EVOC EC3-1813 Series Manual de usuario
EC3-1813 SERIES
基于 Intel Luna Pier 平台 3.5 寸主板
3.5 ″Motherboard Based on Intel Luna Pier
Platform
Version:C00
Announcement
What contained in this User Manual does not represent the commitments of EVOC
Company. EVOC Company reserves the right to revise this User Manual, without
prior notice, and will not be held liable for any direct, indirect, intended or unintended
losses and/or hidden dangers due to installation or improper operation.
Before purchasing, please have a detailed understanding of the product performance
to see whether it meets your requirement.
EVOC is a registered trademark of EVOC Intelligent Technology Co., Ltd. All
trademarks used in this User’s Manual are the property of their respective owners.
EVOC Intelligent Technology Co., Ltd. ©2010, Copyright Reserved. No part of this
manual may be reproduced in any form or by any means, such as in electronic or
mechanical way, without permission from EVOC.
Please visit our website: http://www.evoc.com for more information,
Or please send to the Technical Support Mailbox support@evoc.com or
Safety Instructions
1. Before handling the product, please read the user’s manual carefully;
2. Any board or card not ready to be installed shall be kept in the anti-static
packaging;
3. Before taking board or card from anti-static packaging, put your hand on
grounded metal object for a while (about 10 seconds) to eliminate static on your
body;
4. While holding a board or card, please do wear static protective gloves; always
hold a board by its edges;
5. Before inserting, removing or re-configuring motherboard or expansion card,
first disconnect the computer and peripherals from their power sources to
prevent electric shock to human bodies or damage to product;
6. Before removing boards or the box PC, disconnect the AC power cord from
power source;
7. For box PC products, when inserting or removing boards, disconnect the
computer and peripherals from the power sources firstly;
8. Before connecting or unplugging any equipment, make sure all power cords are
unplugged in advance;
9. To avoid unnecessary damage caused by turning on/off computer frequently,
wait at least 30 seconds before re-turning on the computer.
Table of Contents
Chapter 1 Product Introduction.....................................................................................1
Overview..................................................................................................................1
Mechanical Dimension, Weight and Environment ...................................................1
Typical Consumption ...............................................................................................2
Microprocessor.........................................................................................................2
Chipset .....................................................................................................................2
System Memory .......................................................................................................2
Display Function ......................................................................................................2
LAN Function ..........................................................................................................3
Audio Function ........................................................................................................3
Power Feature ..........................................................................................................3
Expansion Bus .........................................................................................................3
Watchdog Function ..................................................................................................3
I/O Connector...........................................................................................................3
Chapter 2 Installation....................................................................................................5
Product Outline ........................................................................................................5
Locations of Connectors ..........................................................................................6
Structure...................................................................................................................7
Display Connector....................................................................................................9
LVDS Backlight Control Connector ......................................................................10
Audio Connector ....................................................................................................10
Serial Port...............................................................................................................11
SATA Connector .................................................................................................... 11
Hot-swap of SATA Hard Disk................................................................................12
LAN Port................................................................................................................14
USB Port ................................................................................................................15
2-in-1 Mouse/Keyboard Connector........................................................................15
GPIO Connector.....................................................................................................16
Status Controlling Connector on Front Panel.........................................................16
Power Connector....................................................................................................17
CPU Fan Connector ...............................................................................................17
CF Connector.........................................................................................................18
PCI-104 Bus Expansion Connector........................................................................19
Chapter 3 BIOS Setup ................................................................................................20
BIOS Overview......................................................................................................20
BIOS Parameter Setup ...........................................................................................20
Basic Function Setting for BIOS............................................................................21
Chapter 4 Install the Drivers.......................................................................................38
Appendix ....................................................................................................................39
Watchdog Programming Guide ..............................................................................39
Digital IO Program Guide......................................................................................41
Troubleshooting and Solutions...............................................................................44
Chapter 1 Product Introduction
EC3-1813 SERIES - 1 -
Chapter 1 Product Introduction
Overview
EC3-1813 is an embedded motherboard with low power consumption, which is
developed basing on Intel® Luna Pier Refresh platform and is compliant with 3.5″
single-board specification.
The board adopts Intel®Atom™N450 processor + ICH8M technique solution
on-board. It provides one SO-DIMM DDR2 slot and 1GB DDR2 memory on-board,
up to 2GB. Support VGA, LVDS (18bit) display (Clone or expansion mode); two
10/100/1000Mbps Ethernet controllers (EC3-1813CLDNA only supports one
10/100/1000Mbps Ethernet controller); support PCI-104 bus expansion; four USB2.0
ports; two SATA connectors; one Type I/II CF connector; one HD Audio connector;
four COMs (one of which supports RS-232/ RS-422/ RS-485); one PS/2
keyboard/mouse connector; the board adopts 12V single power supply.
