1 Temperature indicator
Temperature Control button
H0: No temperature H1-H5: 5 different temperature ranges
Summer setting: H1 Winter setting: H5
3Auto mode
Press “AUTO”, then press any number, machine will out feed one same
piece with preset length once the former one is taken away. Press”
AUTO” again to cancel the automatic mode. This model could be used
together with” COMBINED” mode.
7Define tape length 8Present tape length
9X2 Double length button
X2 button will double the selected tape length.
For example: In order to dispense 30CM tape, first press” X2” button, then
press the number “15” .
10 Length adjustment button
“+1” button adds 1cm to selected tape length;
”-1” button subtracts 1cm from selected length;
For example: In order to dispense 17CM tape, press” +1” button twice,
then pres the number button”15”
11 Manual feed button
Output tapes so long as this button is pressed, minimum length 13cm.
12Define length button
For example: In order to make the machine to remember and dispense
115CM all the time, first press”X2” -> ”+1” five times -> ”55”, then long
press”DEFINE” button until the display shows” Def: 115” -> finished.
Every time when you press” DEFINE” button, it will dispense 115CM.
Single piece/Combined pieces mode switch button
2
5
4
6
Combined pieces mode
For example: In order to dispenser different sizes:
15-35-55CM continously.
First, press” MODE” to change to “ COMB” mode;
Second, press” SET” -> ”15” -> ”35” -> ”55”- > ”END”，Third, press”
START”, machine will dispense 15CM, 35CM then 55CM. Press” MODE”
again to return back from” COMB” to “ FIXED” mode.
(*will indicate current number in group if comb mode is on)
Evers GmbH Graf-Zeppelin-Str. 10 46149 Oberhausen Telefon +49208 99475-0 Telefax +49208 99475-31 evers@eversgmbh.de eversgmbh.de
