3840-001 User Manual February 22, 2018
Important Notes
Safety and Compliance
This document provides instructions describing the usage of the Model 3840-001 Electrician EVSE Tester. This device
simulates an electric vehicle for the purpose of verifying proper installation and operation of Electric Vehicle Support
Equipment (EVSE) charging stations. This product is intended for use by licensed electrical/installation professionals who
should review this manual carefully prior to use of the product. Under no circumstances will compliance with the
information in this manual relieve the user of responsibility to comply with all applicable codes or safety standards. This
document describes the most commonly-used operation scenarios. If situations arise in which it is not possible to follow
the procedures provided in this document, contact Control Module Inc., EVSE LLC. Control Module Inc., EVSE LLC, is not
responsible for any damages that may occur resulting from failure to follow the procedures described in this document.
Limitation of Liability
IN NO EVENT SHALL CONTROL MODULE INC, EVSE LLC, OR ITS AUTHORIZED DISTRIBUTORS BE LIABLE FOR
ANY INDIRECT, INCIDENTAL, SPECIAL, PUNITIVE, OR CONSEQUENTIAL DAMAGES, INCLUDING WITHOUT
LIMITATION, LOST PROFITS, LOST DATA, LOSS OF USE, COST OF COVER, OR LOSS OR DAMAGE TO THE
CHARGING STATION UNDER TEST OR ELECTRICIAN EVSE TESTER, ARISING OUT OF OR RELATING TO THE
USE OR INABILITY TO USE THIS MANUAL, EVEN IF CONTROL MODULE INC, EVSE LLC, OR ITS AUTHORIZED
DISTRIBUTORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES.
FCC Compliance Statement
Note: This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15
of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the
equipment is operated in a commercial environment. This equipment generates, uses and can radiate radio frequency
energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio
communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the
user will be required to correct the interference at his own expense.
Important
Changes or modifications to this product not authorized by Control Module Inc, EVSE LLC, could affect the EMC
compliance and revoke your authority to operate this product.
No Accuracy Guarantee
Reasonable effort was made to ensure that the specifications and other information contained in this manual are accurate
and complete at the time of publication. The specifications and other information in this manual, however, are subject to
change at any time and without prior notice.
Copyright and Trademarks
Copyright 2015 Control Module Inc., EVSE LLC. All rights reserved. This material is protected by the copyright laws of
the United States and other countries. It may not be modified, reproduced or distributed without the prior, express written
consent of Control Module Inc., EVSE LLC.
Watt Point is a U. S. registered trademark and service mark of Control Module Inc., EVSE LLC. All other products or
services mentioned have the trademarks, service marks, registered trademarks or registered service marks of their
respective owners. Control Module Inc., EVSE LLC, has filed several patent applications.
Instructions Pertaining To Risk of Fire or Electrical Shock
The following is a summary of safety concerns relevant to the installation and use of the Model 3840-001
Electrician EVSE Tester. Failure to follow these safety instructions may lead to serious injury, death and/or
damage to the equipment.
