Evinrude B10R4 Manual

E10R4, E10RL4, E10TEL4, E10EL4, E10TPL4, E10PL4, E10TPX4, E10PX4

9.8 HORSEPOWER

2012 and "AA" Models

216182

Operator’s Guide

*216182*

B10R4, B10RL4, B10TEL4, B10EL4, B10TPL4, B10PL4, B10TPX4, B10PX4

003-16231-0 1112NB

Printed in Japan

OM_E_10HP_cover_111215.indd 1 11/12/15 15:36

READ THIS MANUAL BEFORE USING THE OUTBOARD MOTOR. FAILURE TO FOLLOW THE

INSTRUCTIONS AND SAFETY PRECAUTIONS IN THIS MANUAL CAN RESULT IN SERIOUS

INJURY OR DEATH. KEEP THIS MANUAL IN A SAFE LOCATION FOR FUTURE REFERENCE.

or transmitted in any from or by any means without the expressed written permission of BRP

US Inc.

OM_E_3.5HP_cover_111215.indd 2 11/12/15 15:37

Your Evinrude 4-Stroke Outboard

OWNER REGISTRATION AND IDENTIFICATION

Upon purchasing this product, be sure that the WARRANTY CARD is correctly and

completely lled out and mailed to the addressee noted there on. This WARRANTY

CARD identies you as the legal owner of the product and serves as your warranty

registration.

TO THE EXTENT PERMITTED BY APPLICABLE LAW, YOUR OUTBOARD

WILL NOT BE COVERED BY THE APPLICABLE LIMITED WARRANTY, IF THIS

PROCEDURE IS NOT FOLLOWED.

PRE-DELIVERY CHECK

Be sure that the product has been checked by an authorized Evinrude dealer before

you take delivery.

Limited Warranty

Please refer to the BRP Limited warranty provided to you with this product, the

terms and conditions of which, as amended from time to time, are incorporated by

reference into the manual.

READ THIS MANUAL BEFORE USING THE OUTBOARD.

FAILURE TO FOLLOW THE INSTRUCTIONS AND SAFETY

PRECAUTIONS IN THIS MANUAL CAN RESULT IN SERIOUS

INJURY OR DEATH. KEEP THIS MANUAL IN A SAFE LOCATION

FOR FUTURE REFERENCE.

OM_E_10HP_body_111213.indd 3 11/12/13 13:23

Product References, Illustrations and Specications

BRP reserves the right to make changes at any time, without notice, to features,

specications and model availability, and to change any specication or part at any

time without incurring any obligation to update older models. The information in the

Guide is based on the latest specications available at the time of publication.

Photographs and illustrations used in this Guide might not depict actual models or

equipment but are intended as representative views for reference only.

Certain features of systems discussed in this Guide might not be found on all mod-

els in all marketing areas.

Owner’s Identication

United States and Canada — At the time of purchase, your Dealer will complete

your outboard registration forms. Your portion provides proof of ownership and date

of purchase.

Outside United States and Canada — See your Dealer or distributor for details.

Model and Serial Numbers

The model and serial numbers appear on a plate attached to the stern bracket or

swivel bracket. Record your outboard’s:

Model Number _______________________

Serial Number _______________________

Purchase Date _______________________

Ignition Key Number __________________

Stolen Outboards

United States and Canada — Report stolen outboards to your local dealer or dis-

tributor.

Outside United States and Canada — Report the theft to the Bombardier Recre-

ational Products distributor where the outboard was registered.

Technical Literature

BRP offers technical literature specically for your outboard. A service manual, a

parts catalog, or an extra Operator’s Guide can be purchased from your selling

Dealer. For the name and location of the nearest Evinrude Dealer in the United

States and Canada visit www.evinrude.com.

