EVOC PPC-1261 Manual de usuario
特种计算机
Embedded Computer
产品说明书
User Manual
PPC-1261
12.1″平板电脑
12.1″Panel PC
Version: C04
Legal Information
Warnings
Please pay attention ps within the manual void personal injury or
property losses. The tips for personal injury are indicated in warning triangles while
the tips only related to triangles. The warning tips are
listed as follows with m severe to slight.
to the ti so as to a
property losses have no warning
the hazardous scale fro
Danger
If handled carelessly, death or severe human injury will occur.
Warning
If handled carelessly, death or severe human injury might occur.
Caution
Warning triangle indi mcates that slight human injury ight occur if handled carelessly.
Note
Unexpected result or s , if not handltatus might occur ed according to the tips.
Professional Personnel
The product/system cov o
professional personnel. During operation, please
manuals, especially the safety warnings. The profess ave been trained
experiences; therefore, he/she could be aware of the risks of the
stem and avoid possible damages.
EVOC Product
Please pay attention to the following instructions:
ered by the manual can nly be handled by qualified and
follow the respective instructive
ional personnel h
and possess relevant
product/sy
Warning
EVOC product can
including the contents and
grant from EVOC fi
debugging, op
only be used according to the
the relevant technical do
components from oth required, please get the recommendation and
rst. Proper transportation, st
eration and maintenance are prerequ d
normal operation; therefore, please ensure permitted environment conditions and pay
attention to the tips within the manual.
descriptions within the manual,
cuments. If the products or
orage, assembly, installation,
isite to ensure product safety an
er companies are
Copyright Notice
Information offered in this manual is believed to be correct at the time of printing, and
is subject to change without prior notice in order to improve reliability, design and
function and does not represent a commitment on the part of the manufacturer. In no
event will the manufacturer be liable for direct, indirect, special, incidental, or
consequential damages arising out of improper installation and/or use, or inability to
use the product or documentation.
This user manual is protected by copyright. No part of this manual may be reproduced,
stored in any retrieval system, or transmitted, in any form or by any means,
mechanical, electronic, photocopied, recorded or otherwise, without the prior written
permission from the manufacturer.
Trademarks
EVOC is a registered trademark of EVOC Intelligent Technology Co., Ltd. Other
product names mentioned herein are used for identification purposes only and may be
trademark and/or registered trademarks of their respective companies.
Warranty Terms:
The warranty on the product lasts for one year. If the user has additional requirements,
the contract signed between the two sides shall prevail.
Please visit our website: http://www.evoc.com for more information,
Hotline: 4008809666
About this manual
Scope of the Manual
The manual is appropriate for EVOC PPC-1261.
Convention
The term “the PC” or “the Product” within the manual usually stands for EVOC
s
Safety instructions
ty losses or individual injury, please pay attention to the safety
arning triangle
PPC-1261.
Instruction
To avoid proper
instructions within the manual. The warnings within the manual are marked with
w, whose existence is dependent upon the scale of the
potential hazard.
Contents
1. Product Introduction .................................................................................................1
Examination......................................................5
ing Arm Mounting................................................7
3.2 Outer Appearance and Dimensions................................................................8
llation Dimensions .................................................................................9
3.3.1 Installation Dimensions ..............................................................................9
....................10
unding ......................................................................................10
4.3 Connecting the Device to Power .................................................................11
.........................................12
5.2 Ports for External Control............................................................................13
Port Definition................................................................................13
..............13
......................15
orts........................................................................................15
5.3.5 Network Ports..................................................................................16
5.3.6 PS/2 Keyboard/Mouse Port .............................................................16
5.3.5 VGA Port.........................................................................................17
5.3.6 Audio Port .......................................................................................17
1.1 Overview .......................................................................................................1
1.2 Product Specifications ...................................................................................1
2. Application Scheme ..................................................................................................4
2.1 Transportation................................................................................................4
2.2 Storage...........................................................................................................4
2.3 Opening the Box and Initial
3. Installation ................................................................................................................6
3.1 Mounting Method..........................................................................................6
3.1.1 Embedded Panel Snap-fit Mounting...........................................................6
3.1.2 VESA Standard Support
3.3 Insta
3.3.2 Dimensions Drawing for Hole Drilling ......................................................9
4. Device Connection..................................................................................................10
4.1 Notices before Connection ......................................................
4.2 Product Gro
5. Instructions .............................................................................................................12
5.1 Product Outline...................................................
5.3 Product
5.3.1 Standard DB9 COM ports .................................................
5.3.2 CAN Port Controller Address Setting..............................................14
5.3.3 COM Port Mode Selection ........................................
5.3.4 USB P
Connector .............................................................................17
5.4 Operation Control........................................................................................18
6. A ce ....................................................................................19
.............................................19
6.2 Removal and Installation of the Motherboard .............................................20
g the Motherboard .......................................................................20
l and Installation of HDD ...............................................................22
7. EVOC One-Button-Recovery Operating Instructions.............................................24
e-Button-Recovery Operating Instructions..................................24
r Anti-virus Function ............................................................28
8. Appendix.................................................................................................................29
5.3.7 Power
ssembly and Maintenan
6.1 Overall Assembly ...........................................
6.2.1 Installin
6.2.2 Removal of the Motherboard....................................................................21
6.3 Remova
7.1 EVOC On
7.2 Instructions fo
8.1 Troubleshooting and Solutions ....................................................................29
Product Introduction
PPC-1261 - 1 -
1. Product Introduction
1.1 Ove
panel
PPC-
mem
PC p
(optional).
1024
and
One-Button-Recover
Deplo
rear m
solar
maki
1.2 Pr
rview
PPC-1261 is a 12.1″low power consumption and fanless industrial panel PC. Its front
is shaped by al-alloy and its al-alloy rear panel also serves as the heat sink.
