Everlasting Comfort HD-008 Manual de usuario

Inspect Unit Before Use.

Contact [email protected] immediately for any damaged or defective units.

READ AND SAVE THESE INSTRUCTIONS

Heavy-Duty Boot Dryer User Manual

TABLE OF CONTENTS

COMPONENTS

SAFETY

OPERATION

MAINTENANCE

HELPFUL TIPS

TROUBLESHOOTING

SPECIFICATIONS

1. COMPONENTS

Fig. 1

FRONT VIEW

HELMET STRETCHER

SHOE STRETCHER

BACK DRYING TUBES

FRONT DRYING TUBES

LOCKING BUTTONS

BLOWER ASSEMBLY

OZONE SWITCH

MAIN BODY

BASE

DRIP TRAYS

TIMER KNOB

HEAT/NO HEAT SWITCH

Fig. 2

BACK VIEW

SHOE STRETCHER

BACK DRYING TUBES

FRONT DRYING TUBES

POWER SUPPLY CORD

CORD HOLDER

BLOWER ASSEMBLY

DRIP TRAYS

2. SAFETY

PLEASE READ CAREFULLY BEFORE USE & SAVE THESE INSTRUCTIONS

ONLY FOR USE IN A WELL VENTILATED AREA.

DO NOT use on any carpeted surface.

Use this boot dryer only as described in this manual. Any other use not recommended by the manufacturer may cause

fire, electric shock, or personal injury.

DO NOT immerse the dryer in water. Never clean this unit while it’s plugged in. To disconnect, turn controls to the OFF

position, then unplug it from the outlet.

DO NOT allow the inside of the dryer to become wet during operation or in storage. Always store in a dry area free from

potential moisture.

DO NOT use if the power supply cord is damaged. If damaged, it must be replaced by the manufacturer, a certified

service agent, or a similarly qualified person to avoid hazards and electrocution.

WARNINGS

IF YOU HAVE ANY QUESTIONS OR CONCERNS, PLEASE EMAIL US AT

[email protected]

Thoroughly inspect the unit in its entirety for any cracks, chips, or damage that could cause the unit to malfunction.

DO NOT use if damage is found.

Only a professional or authorized repairman should repair this appliance.

Keep the boot dryer and all of it’s packaging away from children and infants.

Before unplugging the power cord, be sure to turn off the unit’s power. When touching the unit ensure your hands are dry

to prevent electric shock.

If the unit has an abnormal sound or odor while in operation, please shut it down immediately and disconnect the power

plug. Any repairs must be done by a professional repairman.

Connect only the electric plug to a secure wall socket.

Make sure the power supply cord is positioned to not be stepped on, tripped over, or otherwise subjected to damage or

stress.

Be sure that no other appliances are in use on the same electrical circuit as your product, or an overload could occur.

To reduce the risk of damage to the power supply cord or outlet, pull the plug instead of the cord when disconnecting the

unit.

Before cleaning or moving the unit, turn off and disconnect the plug from its power source.

The unit is equipped with a polarized plug (one blade is wider than the other). To reduce the risk of electric shock, plug into

a secure wall socket only as intended. If the plug does not fit into the outlet, flip the plug 180 degrees and try again. If it

still does not fit into the socket, contact a professional electrician. DO NOT attempt to modify the plug in any way.

DO NOT block air intake in any manner.

Clean only as instructed in Section 6 Maintenance. DO NOT clean with any other cleaning agents.

DO NOT override the timer control.

DO NOT overload with garments.

DO NOT use outdoors.

Do NOT operate in water.

DO NOT use or add any attachments to the unit that do not come with the unit.

DO NOT use the ‘OZONE’ function in any fully confined spaces.

WHEN USING AN ELECTRICAL APPLIANCE, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE

OBSERVED, INCLUDING THE FOLLOWING:

Place the unit on a firm, flat and dry surface, never carpeted.

DO NOT use this appliance in any kind of flammable environment.

Keep unit away from any heat source, i.e. heaters, furnaces, and avoid direct sunlight.

Industrial or household use only.

OPERATING ENVIRONMENT

Slide boots or helmet upside down onto the back

drying tubes. Be careful not to restrict airflow at the

bottom or block airflow into the blower assembly.

DO NOT

COVER

THIS AREA

DO NOT

COVER

THIS AREA

Plug the boot dryer into any standard 120 Volt 60 Hz

electrical outlet.

3. OPERATION

Attach 4 drip trays to the bottom of the unit. Press

the tray onto the bottom feet of the unit and turn

the tray clockwise to secure it in place.

1Attach either the 2 interchangeable shoe or helmet

stretchers to the back drying tubes.

Select the HEAT or NO HEAT setting by pressing

the switch to either use room temperature air or to add

heat.

TO COMPACT

Press the two side

locking buttons on the

drying tube

simultaneously and slide

the drying tube down.

