EverFocus eNVP-JNN-AI-A0000 Manual de usuario
eNVP-JNN-AI-A0000
NVIDIA Jetson® Nano AI BOX
User’s Manual
Copyright © EverFocus Electronics Corp.
Release Date: June 2021
EVERFOCUS ELECTRONICS CORPORATION
eNVP-JNN-AI-A0000
NVIDIA Jetson® Nano AI BOX
User’s Manual
1995-2021 EverFocus Electronics Corp.
www.everfocus.com.tw
Disclaimer
All the images including product pictures or screen shots in this document are for example only. The
images may vary depending on the product and software version. Information contained in this document
is subject to change without notice.
Copyright
All rights reserved. No part of the contents of this manual may be reproduced or transmitted in any form
or by any means without written permission of the EverFocus Electronics Corporation.
-NVIDIA, the NVIDIA logo, and Jetson are trademarks of the NVIDIA Corporation
-ITE is a trademark of Integrated Technology Express, Inc.
-IBM and VGA are trademarks of International Business Machines Corporation.
-Ubuntu is a registered trademark of Canonical
All other product names or trademarks are properties of their respective owners.
ii
Safety Precautions
Please read the following safety instructions carefully. It is advised that you keep this manual
for future references.
All cautions and warnings on the device should be noted.
All cables and adapters supplied by EverFocus are certified and in accordance with the
material safety laws and regulations of the country of sale. Do not use any cables or
adapters not supplied by EverFocus to prevent system malfunction or fires.
Make sure the power source matches the power rating of the device.
Position the power cord so that people cannot step on it. Do not place anything over the
power cord.
Always completely disconnect the power before working on the system’s hardware.
No connections should be made when the system is powered as a sudden rush of power
may damage sensitive electronic components.
If the device is not to be used for a long time, disconnect it from the power supply to avoid
damage by transient over-voltage.
Always disconnect this device from any AC supply before cleaning.
While cleaning, use a damp cloth instead of liquid or spray detergents.
Make sure the device is installed near a power outlet and is easily accessible.
Keep this device away from humidity.
Place the device on a solid surface during installation to prevent falls.
Do not cover the openings on the device to ensure optimal heat dissipation.
Watch out for high temperatures when the system is running.
Do not touch the heat sink or heat spreader when the system is running.
Never pour any liquid into the openings. This could cause fire or electric shock.
As most electronic components are sensitive to static electrical charge, be sure to ground
yourself to prevent static charge when installing the internal components. Use a grounding
wrist strap and contain all electronic components in any static-shielded containers.
If any of the following situations arises, please contact our service personnel
(ts@everfocus.com.tw):
-Damaged power cord or plug
-Liquid intrusion to the device
-Exposure to moisture
-Device is not working as expected or in a manner as described in this manual
-The device is dropped or damaged
-Any obvious signs of damage displayed on the device
DO NOT LEAVE THIS DEVICE IN AN UNCONTROLLED ENVIRONMENT WITH TEMPERATURES
BEYOND THE DEVICE’S PERMITTED STORAGE TEMPERATURES (SEE SPECIFICATION) TO
PREVENT DAMAGE.
iii
FCC Statement
This device complies with Part 15 FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference,
and (2) this device must accept any interference received including
interference that may cause undesired operation.
Caution:
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same
or equivalent type recommended by the manufacturer. Dispose of used batteries according to
the manufacturer’s instructions and your local government’s recycling or disposal directives.
Attention:
Il y a un risque d’explosion si la batterie est remplacée de façon incorrecte.
Ne la remplacer qu’avec le même modèle ou équivalent recommandé par le constructeur.
Recycler les batteries usées en accord avec les instructions du fabricant et les directives
gouvernementales de recyclage.
iv
RoHS Requirements
設備名稱 (Equipment): AI Box，型號（型式）/ Type designation (Type): eNVP-JNN-AI-A0000
單元Ｕnit
限用物質及其化學符號 Restricted substances and its chemical symbols
鉛
Lead
(Pb)
汞
Mercury
(Hg)
鎘
Cadmium
(Cd)
六價鉻
Hexavalent
chromium
(Cr(VI))
多溴聯苯
Polybrominated
biphenyls
(PBBs)
多溴二苯醚
Polybrominated
diphenyl ethers
(PBDEs)
印刷電路板及電
子零組件
PCB & Other
Components
X ○○○○○
外部訊號連接器
及線材
Wires &
Connectors for
Ext. Connections
X ○○○○○
外殼 Chassis
○
○
○
○
○
○
中央處理器與內
存CPU & RAM X ○○○○○
硬碟 HDD Drive
X
○
○
○
○
○
液晶模組 LCD
Module
X X ○○○○
光學驅動 Optical
Drive
X ○○○○○
觸控模組 Touch
Control Module
X ○○○○○
電源 PSU
X
○
○
○
○
○
電池 Battery
X
○
○
○
○
○
本表格依據 SJ/T 11364的規定編制。This form is prepared in compliance with the provisions of SJ/T
11364.
O：表示有毒有害物質在該部件所有均質材料中的含量均在GB/T 26572標準規定的限量要求以下。
O：The level of toxis or hazardous materials present in this component and its parts is below the limit
specified by GB/T 26572.