OM_E_10HP_body_111213.indd 4 11/12/13 13:23

CONTENTS

GENERAL SAFETY INFORMATION 8

SPECIFICATIONS 10

NAMES OF PARTS 12

LOCATIONS OF WARNING LABELS 14

INSTALLATION 15

1. Mounting the outboard motor on boat 15

2. Installing the remote control devices 18

3. Installing the battery 21

PRE-OPERATING PREPARATIONS  22

1. Recommended gasoline types 22

2. Low permeation fuel hose requirement 23

3. EPA pressurized portable fuel tank requirements 24

4. EPA approval primer valve/hose assembly 24

5. Recommended engine oil 25

6. Break-in 26

7. Engine oil warning lamp 27

8. ESG (A device preventing over revolution) 27

ENGINE OPERATION 28

Before starting  28

1. Filling the fuel 28

2. Feeding the fuel 30

3. Starting 31

4. Warming up the engine 35

5. Forward and reverse 36

6. Stopping 38

7. Trim angle 39

8. Tilt up, tilt down and shallow water operation 45

9. Shallow water operation 47

REMOVING AND CARRYING THE OUTBOARD MOTOR 49

1. Removing the outboard motor 49

2. Carrying the outboard motor 49

3. Storing the outboard motor 49

TRAILERING 50

ADJUSTMENT 51

1. Steering friction 51

2. Throttle grip 51

3. Remote Control Lever Load 52

4. Trim Tab Adjustment 52

INSPECTION AND MAINTENANCE 53

1. Daily inspection 54

OM_E_10HP_body_111213.indd 5 11/12/13 13:23

2. Periodic inspection 60

3. Off-season storage 65

4. Pre-season check 66

5. Motor submerged in water 66

6. Cold weather precautions 67

7. Checking after striking underwater object 67

TROUBLESHOOTING 68

TOOL KIT AND SPARE PARTS 71

OPTIONAL ACCESSORIES 72

PROPELLER TABLE 73

Product Warranty Information 74

California Emission Control Warranty Statement 77

Product Warranty Information 79

Product Warranty Information 82

Readiness Test 85

Frequently Asked Questions 86

Change of Address / Change of Ownership  88

Conﬁrmation of Receipt 90

OM_E_10HP_body_111213.indd 6 11/12/13 13:23

INDEX

1. SPECIFICATIONS

2. NAMES OF PARTS

3. LOCATIONS OF WARNING LABELS

4. INSTALLATION

5. PRE-OPERATING PREPARATIONS

6. ENGINE OPERATION

REMOVING AND CARRYING THE OUTBOARD MOTOR

8. TRAILERING

9. ADJUSTMENT

10. INSPECTION AND MAINTENANCE

11. TROUBLESHOOTING

12. TOOL KIT AND SPARE PARTS

13. OPTIONAL ACCESSORIES

14. PROPELLER TABLE

GENERAL SAFETY INFORMATION

OM_E_10HP_body_111213.indd 7 11/12/13 13:23

8GENERAL SAFETY INFORMATION

NOTICE : DANGER/WARNING/CAUTION/Note

Before installing, operating or otherwise handling your outboard motor, be sure to

thoroughly read and understand this Operator's Guide and carefully follow all of

the instructions. Of particular importance is information preceded by the words

"DANGER," "WARNING," "CAUTION," and "Note." Always pay special attention to

such information to ensure safe operation of the outboard motor at all times.

EMERGENCY STOP SWITCH

The Emergency Stop Switch will stall the outboard motor when the stop switch

tether is pulled off. This stop switch tether can be attached to the operator of

the outboard motor to minimize or prevent injuries from the propeller in case the

operator falls overboard.

We highly recommend use of the Emergency Stop Switch tether.

Failure to observe will result in severe personal injury or death, and possibly property damage.

DANGER

Note

This instruction provides special information to facilitate the use or maintenance of the

outboard motor or to clarify important points.

Failure to observe could result in personal injury or property damage.

CAUTION

WARNING

Failure to observe could result in severe personal injury or death, or property damage.

WARNING

Accidental activation of the Emergency Stop Switch (such as the tether being pulled out

in heavy seas) could cause passengers to lose their balance and even fall overboard, or it

could result in loss of power in heavy seas, strong currents, or high winds. Loss of control

while mooring is another potential hazard.

To minimize accidental activation of the Emergency Stop Switch, the 500 mm (20 inch.)

stop switch tether is coiled and can extended to a full 1,300 mm (51 inch.).

GENERAL SAFETY INFORMATION

OM_E_10HP_body_111213.indd 8 11/12/13 13:23

GENERAL SAFETY INFORMATION

SAFE OPERATION OF BOAT

As the operator/driver of the boat, you are responsible for the safety of those

aboard and those in other boat around yours, and for following local boating

regulations. You should be thoroughly knowledgeable on how to correctly operate

the boat, outboard motor, and accessories. To learn about the correct operation

and maintenance of the outboard motor, please read through this manual carefully.

It is very difﬁcult for a person standing or ﬂoating in the water to take evasive action

should he or she see a power boat heading in his /her direction, even at a slow

speed. Therefore, when your boat is in the immediate vicinity of people in the water,

the outboard motor should be shifted to neutral and shut off.

SERVICING, REPLACEMENT PARTS & LUBRICANTS

We recommend that only an authorized service shop perform service or

maintenance on this outboard motor. Be sure to use genuine parts, genuine

lubricants, or recommended lubricants.

MAINTENANCE

As the owner of this outboard motor, you should be acquainted with correct

maintenance procedures. It is the operator's responsibility to perform all safety

checks and to ensure that all lubrication and maintenance instructions are

complied with for safe operation. Please comply with all instructions concerning

lubrication and maintenance. You should take the engine to an authorized dealer

or service shop for periodic inspection at the prescribed intervals.

Correct periodic maintenance and proper care of this outboard motor will reduce

the chance of problems and limit overall operating expenses.

MOUNTING

Outboard motor mounting must be performed by trained service person(s) using

lift or hoist with sufﬁcient capacity.

WARNING

SERIOUS INJURY IS LIKELY IF A PERSON IN THE WATER MAKES CONTACT WITH

A MOVING BOAT, GEAR HOUSING, PROPELLER, OR ANY SOLID DEVICE RIGIDLY

ATTACHED TO A BOAT OR GEAR HOUSING.