1261 contains Intel® ATOM N455 + ICH8M chipset, Intel® low power
consumption ATOM N455 CPU (clock speed: 1.66GHz) on-board; 1G DDR3
ory and additional 1G DDR3 memory ICs on the expansion card, up to 2GB. The
rovides five USB ports, four serial ports, touch screen or tempered glass
The LCD screen can be 800x600 LCD screen with common backlight or
x768 LCD screen with LED backlight. The product features fully-sealed, fanless
super-slim design. As for software, this product supports EVOC
y, EVOC MBR anti-virus and EVOC BPI functions.
ying modular design, the product is composed of a front screen module and a
otherboard module. It is ideally suitable for such industries as rubber machinery,
energy photovoltaic and common industrial automation industries (such as paper
ng and environment protection).
oduct Specifications
Item Definition
Microprocessor Intel® ATOM N455 1.66GH
Chipset Intel® ATOM N455+ Intel®ICH8M
Memory Onboard 1GB or 2GB/DDR3/800MHz memory
Main Functional Index
Display 18bit; VGA (DB15) supports hot swap; VGA, LVDS are
Supports VGA, LVDS display; LVDS is single-channel
synchronous output.
Product Introduction
- 2 - PPC-1261
Network 2 x 10/100/1000Mbps LAN port, LAN1 supports
Wake-On-LAN
Audio HD standard, supporting MIC-IN/LINE-IN/LINE-OUT
LCD Screen
Features
Viewing angle (CR≥10)
LCD: 12″TFT LCD
Resolution: 800X600 (1024X768 optional)
Luminance: 400cd/m2
Contrast ratio: 600: 1
Horizontal: 70°～70°; Vertical: 50°～60°
Touch Screen
Port type: USB
Type: 5-wire resistive
External IO
Ports
Up to six COM ports (no CAN port); all the COM
ports are RS-232 mode by default; COM1~COM4
support RS-232/RS-422/RS-485 modes;
4 x USB2.0 port;
2 x LAN port;
2 x CAN port (optional), CAN port optical-electrical
isolation;
1 x PS/2 keyboard, 1 x mouse port;
1 x VGA port;
1 x LINE-IN, 1 x LINE-OUT, 1 x SPEAKER-IN
Dimensions 320mm (L) x 242mm (W) x 70.6mm (H);
Weight 5 Kg;
Main Performance Index
Temperature
Operating temperature: -10℃～50℃
Extendable Operating Temperature: -30℃～70℃
Storage temperature: -20℃～60℃
Extendable Storage Temperature: -40℃～85℃
Operating Wet & Humidity: 40℃, 95% RH.
Product Introduction
PPC-1261 - 3 -
Humidity 5 %～95% (non-condensing)
EMC
GB9254-2008, class A;
Limits of immunity are compliant with the thresh
Limits of radio disturbance are compliant with
old
of GB/T 17618-1998.
Reliability
MTBF≥10000h
MTTR≤0.5h
Safety Meets basic requirements of GB4943.
Protection
Grade
Screen surface complies with IP65 grade.
Mechanical
and
Environmental
Adaptability
Anti-shock: 15g/11ms. Half-sine wave, three times
for each of the three axes.
Anti-vibration: 5-19Hz/1.0mm amplitude;
19-200Hz/1.0g, three axes.
Power
Features Power consump
Input voltage/current: 9～30VDC/3.5～1A;
Power consumption of
the PC: 18W (standby);
tion of the PC: 28.7W (burnintest
100%).
Software
Function
overy function (please refer
etailed information);
refer to
d
CD).
EVOC One-Button-Rec
to Chapter 7 of the manual for d
EVOC MBR anti-virus function (please
Chapter 7 of the manual for detailed information);
EVOC BPI function (please refer to the motherboar
user manual in the
Application Scheme
- 4 - PPC-1261
2. Applic hemation Sc e
2.1 Transport
Well-packaged products are suited for transportation by truck, ship, and plane. During
transportation, products During
transship without protection from the
atmospher rted together with inflammable,
explosive and corrosive be exposed to rain, snow
and liquid substances an
2.2 Storage
Products should
temperature should be 0°C
the warehouse, there should oducts, and
corrosive hanical vibration, shock and strong
magnetic fie
and 50cm away from indow and air inlet.
Caution!
ation
should not be put in open cabin or carriage.
ping, products
ic condition
should not be stored in open air
s. Products should not be transpo
substances and are not allowed to
d mechanical force.
be stored in package box when it is not used. And warehouse
~ 40°C, and relative humidity should be 20% ~ 85%. In
be no harmful gas, inflammable, explosive pr
chemical pro
ld inter
ducts, and strong mec
ference. The package box should be at least 10cm above ground,
wall, thermal source, w
Risk of destroying the device!
When shippin
tempera n. re no water
on ) is on the surface or interior of the device. If
densation is formed on the device, please wait for over twelve hours before
necting the
g the PC in cold weather, please pay attention to the extreme
ture variatio Under this circumstance, please make su
drop (c
con
con
densation formed
device.
Tabla de contenidos
Otros manuales de Panel táctil de EVOC
Manuales populares de Panel táctil de otras marcas
IBASE Technology
IBASE Technology ASTUT-152-RE1S Manual de usuario
YASKAWA
YASKAWA TP 610C Manual de usuario
B&R
B&R Power Panel C Series Manual de usuario
Beijer Electronics
Beijer Electronics X2 control Manual de usuario
AXIOMTEK
AXIOMTEK GOT321W-521 Manual de usuario
TRIDONIC.ATCO
TRIDONIC.ATCO x-touchBOX Manual de usuario