X：表示該有毒物質的某一均質材料超出了GB/T 26572的限量要求，然而該部件仍符合歐盟指令
2011/65/EU的規範。
X：The level of toxic of hazardous materials present in the component exceed the limits specified by
GB/T 26572, but is still in compliance with EU Directive 2011/65/EU (RoHS 2).
備註 Notes:
1. 此產品所標示之環保使用期限，係指在一般正常使用狀況下。
The Environment Friendly Use Period indicated by labeling on this product is applicable only to use
under normal conditions.
2. 上述部件物質中央處理器、内存、硬碟、光學驅動、電源為選購品。
Individual components including the CPU, RAM/memory, HDD, optical drive, and PSU are optional.
3. 上述部件物質液晶模組、觸控模組僅一體機產品適用。
LCD Module and Touch Control Module only applies to certain products which feature these
components.
v
TABLE OF CONTENTS
1. Introduction ............................................................................................................................ 1
1.1 Product Notice ................................................................................................................ 1
1.2 Features .......................................................................................................................... 2
1.3 Dimensions...................................................................................................................... 2
1.4 Packing List...................................................................................................................... 3
1.5 Optional Accessories....................................................................................................... 3
1.6 Physical Description ........................................................................................................ 3
2. Installation .............................................................................................................................. 5
2.1 M.2 Module installation.................................................................................................. 5
3. Jumpers and Connectors on the Motherboard ...................................................................... 6
3.1 List of Jumpers ................................................................................................................ 7
3.1.1 Setting Jumpers........................................................................................................... 8
3.1.2 AT/ATX Mode Select(CN1 Pins 7-8) ............................................................................ 8
3.2 List of Connectors ........................................................................................................... 9
3.2.1 Front Panel Connector (CN1).................................................................................... 10
3.2.2 DC Power In Connector (CN2)................................................................................... 10
3.2.3 USB 2.0 Connector for Flash Image (CN3) ................................................................ 11
3.2.4 LAN RJ45 Port (CN4).................................................................................................. 11
3.2.5 HDMI Connector (CN5) ............................................................................................. 12
3.2.6 Dual USB 3.2 Gen 1 Connector (CN6/CN7)............................................................... 13
3.2.7 RTC Battery Connector (CN8) ................................................................................... 13
3.2.8 +5V Output for SATA HDD (CN9/CH10) .................................................................... 14
3.2.9 COM Port Connector (System).................................................................................. 15
3.2.10 Jetson Nano CPU Module Connector (CN12) ....................................................... 16
3.2.11 UART Debug Port Connector (CN15) .................................................................... 17
4. Specification.......................................................................................................................... 18
eNVP-JNN-AI-A0000
1
1. Introduction
Everfocus eNVP-JNN-AI-A0000 is a compact AI Box based on NVIDIA ® Jetson Nano ™ designed for
general and commercial market.
With its Quad-core ARM® Cortex®-A57 MPCore processor and various interfaces including 1 HDMI
display output, 4 USB Gen 1 ports, 2 COM ports, and 1 GbE LAN port, the eNVP-JNN-AI-A0000 aims
to deliver high-quality performance for your computing applications.
This model also comes with EverFocus in-house designed software, providing basic NVR functions
of real-time live view, video recording, video playback, alarm notification and etc.
1.1 Product Notice
Micro-USB: Micro-USB port is ideally for flashing image only.
USB ports: USB ports do not support USB DVD ROM because of file system.
USB 3.2 Gen 1: USB 3.2 Gen 1 is the current name for 5Gbps specification, formerly USB 3.0.
LAN Indicator Behavior
Chapter
1
eNVP-JNN-AI-A0000
2
1.2 Features
•Fanless AI edge embedded box PC
•Quad-core ARM® Cortex®-A57 MPCore processor
•NVIDIA Maxwell™ architecture with 128 NVIDIA CUDA® cores
•Onboard 4 GB 64-bit LPDDR4 memory
•Supports 1 HDMI display output
•Supports 4 USB 3.2 Gen 1
•Supports 2 RS-232 Port.
•Supports 1 Ethernet Network GbE ports
•CE, FCC certified
1.3 Dimensions
eNVP-JNN-AI-A0000
3
1.4 Packing List
•AI Box x 1
•Power Connector x 1
Note:
1. Equipment configurations and supplied accessories vary by country. Please consult your
local EverFocus office or agents for more information. Please also keep the shipping carton
for possible future use.
2. Contact the shipper if any items appear to have been damaged in the shipping process.
1.5 Optional Accessories
Part Number / Item
4B01XUD12060AT1
Adapter,I:100-240V,O:12V/5A, 2P
47109741364AJ01
9741364A00,M.2 2230 AC WIFI/BT+ANT.
1.6 Physical Description
1 1 3 4 56
Front Panel Rear Panel
2
2
78
Left Right
910
eNVP-JNN-AI-A0000
4
No. Name Description
1 COM Port Two RS-232 ports.
2 ANT Two Antenna ports.
3 Power Button Press the button to turn on or turn off the system.
4 LAN One 10/100/1000 Base-Tx Ethernet ports.
5 USB 3.2 Gen 1 Four USB 3.2 Gen 1 ports.
6 HDMI One HDMI 1.4b video output.
7 DC Power In Connect DC 12V power source to the Power Input port.
8 Recovery Press to restore to factory default.
9 OS Flash One OS Flash port.
10 Micro SD Micro SD slot.
Tabla de contenidos
Otros manuales de De oficina de EverFocus
