Announcement
What containedin this User Manual does not represent the commitments of EVOC
Company. EVOC Company reserves the right to revise this User Manual, without
priornotice,andwillnotbeheldliableforanydirect,indirect,intendedorunintended
lossesand/orhiddendangersduetoinstallationorimproperoperation.
EVOC is a registered trademark of EVOC Intelligent Technology Co., Ltd. All
trademarks,registeredtrademarks,andtradenamesusedinthisUser’sGuidearethe
propertyoftheirrespectiveowners.
EVOCIntelligentTechnologyCo.,Ltd.©2008,CopyrightReserved.Nopartofthis
manual may be reproduced in any form or by any means, such as in electronic or
mechanical way,withoutpermissioninwritingfromEVOC.
SafetyInstructions
1. Pleasecarefullyreadtheusers’manualbefore handling theproduct;
2. Beforeinserting,removingorreconfiguringthe boards,pleasefirstly disconnect
theACpowerorunplugtheACpowercablefromthepowersourcetoprevent
damagetotheproductandensureyourpersonalsafety;
3. Before removing this product, please firstly unplug the AC cable from power
source;
4. When inserting or removing boards, please firstly unplug the AC power cable
frompowersources;
5. Beforeconnectingordisconnectinganysignalcable,makesureallpowercables
areunpluggedinadvance;
6. Toavoidunnecessarydamagecausedbyturningon/offcomputerfrequently,wait
atleast30secondsbeforereturningonthecomputer.
7. Alltheoperationssuchasupgrade,removeorinstallationshallbeimplemented
on the ESD worktable, because some exactitude components are sensitive to
electrostaticdischarge(ESD).
8. Ifthere'snoESDworktable,pleasetakethefollowingstepstopreventdamage
fromelectrostaticdischarge(ESD):
a) Wear a antistatic wrist strap and connect it with the metal part of the
correspondingproduct;
b) Alwaystouchthemetalchassisorframebeforetouching anycomponents;
c) Keeppartofyourbodyincontactwiththemetalchassistodischargethe
staticwhilehandlingcomponents;
d) Avoidallunnecessarymovement;
e) Holdthecomponents (especiallythe boards)bytheedges;
f) Placethecomponentsonagrounded,staticfreeoperatingplatform.Usea
conductivefoampadifavailable (notthecomponentwrapper).
g) Donotletthecomponentsslideontheoperatingplatform.
9. Usecrossheadscrewdrivertooperate.Amagneticscrewdriverisrecommended
(magnet helps to collect screws). Do not leave any tools or screws inside the
chassis;
10. Assureabundantcoolingandventilation.
