Everet EVC400 Manual de usuario

EVERET EVC400 –4K Smart Video Conference Camera

Version 1.0

(English)

PACKING LIST

Check all bellow items when open the package:

•Camera

•USB 2.0 Cable

•Mounting screw

•Remote Controller

Product highlights

•Advanced DSP, 1/2.8 inch 8.42 megapixel SONY sensor and

high quality 12 megapixel lens.

•Auto Framing

•All video, control and power over single USB cable.

•Plug & play

•Flexible design: fit for monitor, PC, tripod, wall mount and on

desk mounting.

•USB2.0 YUY2/MJPG/H.264 video format, works with Windows,

MAC OS, Android, Linux.

•Standard UVC 1.1 protocol, compatible with most VC

application.

•Built in dual microphone, pick up distance reach 5m.

•USB2.0 output.

•12 megapixel fixed lens, 4x digital zoom.

•120 degree field of viewing.

•Lens distortion rate less than 4% (120°FOV).

•3840*2160p30 ultra high resolution.

•Mirror, Flip, Anti-flicker feature.

•UVC control (via USB port).

•Audio communication protocol: UAC1.0.

•Audio encoding format: PMC.

Technical Specifications

Sensor

1/2.8 inch high quality, 8.42 megapixel

SONY CMOS sensor

Video Format

YUY2/NV12:

1280*720@15;

1024*576@20;

640*480@30

MJPG:

3840*2160@30;

2560*1440@30;

1920*1080@30;

1280*720@30;

1024*576@30;

640*480@30

H.264/H.265:

3840*2160@30;

2560*1440@30;

1920*1080@30;

1280*720@30;

1024*576@30;

640*480@30

Optical Zoom

12 megapixel fixed lens

Digital Zoom

Field of Viewing

120°

Sensor Resolution

8.42 megapixel

Control Port

USB2.0 (UVC/UAC)

Video Port

USB2.0

S/N Ratio

>50dB

Focal Length

f＝2.20mm

Minimum Lux.

0.1 lux

White Balance

Auto/Manual

Iris

F 2.2

Electronic Shutter

Auto

Autoframing

Supported (up to 1080P30)

Electronic Pan/Tilt/Zoom

Supported (up to 1080P30)

Camera interface

1.Lens

2.Microphone 1

3.Base bracket

4.Microphone 2

5.Remote receiver

6.Indicator light

Dimensions (MM)

Anti-Flicker

50HZ/60HZ/OFF

WDR

Supported

Polar distance

3~5 meters

Sensitivity

-26±2dB RL=2.2KΩ Vs=2.0V

Input Voltage

4.4~5.25V@500mA (USB port)

Dimension(L x W x H)

199mm×92.5mm×65mm

Net Weight

0.32KG

IR REMOTE CONTROLLER

Power: Standby/Start camera. (This button is temporarily disabled.)

Image: on/off.

Preset: long press for 3 seconds to save the current position to the

corresponding preset, short press to run the preset, only available in

manual mode.

Navigation keys: up and down, left and right

In manual working mode, these keys are used to adjust the position

of the electric pan/tilt/zoom and to select menu items after entering the

menu.

Home/Confirm key:

In manual working mode, a short press returns the electric

pan/tilt/zoom to the home wide angle position.

Auto: Turn on Auto Framing.

(Push/Manual):, Switch the manual mode or press for One push Auto frame when already in manual

mode.

Menu: Press to open OSD menu

Zoom keys: +/-

Adjust the magnification of the electronic zoom, only available when Auto Framing is closed.

OSD MENU

1. In normal working mode, press the menu button on the IR

remote, to enter the OSD menu; press the menu button again to

exit and save modified parameters.

2. Use the navigate button to select the main menu. The main menu

will change to blue color background, and the right side will show

all parameters under this sub menu.

3. When enter into the main OSD menu, press the up/down navigate

button to select the sub menu, use left/right navigate button to

set the parameter.

4. If you need to return back the last level menu, navigate to the

“return” label and press the left key to get back to previous menu.

It’s also possible to press the menu button.

5. Press OSD button again to exit the menu.

System

SYSTEM

LANGUAGE

ENGLISH

PROTOCOL

VISCA

Default: VISCA

ADDRESS

VISCA:1~7

Default: 1

BAUDRATE

2400,4800,9600,115200 optional

Default: 9600

RETURN

Back to the main menu

Exposure

EXPOSURE

EXP.MODE

MODE

AUTO/MANU

Default: AUTO

SHUTTER

Shutter speed:1/30~1/10000, only valid under

MANU mode

Default: 1/100

GAIN

Gain setting:0~15, only valid under MANU mode

Default: 0

FLICK

OFF/50HZ/60HZ

Default: 50HZ

BACKLIGHT

ON/OFF

Default: OFF

GAMMA

0~15

Default: 8

RETURN

Back to the main menu

Image

IMAGE

WB MODE

AUTO/MANU

Default: AUTO

B_GAIN

Blue gain level:0~256, only valid under manual

Default: 100

R_GAIN

Red gain level:0~256, only valid under manual

white balance mode

Default: 100

DEFOG

Set the image permeability:OFF/1~15

Default: OFF

RETURN

Back to the main menu

Quality

QUALITY

2D NR

Set 2D noise reduction level:ON/OFF

Default: OFF

3D NR

Set 3D noise reduction level:OFF/AUTO/1~4

Default: AUTO

SHARPNESS

Sharpness setting:0~15

Default: 8

CONTRAST

Contrast setting:0~15

Default: 8

SATURATION

Saturation setting:0~15

Default: 8

BRIGHT

Bright setting:0~15

Default: 8

RETURN

Back to the main menu

CTRL

MIRROR

Turn the screen left and right ON/OFF

Default: OFF

FLIP

Picture up and down (hoisting mode)

ON/OFF

Default: OFF

AUTO FRAME

AUTO/MANU

Default: AUTO

RETURN

Back to the main menu

Reset

RESET

CAM RESET

Reset camera parameter to default

RETURN

Back to the main menu

Info

INFO

CTRL VER

Camera movement control program version

CTRL DATE

Release date of camera movement control program

RETURN

Back to the main menu

Suggested installation options

Model 1: on top of laptop Model 2: on top of monitor

Model 3: on top of flat TV screen Model 4: at the bottom of TV

Model 5: wall mount

Tabla de contenidos

Manuales populares de Cámara IP de otras marcas

FLIR

FLIR Exx series Manual de usuario

Avigilon

Avigilon H4A-BO1-IR Manual de usuario

Digital Watchdog

Digital Watchdog DWCA-C128-64 Manual de usuario

ShareTech

ShareTech AV1 Manual de usuario

Ezviz

Ezviz C6C Manual de usuario

Melchioni

Melchioni UCAM 2015 Manual de usuario

Geutebruck

Geutebruck G-Cam/ESD-4630 Manual de usuario

Arecont Vision

Arecont Vision MegaBall AV3146DN-3310-D-LG Manual de usuario

Mitel

Mitel 6800i Series Manual de servicio

Vitek

Vitek VTC-IR403-212NP Manual de usuario

THOMSON

THOMSON DSC - 323W Manual de usuario

AVer

AVer FB2027 Manual de usuario

ENFORCER

ENFORCER EV-T5105-N2SQ Manual de usuario

Wansview

Wansview NC543 Manual de usuario

Eneo

Eneo MCB-64A0003M0A Manual de usuario

deView electronics

deView electronics CBDNI36F Manual de usuario

Swann

Swann SwannEye Manual de usuario

LevelOne

LevelOne IP CamSecure Manual de usuario