TO EXTEND

Pull the drying tubes

up to adjust the

height, accommodates

boots up to 16” tall.

Adjust the height of the drying tubes:

The boot dryer only heats to a safe and gentle temperature to prevent damage to garments. It is not a hairdryer and is

not designed to emit a powerful current of air through garments.

DO NOT cover air circulation whenever placing gloves, mittens, children’s boots or shoes onto the drying tubes or

drying nozzles. Always use attachments as instructed.

To prevent bacteria and fungus growth in your footwear, the primary cause of odor, make sure to dry after each use.

Smaller footwear and garments will take less time to dry.

Your energy-efficient boot dryer heats to a gentle temperature of around 122 Fahrenheit/50 centigrades based on the

room temperature and uses Forced Air technology to quickly dry wet garments, but it does not generate a forceful air

stream that might damage or deform garments.

5. HELPFUL TIPS

Optional: You can place gloves or a different pair of shoes on the front smaller drying tubes. The front drying tubes are

specifically designed for drying tennis shoes, socks, gloves, hats, kids’ shoes, or any other small-sized garment.

Turn off and unplug the unit from the wall before cleaning. Use mild soap on a damp cloth to clean the external surface

of the boot dryer and its components. Do not let any liquid get inside of the motor located on the main body of the unit.

To properly store the unit:

A. Wrap the power cord around the designated power cord system on the back of the unit.

B. Slide all drying tubes down to their original position.

C. Let the unit dry for 24 hours before storing. We suggest storing in a cool ventilated area away from small children

and infants.

4. MAINTENANCE

To sanitize and deodorize your footwear or garment,

flip the Ozone switch to the ON position.

HELPFUL TIP:

Open all windows or doors to enhance air circulation

whenever using this function.

Turn the timer knob clockwise to the 180-minute

mark to activate the timer switch, then turn the

knob counterclockwise back to the desired drying

time. The timer will automatically shut off the unit

when allotted time is reached. Drying times may vary

depending on the extent of moisture as well as the

temperature and humidity. We recommend a

minimum of 1 to 3 hours. Avoid over-drying.

PROBLEM PRIMARY CAUSE SOLUTION

Unit doesn’t sound

like it is on.

Unit is on but may not seem like it. Place the back of your hand near the

drying tubes to feel the gentle warm

air or place footwear and garments

onto the drying tubes for 30-minutes

then touch the inside of the garment

to feel the gentle heat.

Back drying tubes are

shaking.

The back tubes are in the extended

position.

This is normal, the drying tubes are

strong and durable and may shake

slightly when extended.

Unit has an abnormal sound

or burning odor.

You may have received a defective

unit.

Shut it down immediately and

disconnect the power plug. Any

repairs must be done by a

professional repairman.

6. TROUBLESHOOTING

HAVE AN ISSUE WITH YOUR HEAVY-DUTY

BOOT DRYER?

Enjoy hassle-free replacements: if your heavy-duty boot dryer is defective or damaged,

we will ship you a new one ABSOLUTELY FREE.

For fast and knowledgeable service, get in touch with one of our customer service

experts right now!

Email: [email protected]

To check out more of the products we oﬀer visit:

WRITE A MESSAGE

TO SUPPORT

everlastingcomfort.net

Model No.

Voltage

Power

Capacity

Conforms to

Certified to

Max Drying Time

HD-008

120V 60Hz

250 W

4.0L

UL STD.499

CSA STD.C22.2 No.64

180 minutes

7. SPECIFICATIONS

5003917

All parts have been tested

by Intertek and are ETL Certied.

Tabla de contenidos

Manuales populares de Secadora de otras marcas

Bosch

Bosch WTA79200GB Manual de usuario

Amana

Amana W10233410A Manual de usuario

Miele

Miele TWH 780 WP Manual de usuario

Asko

Asko T760 Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems 25 Series Manual de usuario

Bosch

Bosch Logixx 10 WTB76556GB Hoja de especificaciones

STIEBEL ELTRON

STIEBEL ELTRON Ultronic S Manual de instrucciones

Electrolux

Electrolux EW2H328R2 Manual de usuario

Beko

Beko DS8433RX1M Manual de usuario

Dawlance

Dawlance Spinner DS 6000 C Manual de usuario

Electrolux

Electrolux TP5080TW Manual de usuario

AEG

AEG TR838P4OB Manual de usuario

Indesit

Indesit IDV 75 Manual de usuario

Infiniton

Infiniton SD-DG85C Manual de usuario

BOMANN

BOMANN WT 5019 Manual de usuario

Alliance Laundry Systems

Alliance Laundry Systems TMB795C Manual de usuario

Asko

Asko T793C Manual de usuario

Kenmore

Kenmore 8041 - 5.8 cu. Ft. Capacity Electric Dryer Manual de usuario