal object or any other obstacle

between the mobile phone and the unit.

• Some mobile phones may have a “Power

Saving Mode” option. PLEASE DO NOT

use the power saving mode with the unit.

• Before accepting or making a call, make

sure your mobile phone’s “Bluetooth

function” is turned on.

• To ensure the best conversation quality/

performance, stay within 3 feet (1 meter)

of the units microphone when talking.

• To manually disconnect the mobile

phone from the unit, touch the “Chain

Link” icon on the Bluetooth user interface

(next to the mobile phone name) and the

Bluetooth device will be “disconnected”,

but still paired.

The user can make or receive phone calls

with Bluetooth enabled phones through the

unit. The user can also listen to music from a

Bluetooth enabled device.

Pairing Bluetooth Enabled

Devices

To connect your Bluetooth phone to the unit,

the user needs to pair the phone to the unit.

Pairing needs only to be done once. The

user can pair up to ve phones. The user can

search for Bluetooth head units by mobile

phone.

1. Turn ON the Bluetooth function of the car

device.

2. Search for Bluetooth devices by mobile

phone.

3. Select the Bluetooth device ID in the

pairing list.

4. Enter the password displayed on the right

of the screen.

Notes:

• Theoperationalrangebetweenthisunit

and a Bluetooth device is approximately 5

meters.

• Beforeyouconnect aBluetoothdevice

to this unit, familiarize yourself with the

Bluetooth capabilities of the device.

• CompatibilitywithallBluetoothdeviceis

not guaranteed.

• Anyobstaclebetweenthisunitand

a Bluetooth device can reduce the

operational range.

• Keepthisunitawayfromanyother

electronic device that may cause

interference.

Bluetooth mode

Disconnecting a Bluetooth

Device

To disconnect one device, touch [Disconnect]

icon. After "Disconnect"

, the radio will display

a screen listing paired devices. Pressing the

Green "Plug" icon will reconnect a previously

paired phone to the BT radio. Pressing the

"Wastebin" icon next to a device's name will

unpair the phone from the radio.

Notes:

•Thedevicewillbedisconnectedwhenthe

device is moved beyond the operational

range.

•Ifyouwanttoreconnectthedevicetothe

unit, place it within the operational range.

•Ifyoudonotwanttoreconnectthedevice

to the unit automatically, touch [Options],

thenset[Autoconnect]to[OFF].Fordetails,

seethe“AdjustBluetoothSettings”section.

Making a Call

1. Select Bluetooth function in the home

menu.

2. On Option page, see the "Phone Synch"

item, and press "Synch" to synchronize the

phone book with the BT. If you have many

contacts, this may take up to 3-4 minutes.

3. Search for phone number from [Phone

Book] or [Call Log].

Or touch the number pad directly to input the

numbers, then touch the green icon [ ] to

dial.

Receiving a Call

1. If there is an incoming call, the screen will

display “Incoming...”.

2. Touch the screen to select [ ](hang up)

or [ ](Answer). Speak into the Bluetooth

microphone.

Tip

• You can select to receive calls automatically

by setting [Auto answer] to [On].

Bluetooth mode

Adjust Bluetooth Settings

1. In Bluetooth menu, touch [ Options ].

The option menu is displayed.

2. Touch on the selected option to change

the setting.

• [Bluetooth]:

To turn the “Bluetooth” function ON or

OFF.

• [Auto connect]:

To turn the “Auto Connect” function ON or

OFF .

• [Auto answer]:

To turn the “Auto Answer” function ON or

OFF .

• [Pin code]:

To setup the pairing code.

• [Phone sync]:

To synchronize phone book, touch [ Sync ]

on the sub-menu Phonebook Synch may

take several minutes.

Note:

•YoucanalsoadjustBluetoothsettingsin

the“Settings”menu.

Music Mode

1. Pair your mobile phone to the unit.

2. Touch [Bluetooth Audio] on the main

menu.

3. Touch the [ ] to start playback.

Touch [ ] / [ ] to select track.

A2DP

A2DP is short for Advanced Audio Distribution

Profile. The mobile phones supporting this

function can transmit stereo audio, whereas

the ones not supporting this function can

transmit mono audio only.

AVRCP

AVRCP is short for Audio/Video Remote

Control Prole. The mobile phones supporting

this function can control the playback of a

Bluetooth audio player.

In the mode of the music player working, if

you want to make a phone call, you can press

the number keys on the mobile phone.

At the same time the music player will stop.

The TFT screen will display “Calling”, after

the call received, the voice will be transferred

to the unit. When the call ends, the screen will

display music playing menu.

If there is an incoming phone call, the music

player will stop, and the screen will display

“Incoming”. When the call ends, the screen

will display music playing menu.

Tabla de contenidos

Manuales populares de Sistema de vídeo para coche de otras marcas

Stinger

Stinger HEIGH10 RB10RAM13B Manual de usuario

Eonon

Eonon E1057 Manual de usuario

Milion

Milion D2223 Manual de usuario

Metra Electronics

Metra Electronics 99-8153 Manual de usuario

Voxx Electronics

Voxx Electronics HR8MA1 Manual de usuario

Axxera

Axxera AV604Bi Manual de usuario

Clarion

Clarion NX706E Manual de usuario

Pyle view

Pyle view PLDN74BTi Manual de usuario

Clarion

Clarion NX602 Manual de usuario

PowerAcoustik

PowerAcoustik PTID-5850N Manual de usuario

RCA

RCA DRC6296 - Twin 9" Mobile DVD System Guía del usuario

Lanzar

Lanzar SVDVD5 Manual de usuario

Kia

Kia MTXM100YPPE Manual de usuario

Eonon

Eonon E1060 Manual de usuario

Macrom

Macrom M-AN900 Manual de usuario

Hyundai

Hyundai BAPE-L3000N Manual de usuario

r.LiNK

r.LiNK RL2-UCON8-SM Manual de usuario

Blaupunkt

Blaupunkt DVP 01C Manual de usuario