The product adopts Intel® low power consumption solution; the small dimension
design enables the product can be applied in mechanical control, e-police, information
station, medical device and various instrumentation, etc.
Mechanical Dimension, Weight and Environment
Dimension: 129mm (L) × 146.1mm (W) × 28mm (H);
Net Weight: EC3-1813CLD2NA: 195.7g;
EC3-1813CLDNA: 194.7g;
Operating Environment:
Temperature: -20℃~ 60℃;
-20℃~ 70℃(with cooling fan);
Humidity: 5% ~ 95% (non-condensing);
Chapter 1 Product Introduction
- 2 - EC3-1813 SERIES
Storage Environment:
Temperature: -40℃ ~ 80℃;
Humidity: 5% ~ 95% (non-condensing);
Typical Consumption
CPU: on-board Intel® Atom™ N450 1.66GHz
Memory: on-board SAMSUNG 1GB DDR2 667MHz memory + 1GB Apacer DDR2
667MHz memory bank
[email protected]; +5%/-3%;
Microprocessor
On-board Intel® Atom™ N450 CPU with 1.66GHz main frequency; internal integrate
memory controller and graphic controller.
Chipset
Intel® Pineview-M + Intel® ICH8M;
System Memory
Support maximum memory capacity up to 2GB. Wherein, it has 1GB DDR2 memory
on-board and provides one 200 Pin DDR2 memory slot, which supports Un-buffered
and NON-ECC DDR2 667MHz memory bank up to 1GB.
Display Function
Adopt Pineview-M chip integration, which assigns display memory according to
requirement and supports VGA + LVDS dual-display function. CRT supports
maximum resolution up to 1400x1050@60Hz; LVDS supports maximum resolution
up to 1280x800 or 1366x768.
Chapter 1 Product Introduction
EC3-1813 SERIES - 3 -
LAN Function
Provide one 10/100/1000Mbps standard RJ45 LAN port; support Wake-on-LAN
function. In addition, EC3-1813CLD2NA also provides one LAN port educed out via
one 2×7Pin header.
Audio Function
Adopt ALC888 sound effect chip, support MIC-IN, LINE-IN and LINE-OUT
function.
Power Feature
Adopt 4Pin standard power connector, support 12V single power supply.
Expansion Bus
Provide one PCI-104 slot, can expand four PCI Masters.
Watchdog Function
Support 255 levels, programmable by minute or second;
Support watchdog timeout interrupt or reset system.
I/O Connector
Four COMs. COM1 is educed out via DB9 connector and supports Modem
wake-up function; the other three COMs are educed out via 2×5Pin header.
Wherein, COM2 supports RS-232/ RS-422/ RS-485 mode while the other three
only supports RS-232 mode;
One CF card connector;
Two SATA connectors;
One HD Audio connector, educed out via 2×5Pin;
Four USB2.0 ports, USB1 is educed out via connector directly while USB2 is
Chapter 1 Product Introduction
- 4 - EC3-1813 SERIES
educed out via 2×5Pin header;
One PS/2 connector, educed out via 2-in-1 connector;
One 8-bit digital I/O connector, educed out via 2×5Pin header.
Chapter 2 Installation
EC3-1813 SERIES - 5 -
Chapter 2 Installation
Product Outline
H1 H2
H4
H3
H5
H6
H7
Unit: mm
Warning!
Please adopt appropriate screws and proper installation methods (including
board location, CPU and heat sink installation, etc); otherwise, the board may be
damaged. It is recommended to use GB9074.4 M3×6 screws at H1 ~ H7.
Este manual sirve para los siguientes modelos
2
Tabla de contenidos
Otros manuales de Placa madre de EVOC
EVOC
EVOC CPC-1814CLD5NA-N Manual de usuario
EVOC
EVOC EC0-1814 Manual de usuario
EVOC
EVOC CPC-3813CLD3N Manual de usuario
EVOC
EVOC EC5-1817LNAR Manual de usuario
EVOC
EVOC ec3-1813cld2na Manual de usuario
EVOC
EVOC NET-1821VD2N Manual de usuario
EVOC
EVOC EC0-1815V2NAR Manual de usuario
EVOC
EVOC EC0-1818-C236 Manual de usuario
EVOC
EVOC EC7-1813CLD2NA SERIES Manual de usuario
EVOC
EVOC 104-1649CLD2NA Series Manual de usuario
Manuales populares de Placa madre de otras marcas
Telit Wireless Solutions
Telit Wireless Solutions SL869-3DR Manual de usuario
Gigabyte
Gigabyte GA-9IVDT Manual de usuario
Texas Instruments
Texas Instruments ADS8372EVM Manual de usuario
Commell
Commell MS-C73 Manual de usuario
IBT Technologies
IBT Technologies MB860 Manual de usuario
Nvidia
Nvidia TEGRA DG-04927-001_V01 Manual de usuario
