Features
STABLE POWER
The Gold series has outstanding electrical performance with ultra stable voltage and extremely clean power
output. This can help you achieve the highest possible overclock (optional) and provide the most stable and reliable
power to all components. The Gold series also provides 90% (115VAC) / 92%(220VAC~240VAC) efficiency
and is 80 PLUS GOLD certified.
TOP QUALITY PROTECTIONS
The SuperNOVA GOLD series comes equipped with the most comprehensive protection set possible, including
Over Voltage Protection (OVP), Under Voltage Protection (UVP), Over Power Protection (OPP), Short Circuit
Protection (SCP), and Over Current Protection (OCP). This product is also covered by an exceptional 10-year
warranty and EVGA’s legendary customer service and support.
SUPERIOR BUILD QUALITY
The SuperNOVA GOLD series is built to the highest standards, using 100% Japanese capacitors on main board
rated at 105 degrees Celsius and high quality brand-name semiconductor components for the highest performance
and reliability. The Ultra Quiet 140mm double ball bearing fan provides adequate cooling to allow near silent
operation when not needed and proper cooling during heavy load operation.
MODULAR DESIGN
Reduce clutter in the case, improve ambient temperatures with better airflow overall and provide a clean look to
any system. Fully Modular PSU designs allow the user to disconnect the cable from the power supply side if they
are not needed for the specific configuration. This can help free up space inside the case and improve cable
management as well as airflow throughout the system. EVGA offers fully modular designs on all G2 series and
include a cable storage bag in case you plan to upgrade or add more components for storage.
Installation
1. Remove the power supply from its packaging.
2. (Optional) Using the provided PSU testing tool, connect the 24-Pin cable to the
PSU, then attach the testing tool to the 24-Pin cable. Connect the ATX power cable
to the PSU and plug the PWR cable into the outlet or surge protector/UPS you plan
to use. Once connected, turn the power switch to the ON position. (If the ECO
mode is set to ON, the fan will not spin)
Please note: If you are using a water cooling configuration, this testing tool
provides a simple, safe, option for bleeding/draining/testing water cooling
components without the need of a paperclip or other device.
ECO THERMAL CONTROL SYSTEM
The EVGA ECO Intelligent Thermal Control System provides silent operation at low loads, improved efficiency
and longer life span of the fan. Enabled by a simple switch directly on the power supply, the “No Fan Spin” feature
is ideal for users looking to reduce ambient noise overall. Save on energy costs and unnecessary fan usage with
the EVGA ECO Thermal Control System.
1000W / 1300W GOLD Power Supply User Manual
English
3
