The Fusion III has taken those comments made by our customers and develops them into the New
Fusion package. These comments along with hours of testing and development we have
improved the strength, durability and overall performance of the model. For those who owned the
original Fusion II you will note the changes, some of them are only minor, such as the length of Tail
moment. Other major developments such as the wing section, full length rudder and wing tip
fences take the Fusion III to the next level of Fun Fly design. We listen to our customers to improve
our products, so if you have anything you wish to share, please let us know.
The Evolution Fusion has been designed predominantly for the Fun Fly enthusiast and based on
competition flying. The Fusion III as its predecessors will loop on the spot, roll in the blink of an eye
and inspire confidence as it remains rock solid and stable. This model that has been designed to
be highly manoeuvrable, but also to be attractive with style and flair.
The laser cut parts simply slot together to provide a lightweight structure without compromising
strength. The Fusion is simple and satisfying to build for the amateur and experienced builder.
Each kit contains a comprehensive hardware pack that includes metal clevises, closed loop
systems, hinges, hatch latch, and horns to name but a few.
The Evolution Fusion has been designed to meet the needs of the Fun Fly competition pilot in an
attractive package. We hope that you have as much fun building and flying it as we have had
developing it further!
Building Recommendations
Check all parts from the box to ensure that they are present, if not then please contact us at the e-
mail address at the back of the instructions. We do from time to time make mistakes!!
Ensure that you use a completely flat base on which to build the model, this should be large
enough the build the wing 50” (1270mm) x 16” (400mm) as a minimum.
Read through the instructions before starting to build, understand each step before applying glue.
The glue detailed in the instructions is for a guide only, this is what we used for the prototypes, it is at
the builder discretion which glue is used but ensure that it is suitable for the intended purpose.
Always read the application instructions to ensure you achieve a strong joint. Depron is a foam
material; Standard Cyano will attack and melt it, always use foam safe glue or wood glue. Always
read the safety instructions supplied with the glue.
Balsa is a hardwood and you should make yourself aware of the precautions required when
handling and shaping this type of wood. Always wear an appropriate mask and work away from
others or use a suitable extraction system.
Take your time building the model, build a straight and strong model, this will ensure the model will
fly well!