OM_E_10HP_body_111213.indd 9 11/12/13 13:23

SPECIFICATIONS

MODEL

Item R TE E

Overall Length mm (in) 975 (38.4) 590 (23.2)

Overall Width mm (in) 354 (13.9) 320 (12.6)

Overall Height S·L·XL mm (in) 1,035 (40.7) · 1,162 (45.7) · 1,289 (50.7)

Transom Height S·L·XL mm (in) 435 (17.1) · 562 (22.1) · 689 (27.1)

Weight

S Kg (lb) 37.0 (81.5) 40.0 (88.0) 40.0 (88.0)

L Kg (lb) 38.0 (84.0) 41.0 (90.5) 41.0 (90.5)

XL Kg (lb) 39.5 (87.0) 42.5 (93.5) 42.5 (93.5)

Output kW (Hp) 7.2 (9.8)

Max. Operating Range rpm 5,000-6,000

Idle Speed in Forward Gear rpm 900

Idle Speed in Neutral Gear rpm 950

Engine Type 4-Stroke

Number of Cylinder 2

Bore × Stroke mm (in) 55 × 44 (2.17 × 1.73)

Piston Displacement mL (Cu in) 209 (12.8)

Exhaust System Through hub exhaust

Cooling System Water cooling

Engine Lubrication Trochoid pump

Startring System Manual Electric starter motor ＊

Ignition System Flywheel Magneto C.D. ignition

Spark Plug NGK DCPR6E

Trim Position 6 3

Engine Oil NMMA FC-W certiﬁed 10W-30 or

API SF, SG, SH, SJ, SL or SM, 10W-30/40, Approx. 800mL

Gear Oil Genuine Gear Oil or API GL5,

SAE #80-90, Approx. 320mL

Fuel Unleaded regular gasoline : Pump posted 87 Octane

(research octane rating of 91)

Fuel Tank Capacity L (US gal) 12 (3.17)

Gear Reduction Ratio 2.08 (13 : 27)

Emission Control System Engine modiﬁcation (EM)

Operator Sound Pressure

(ICOMIA 39/94) dB(A) 77.2

Hand Vibration Level

(ICOMIA 38/94) m/sec2 2.2 —

＊: with manual ※Speciﬁcations subject to change without notice.

SPECIFICATIONS

OM_E_10HP_body_111213.indd 10 11/12/13 13:23

Este manual sirve para los siguientes modelos

Tabla de contenidos

Otros manuales de Motor fuera de borda de Evinrude

Evinrude

Evinrude 30 HORSEPOWER MFE Manual

Evinrude

Evinrude 90 E-TEC Manual de usuario

Evinrude

Evinrude E-TEC 90 H.O. Manual de usuario

Evinrude

Evinrude E-Tec Manual

Evinrude

Evinrude e-tec 2005 Manual de usuario

Evinrude

Evinrude FISHERMAN 6902 Manual de usuario

Evinrude

Evinrude FPL115 Manual

Evinrude

Evinrude 85895 Manual de usuario

Evinrude

Evinrude E150DBXSE Manual

Evinrude

Evinrude 100 Manual

Evinrude

Evinrude E-tec 75 HP Manual de usuario

Evinrude

Evinrude E-TEC E40DRLSCB Manual de usuario

Evinrude

Evinrude 30 HORSEPOWER MFE Manual

Evinrude

Evinrude B4R4 Manual

Evinrude

Evinrude E-TEC 40RL 2008 Manual

Evinrude

Evinrude E-TEC G2 Manual

Evinrude

Evinrude E-Tec Manual

Evinrude

Evinrude Fleetwin 4447 Manual de usuario

Evinrude

Evinrude E-TEC G2 Manual de usuario

Evinrude

Evinrude E15D Manual

Evinrude

Evinrude E-TEC 200 Manual de usuario

Evinrude

Evinrude 4906B 4HP 1969 Manual de usuario

Evinrude

Evinrude E25RSES Manual

Evinrude

Evinrude E-Tec Manual

Manuales populares de Motor fuera de borda de otras marcas

Yamaha

Yamaha VF150 Manual de usuario

Sleipner

Sleipner SEP-IP30 Manual de usuario

Suzuki

Suzuki DF 40 Manual de usuario

SELVA MARINE

SELVA MARINE Corse Manual de usuario

TOHATSU

TOHATSU BFT 250A Manual de usuario

KONRAD

KONRAD Series 600B Manual de usuario

Mercury

Mercury 8 Bigfoot 4-Stroke Guía de instalación

Sleipner

Sleipner E-Vision Electric Thruster E300 Manual de usuario

Suzuki

Suzuki DF40A Manual de usuario

IST

IST 18.BF200D Manual de usuario

Side-Power

Side-Power SP 155 TC i Manual de usuario

Mercury

Mercury 40 FourStroke Manual de usuario

Quick

Quick BTR250 Manual de usuario

Yamaha

Yamaha VF90 Manual de usuario

Yamaha

Yamaha D150H Manual de usuario

Yanmar

Yanmar ZT350 series Manual de usuario

MotorGuide

MotorGuide X3-40 Manual de usuario

Mercury

Mercury 30 - 60 HP Manual de usuario